BS EN 61966-7-1-2006 Multimedia systems and equipment - Colour measurement and management - Colour printers - Reflective prints - RGB inputs《多媒体系统和设备 颜色测量和管理 彩色打印机 反射打印 RGB输入法》.pdf

《BS EN 61966-7-1-2006 Multimedia systems and equipment - Colour measurement and management - Colour printers - Reflective prints - RGB inputs《多媒体系统和设备 颜色测量和管理 彩色打印机 反射打印 RGB输入法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61966-7-1-2006 Multimedia systems and equipment - Colour measurement and management - Colour printers - Reflective prints - RGB inputs《多媒体系统和设备 颜色测量和管理 彩色打印机 反射打印 RGB输入法》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58and management Part 71: Colour printers Reflective prints RGB inputsThe European Standard EN 61966-

2、7-1:2006 has the status of a British StandardICS 33.160.60; 35.180; 37.100.10Multimedia systems and equipment Colour measurement BRITISH STANDARDBS EN 61966-7-1:2006BS EN 61966-7-1:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 Octobe

3、r 2006 BSI 2006ISBN 0 580 49416 0Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal ob

4、ligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 61966-7-1:2006. It is identical with IEC 61966-7-1:2006. It supersedes BS EN 61966-7-1:2002 which will be withdrawn on 1 July 2009.The UK participation in its preparation was entrusted to Technic

5、al Committee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on EPL/100 can be obtained on request to its secretary.EUROPEAN STANDARD EN 61966-7-1 NORME EUROPENNE EUROPISCHE NORM August 2006 CENELEC European Committee for Electrotechnical Standardizatio

6、n Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61966-7-1:2006 E IC

7、S 33.160.60; 35.180; 37.100.10 Supersedes EN 61966-7-1:2002English version Multimedia systems and equipment - Colour measurement and management Part 7-1: Colour printers - Reflective prints - RGB inputs (IEC 61966-7-1:2006) Systmes et appareils multimdia -Mesure et gestion de la couleur Partie 7-1:

8、Imprimantes couleur - Imprims par rflexion - Entres RVB (CEI 61966-7-1:2006) Multimediasysteme und -gerte - Farbmessung und Farbmanagement Teil 7-1: Farbdrucker - Reflektierende Drucke - RGB-Eingnge (IEC 61966-7-1:2006) This European Standard was approved by CENELEC on 2006-07-01. CENELEC members ar

9、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

10、the Central Secretariat or to any CENELEC member. This European Standard exists in two official versions (English and German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same s

11、tatus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, P

12、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 100/1061/FDIS, future edition 2 of IEC 61966-7-1, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was a

13、pproved by CENELEC as EN 61966-7-1 on 2006-07-01. This European Standard supersedes EN 61966-7-1:2002. This European Standard includes the following technical changes with respect to EN 61966-7-1:2002: a) In addition to the default illuminant, D50, D65, F11 and illuminant A were added as optional il

14、luminants. b) The numbering of the colour patches in the test-chart file was changed for easy understanding of the measurement location. c) Two test-chart files: short-term instability test chart and spatial non-uniformity test chart were added. The following dates were fixed: latest date by which t

15、he EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The tex

16、t of the International Standard IEC 61966-7-1:2006 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61966-2-1 NOTE Harmonized as EN 61966-2-1:2000 (not modified). _ E

17、N 61966-7-1:2006 2 INTERNATIONAL STANDARD IEC61966-7-1Second edition2006-05Multimedia systems and equipment Colour measurement and management Part 7-1: Colour printers Reflective prints RGB inputs Reference number IEC 61966-7-1:2006(E) EN 61966-7-1:2006CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative r

18、eferences .7 3 Terms and definitions .7 4 Letters and symbols .9 5 Conditions 9 5.1 Environmental conditions 9 5.2 Sampling conditions 10 5.3 Measurement conditions11 5.4 Method of calculation 12 6 Spectral characteristics 14 6.1 Attributes to be measured .14 6.2 Method of measurement14 6.3 Presenta

19、tion of the result 14 7 Basic colorimetric characteristics15 7.1 Attribute to be measured .15 7.2 Method of measurement15 7.3 Presentation of the results.15 8 Tone reproduction characteristics.16 8.1 Attribute to be measured .16 8.2 Method of measurement16 8.3 Presentation of the results.17 9 Spatia

20、l non-uniformity characteristics .18 9.1 Attribute to be measured .18 9.2 Method of measurement18 9.3 Presentation of the result 18 10 Temporal instability characteristics.19 10.1 Short-term instability .19 10.2 Long-term instability20 11 Dependency on illuminant characteristics .23 Annex A (normati

21、ve) Values in the colour test-chart file .26 Annex B (normative) Specification of the measurement positions in the spatial non-uniformity test-chart file and the reporting form .32 Annex C (normative) Specification for the measurement of short-term instability characteristics 37 Annex D (informative

22、) Estimation of effect for backing material change .38 Annex E (informative) Layout of the colour test-chart file reproduced as a reflective print 39 Annex F (informative) Layout of the spatial non-uniformity test-chart file reproduced as a reflective print .40 Annex G (informative) Layout of the sh

23、ort-term instability test-chart file reproduced as a reflective print 41 Bibliography42 EN 61966-7-1:2006 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications 43 Figure 1 Spectral reflectance of the primary and secondary saturated c

24、olours, and white, grey and black 15 Figure 2 Example plots for gamut of colours in the CIE 1976 *baL colour space16 Figure 3 An example of reporting tone reproduction characteristics17 Table 1 Reference to Table A.1 .14 Table 2 Reference to Table A.3 .17 Table 3 Conditions for sampling and measurem

25、ents 19 Table 4 Specification of data in the colour test chart file and the form for reporting the result in the long-term instability measurement .22 Table 5 Specification of colour patches23 Table 6 Specification of data in the colour test chart file and the form of reporting the result of depende

26、ncy on illuminants measurement .24 Table 7 Specification of data in the colour test chart file and the form of reporting the result of dependency on illuminants measurement .25 Table A.1 Specification of the colour test chart file and the form for reporting Primary colours.26 Table A.2 Specification

27、 of the colour test-chart file and the form for reporting 6-by-6-by-6 cubic data 26 Table A.3 Specification of the colour test-chart file and the form for reporting Data and form for gradation 30 Table B.1 Form of reporting with measurement positions .32 Table C.1 Short-term instability characterist

28、ics 37 EN 61966-7-1:2006 5 INTRODUCTION This part of IEC 61966 is applicable to characterization of colour printers that produce colour on opaque substrate corresponding to digital data files in which colour image information is expressed in a redgreenblue colour space. The characterization will be

29、realized by objective measurements to be utilized for colour management in open systems. The measured and reported results are used to relate the equipment-dependent and undefined red greenblue colour space to the default RGB colour space defined as the sRGB by IEC 61966-2-1. This standard is also a

30、pplicable to assessment of colour image attributes on reflective prints reproduced from colour digital image files. The recommended usage of the standard is for evaluation of the output of home and office RGB printers. EN 61966-7-1:2006 6 MULTIMEDIA SYSTEMS AND EQUIPMENT COLOUR MEASUREMENT AND MANAG

31、EMENT Part 7-1: Colour printers Reflective prints RGB inputs 1 Scope This part of IEC 61966 specifies a set of data in colour test chart files for measurements, sampling of successive prints, measurement conditions and forms of reporting the results so as to make possible the characterization of the

32、 colour printer and comparison of the results of measurements. The sets of data for measurements are in colour test chart files expressed in a redgreenblue colour space, to which corresponding colour images are reproduced on reflective substrate. The methods of measurement in this standard are desig

33、ned to be applicable to reflective colour prints for consumer use. The reflective colour prints may be produced by non-impact colour printers, incorporating such technologies as ink-jet, sublimation transfer, thermal transfer, electro-photography and other similar technologies. This standard does no

34、t specify limiting values for various attributes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including a

35、ny amendments) applies. IEC 60050(845):1987, International Electrotechnical Vocabulary (IEV) Chapter 845: Lighting ISO 216:1975, Writing paper and certain classes of printed matter Trimmed sizes A and B series ISO/CIE 10526:1999, CIE standard illuminants for colorimetry ISO/CIE 10527:1991, CIE stand

36、ard colorimetric observers CIE 15, Colorimetry 3 Terms and definitions For the purposes of this document, terms and definitions which relate to lighting in IEC 60050(845), as well as the following, apply. 3.1 colour printer system composed of an application programme to handle colour digital image f

37、iles, a driver for equipment that produces colour images on a substrate, and the equipment itself which accepts equipment specific data for each input channel and is able to process by such technologies as ink jet, sublimation transfer, thermal transfer, or electro-photography and other similar tech

38、nologies NOTE The colour printer includes a system whereby the equipment that reproduces prints is connected direct to another piece of equipment in which a set of colour digital image data is contained. EN 61966-7-1:2006 7 3.2 driver software code which converts output data from an application prog

39、ramme to feed a series of digital signals to the equipment which produces reflective prints 3.3 application programme any software which has access to the colour digital image file and output colour image information to the driver, and possibly renders the colour image on displays 3.4 consumable any

40、 material necessary to run colour printers; for example, sheets of paper, toners, ink, fuser oil, etc. 3.5 half-tone screen set of rules for two-dimensional pixel layouts to render a tone 3.6 image visible two-dimensional representation of electronic signals intended to form a picture 3.7 substrate

41、opaque substance providing support for a medium 3.8 reflective print colour image reproduced on a piece of substrate 3.9 gamut of colours three-dimensional maximum range of reproducible colours expressed in the CIE 1976 *baL colour space defined in CIE15 3.10 primary colours colours used to define a

42、 colour space incorporated in the colour digital image file NOTE Red, green and blue are the primary colours for this standard. 3.11 secondary colours colours to be defined by a mixture of two primary colours except black NOTE Cyan, magenta and yellow are the secondary colours for this standard. 3.1

43、2 saturated colours primary colours and secondary colours intended to be reproduced corresponding to their maximum excitation of electronic signals NOTE Saturation means the maximum excitation purity (chromaticity) limited by each specific system. 3.13 reproduced colours colorimetric information mea

44、sured from the reflective print, expressed in the CIE 1976 colour space defined in CIE 15 EN 61966-7-1:2006 8 3.14 tone reproduction relationship between data in the colour digital image file which are intended to reproduce the images of primary, secondary and achromatic colours and the CIE 1976 lig

45、htness values of reflective prints actually reproduced 3.15 characterization process of obtaining the spectral characteristics, basic colorimetric characteristics, tone reproduction characteristics, spatial non-uniformity characteristics, temporal instability characteristics or dependency on illumin

46、ant characteristics. In general, these characteristics relate the input RGB signal to some measured CIE colour values 3.16 electronic signal data prepared as a colour digital image file intended to form a picture 4 Letters and symbols The letters and symbols consistently adopted in this part of IEC

47、61966 are summarized below. sN Number of samples of reflective prints for measurements uN Metric in colour difference *abE for spatial non-uniformity within a page tN Metric in colour difference *abE for short-term instability among successive reflective prints p Printing speed of the colour printer

48、 )(S Spectral power distribution of the illuminant D50 as default, D65, F11 and illuminant A optional )( Spectral reflectance of a printed image RD , GD , BD Digital data in integers fed to colour printers R , G , B Data normalized by 12N , where N is the number of bits per channel *L , *a , *b Colo

49、ur in CIE 1976 UCS in reference to printed colour white (see also equation (4) NOTE Special attention should be given to the illuminant and illumination used. Future work is hoped for in this area for consumer situations. 5 Conditions 5.1 Environmental conditions Sampling and measurements shall be carried out within the environmental conditions specified by the manufacturer of the equipment that produces reflective p