BS EN 61753-381-2-2016 Fibre optic interconnecting devices and passive components Performance standard Cyclic arrayed waveguide grating Category C (controlled environment)《光纤互连器件和无.pdf

《BS EN 61753-381-2-2016 Fibre optic interconnecting devices and passive components Performance standard Cyclic arrayed waveguide grating Category C (controlled environment)《光纤互连器件和无.pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-381-2-2016 Fibre optic interconnecting devices and passive components Performance standard Cyclic arrayed waveguide grating Category C (controlled environment)《光纤互连器件和无.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 381-2: Cyclic arrayed waveguide grating Category C (controlled environment)BS EN 61753-381-2:2016National forewordThis British Standard is the UK implementation of EN 61753-381-2:2016.It is i

2、dentical to IEC 61753-381-2:2016.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this committee can be obtained onrequest to it

3、s secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83422 6ICS 33.180.20Compliance with a British Standard c

4、annot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753-381-2:20166EUROPEAN STANDARD NORME EUROPENNE

5、 EUROPISCHE NORM EN 61753-381-2 April 2016 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) (IEC 61753-381-2:2016) Dispositifs dinterconnexion et compos

6、ants passifs fibres optiques - Norme de performance - Partie 381-2: Rseau slectif planaire cyclique - Catgorie C (environnement contrl) (IEC 61753-381-2:2016) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 381-2: Zyklisches Array-Wellenleitergitter fr die Kat

7、egorie C - Kontrollierte Umgebung (IEC 61753-381-2:2016) This European Standard was approved by CENELEC on 2016-02-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with

8、out any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any ot

9、her language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyp

10、rus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t

11、he United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any

12、means reserved worldwide for CENELEC Members. Ref. No. EN 61753-381-2:2016 E BS EN 61753-381-2:20166EN 61753-381-2:2016 2 European foreword The text of document 86B/3954/FDIS, future edition 1 of IEC 61753-381-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/

13、TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-381-2:2016. The following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2016-11-0

14、9 latest date by which the national standards conflicting withthe document have to be withdrawn(dow) 2019-02-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any o

15、r all such patent rights. Endorsement notice The text of the International Standard IEC 61753-381-2:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 NOT

16、E Harmonized in EN 61300 series. IEC 61753-081-2 NOTE Harmonized as EN 61753-081-2. IEC 61753-1 NOTE Harmonized as EN 61753-1. BS EN 61753-381-2:20166EN 61753-381-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The follo

17、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an I

18、nternational Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61300-2-1 -

19、 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/c

20、able retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedure

21、s - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic

22、test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22

23、- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - BS EN 61753-381-2:20166EN 61753-381-2:2016 4 Publication Year Title EN/HD Year IEC 61300-2-42 - Fibre optic interconnecting devices and pass

24、ive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibr

25、e optic devices EN 61300-2-44 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-6 - Fibre optic int

26、erconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and

27、 measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices EN 61300-3-2

28、9 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components EN 61300-3-32 - IEC 61300-3-38 - Fibre optic interconnecting de

29、vices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple EN 61300-3-38 - IEC 61753-021-2 - Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/

30、3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 - BS EN 61753-381-2:20166EN 61753-381-2:2016 5 Publication Year Title EN/HD Year IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specificat

31、ion EN 62074-1 - ITU-T Recommendation G.692 - Optical interfaces for multichannel systems with optical amplifiers - - ITU-T Recommendation G.694.1 - Spectral grids for WDM applications: DWDM frequency grid - - ITU-T Recommendation G.698.3 - Multichannel seeded DWDM applications with single-channel o

32、ptical interfaces - - BS EN 61753-381-2:20166 2 IEC 61753-381-2:2016 IEC 2016 CONTENTS FOREWORD . 31 Scope 52 Normative references 53 Terms and definitions 64 Test conditions 75 Test report . 76 Reference components 87 Performance requirements. 87.1 Dimensions . 87.2 Test details and requirements .

33、8Annex A (normative) Sample size 14Annex B (informative) General information on cyclic AWGs . 15Annex C (informative) Channel frequency range and free spectral range . 17Annex D (informative) Summary of differences between IEC 61753-081-2 and IEC 61753-381-2 18Bibliography 19Figure 1 Illustration of

34、 cyclic AWGs 7Figure B.1 Single bidirectional transmission with cyclic AWGs . 15Figure B.2 Reference diagram of ITU-T G.698.3 16Figure C.1 Description of channel frequency range and free spectral range . 17Table 1 Tests and requirements of optical performance parameters . 9Table 2 Environmental test

35、s any IEC National Committee interestedin the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closelywith the International Organization for Standa

36、rdization (ISO) in accordance with conditions determined byagreement between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationalconsensus of opinion on the relevant subjects since each technical committee has repres

37、entation from allinterested IEC National Committees.3) IEC Publications have the form of recommendations for international use and are accepted by IEC NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is accurate, IEC cann

38、ot be held responsible for the way in which they are used or for anymisinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications.

39、Any divergencebetween any IEC Publication and the corresponding national or regional publication shall be clearly indicated inthe latter.5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformityassessment services and, in some areas, access to

40、IEC marks of conformity. IEC is not responsible for anyservices carried out by independent certification bodies.6) All users should ensure that they have the latest edition of this publication.7) No liability shall attach to IEC or its directors, employees, servants or agents including individual ex

41、perts andmembers of its technical committees and IEC National Committees for any personal injury, property damage orother damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication, use of, or reliance upon, this IEC Pu

42、blication or any other IECPublications.8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications isindispensable for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Public

43、ation may be the subject ofpatent rights. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 61753-381-2 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre opt

44、ics. The text of this standard is based on the following documents: FDIS Report on voting 86B/3954/FDIS 86B/3969/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance wit

45、h the ISO/IEC Directives, Part 2. BS EN 61753-381-2:20166 4 IEC 61753-381-2:2016 IEC 2016 A list of all parts in the IEC 61753 series, published under the general title Fibre optic interconnecting devices and passive components Performance standard, can be found on the IEC website. Future standards

46、in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website und

47、er “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended.BS EN 61753-381-2:20166IEC 61753-381-2:2016 IEC 2016 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFOR

48、MANCE STANDARD Part 381-2: Cyclic arrayed waveguide grating Category C (controlled environment) 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a Gaussian-passband-profile cyclic arrayed waveguide grating (AWG) for single-mode and bi

49、directional transmission systems satisfies in order to be categorised as meeting the requirements of IEC 61753-1 for category C (controlled environment). This standard pertains to wavelength division multiplexing (WDM) network with multiple spectral-band usage. This standard covers the requirements of cyclic AWG devices with free spectral range (FSR) characteristics to ensure multiple spectral bands transmission performance, with single-mode non-connectorised pigtails and no electric circuit board. 2 Normative refere