BS EN 61753-121-2-2010 Fibre optic interconnecting ndevices and passive ncomponents Performance nstandards nPart 121-2 Simplex and duplex cords with nsinglemode fibre and cylindri.pdf

《BS EN 61753-121-2-2010 Fibre optic interconnecting ndevices and passive ncomponents Performance nstandards nPart 121-2 Simplex and duplex cords with nsinglemode fibre and cylindri.pdf》由会员分享，可在线阅读，更多相关《BS EN 61753-121-2-2010 Fibre optic interconnecting ndevices and passive ncomponents Performance nstandards nPart 121-2 Simplex and duplex cords with nsinglemode fibre and cylindri.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 61753-121-2:2010Fibre optic interconnectingdevices and passivecomponents PerformancestandardsPart 121-2: Simplex and duplex cords withsinglemode fibre and cylindrical ferru

2、leconnectors for category C ControlledenvironmentBS EN 61753-121-2:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN61753-121-2:2010. It is identical to IEC 61753-121-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/2,

3、 Fibre optic interconnecting devices and passivecomponents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 20

4、10ISBN 978 0 580 62101 7ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2010.Amendments issued since publicationDate Text affectedBS EN 6175

5、3-121-2:2010EUROPEAN STANDARD EN 61753-121-2 NORME EUROPENNE EUROPISCHE NORM July 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brusse

6、ls 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-121-2:2010 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Performance standards - Part 121-2: Simplex and duplex cords wit

7、h singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment (IEC 61753-121-2:2010) Dispositifs dinterconnexion et composantspassifs fibres optiques - Norme de qualit de fonctionnement - Partie 121-2: Cordons simplex et duplex avec fibres unimodales, munis de connect

8、eurs frule cylindrique pour catgorie C - Environnement contrl (CEI 61753-121-2:2010) Lichtwellenleiter -Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 121-2: Simplex- und Duplexkabel mit Einmoden-Lichtwellenleiter-Steckverbindern mit zylindrischen Ferrulen fr die Kategorie C - K

9、ontrollierte Umgebung (IEC 61753-121-2:2010) This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

10、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

11、ranslation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark

12、, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61753-121-2:2010EN 61753-121-2:2010 - 2 - Foreword The

13、 text of document 86B/2988/FDIS, future edition 1 of IEC 61753-121-2, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-121-2 on 2010-07-01. Attention is d

14、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by

15、publication of an identical national standard or by endorsement (dop) 2011-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-121-2:2

16、010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60794-2 NOTE Harmonized as EN 60794-2. IEC 61756-1 NOTE Harmonized as EN 61756-1. _ BS EN 61753-121-2:2010- 3

17、- EN 61753-121-2:2010 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re

18、ferences, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50:

19、 Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 - IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor cables - Family speci

20、fication for simplex and duplex cables for use in terminated cable assemblies EN 60794-2-50 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61300-1 - Fibre optic interconnecting devices and passive components -

21、 Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-5 - Fibre optic interconnecting d

22、evices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-

23、42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - BS EN 61753-121-2:2010EN 61753-121-2:2010 - 4 - Publication Year Title EN/HD Year IEC 61300-2-44 - Fibre optic interconnecting

24、devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-3-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations

25、and measurements - Visual examination EN 61300-3-1 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-6

26、 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-15 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15

27、: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface EN 61300-3-15 - IEC 61300-3-16 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically poli

28、shed ferrulesEN 61300-3-16 - IEC 61300-3-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules EN 61300-3-17 - IEC 61300-3-22 - Fibre optic interconnecting devices

29、and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force EN 61300-3-22 - IEC 61300-3-23 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measu

30、rements - Fibre position relative to ferrule endface EN 61300-3-23 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - BS EN 61753-121-2:2010- 5 - EN 61753-12

31、1-2:2010 Publication Year Title EN/HD Year IEC 61300-3-34 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 61300-3-34 - IEC 61300-3-35 - Fibre optic interconnect

32、ing devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic cylindrical connector endface visual and automated inspection EN 61300-3-35 - IEC 61753 Series Fibre optic interconnecting devices and passive components performance st

33、andard EN 61753 Series IEC 61753-1 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 - IEC 61753-021-2 - Fibre optic interconnecting devices and passive components performance standard - Part 021-2: G

34、rade C/3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 - IEC 61754 Series Fibre optic connector interfaces EN 61754 Series IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series IEC 61755-2-1 - Fibre optic connector optical interfaces -

35、Part 2-1: Optical interface standard single mode non-angled physically contacting fibres EN 61755-2-1 - IEC 61755-2-2 - Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode 8 degrees angled physically contacting fibres EN 61755-2-2 - IEC/TR 61931 - Fibre optic

36、- Terminology - - BS EN 61753-121-2:2010 2 61753-121-2 IEC:2010(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Terms and definitions .8 4 Description .9 4.1 General .9 4.2 Optical fibres.9 4.3 Cable design and construction.9 4.4 Optical connectors 9 4.4.1 Mechanical connectivity.9 4.4.

37、2 Optical performance requirements .9 4.4.3 Connector set performance requirements 9 4.5 Cable bend radius .9 4.6 Identification9 5 Tests 9 5.1 General .9 5.2 Measuring wavelengths .9 5.3 Test specimen.10 6 Test procedure .10 6.1 General .10 6.2 Visual examination 10 6.3 Fibre optic connector end fa

38、ce 10 6.4 Optical performance requirements.11 6.5 Climatic performance requirements .12 6.6 Mechanical performance requirements 13 7 Test report15 Annex A (normative) Sample size requirements .16 Annex B (normative) Visual examination of outer cable sheath movement .17 Annex C (normative) Change of

39、teperature 18 Annex D (normative) Static side load .19 Annex E (normative) Flexing strain relief of fibre optic devices 20 Bibliography21 Figure B.1 Initial marking of the cable sheath.17 Figure B.2 Final visual examination .17 Figure C.1 Change of temperature test configuration .18 Figure D.1 Test

40、apparatus for transmission with applied side load .19 Figure E.1 Flexing test apparatus 20 Table 1 Wavelengths for attenuation and return loss measurements 10 Table 2 Visual examination requirements.10 Table 3 End face requirements 10 Table 4 Optical performance requirements.11 Table 5 Climatic perf

41、ormance requirements .12 BS EN 61753-121-2:201061753-121-2 IEC:2010(E) 3 Table 6 Mechanical performance requirements 13 Table A.1 Sample size requirements16 BS EN 61753-121-2:2010 4 61753-121-2 IEC:2010(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE CO

42、MPONENTS PERFORMANCE STANDARD Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C Controlled environment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national e

43、lectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spec

44、ifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Interna

45、tional, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The forma

46、l decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for

47、 international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)

48、 In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall

49、 be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including in