BS EN 61105-1994 Specification for reference tapes for video tape recorder systems《磁带录像系统用基准磁带规范》.pdf

《BS EN 61105-1994 Specification for reference tapes for video tape recorder systems《磁带录像系统用基准磁带规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61105-1994 Specification for reference tapes for video tape recorder systems《磁带录像系统用基准磁带规范》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 61105:1994 IEC1105:1991 Specification for Reference tapes for video tape recorder systems The European Standard EN61105:1993 has the status of a BritishStandard UDC 621.397.452BSEN61105:1994 This BritishStandard, having been prepared under the directionof the Electronic Equipm

2、ent Standards Policy Committee, was published underthe authority of the Standards Board and comesintoeffect on 15January1994 BSI 01-2000 The following BSI references relate to the work on this standard: Committee referenceEEL/22 Draft for comment90/30303DC ISBN 0 580 22698 0 Cooperating organization

3、s The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: Austria Italy Belgium Luxembourg Denmark Netherlands Finland Norway France Portugal Germany Spain Greece

4、 Sweden Iceland Switzerland Ireland United Kingdom Amendments issued since publication Amd. No. Date CommentsBSEN61105:1994 BSI 01-2000 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Definitions 3 4 Source and mainten

5、ance of reference tapes 3 5 Electromagnetic parameters 4 6 Alignment 4 7 Determination of the tape 4 Annex A (normative) Reference tape data 5 Annex B (informative) Delivery addresses 6 Annex ZA (normative) Other international publications quoted in thisstandardwith the references of the relevant Eu

6、ropean publications 7 National annex NA (informative) Committees responsible Inside back cover National annex NB (informative) Cross-references Inside back cover Table 1 VTR systems and reference tapes 4BSEN61105:1994 ii BSI 01-2000 National foreword This BritishStandard has been prepared under the

7、direction of the Electronic Equipment Standards Policy Committee and is the English language version of EN61105:1993 Reference tapes for video tape recorder systems, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1105:1991, published by th

8、e International Electrotechnical Commission (IEC). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obl

9、igations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amen

10、dment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61105 October1993 UDC 621.397.452 Descriptors: Video recording, recording apparatus, video recorder, magnetic tape, characteristics, format, compatibility English version Reference tapes for video tape recorde

11、r systems (IEC 1105:1991) Bandes de rfrence pour les systmes de magntoscope (CEI1105:1991) Referenzleerbnder fr Videoaufzeichnungssysteme (IEC1105:1991) This European Standard was approved by CENELEC on 1993-09-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which s

12、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Sta

13、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the nati

14、onal electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland andUnited Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalis

15、ation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1993 Copyright reserved to CENELEC members Ref. No. EN 61105:1993EEN61105:1993 BSI 01-2000 2 Foreword The CENELEC questionnaire procedure, performed for finding out whethe

16、r or not the International Standard IEC1105:1991 could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as European Standard. The reference document was submitted to theCENELEC members for formal vote and wasapproved by CENELEC as EN61105

17、on22September1993. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given only for information. In this standard, Annex A andAnnex ZA are normative andAnnex B is informative. latest date of publication ofan iden

18、tical national standard (dop)1994-09-01 latest date of withdrawal ofconflicting national standards (dow)1994-09-01EN61105:1993 BSI 01-2000 3 1 Scope This International Standard describes the general requirements for reference tapes applicable to various video tape recorder (VTR) formats. The object

19、of this standard is to enable users of magnetic recording systems to compare technical product data from different manufacturers and to enable compatibility within the VTR format. Currently available VTRs, adjusted with the IEC reference tape appropriate to the corresponding IEC VTR standard, should

20、 give satisfactory results with currently available tapes. The information within this standard covers existing IEC formats. For future formats the corresponding information will be included in the IEC standard which defines the individual system. 2 Normative references The following standards conta

21、in provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigat

22、e the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC558:1982, Type C helical video tape recorders. IEC602:1980, Type B helical video recorders. IEC698:1981, Measuring methods

23、 for television tape machines. IEC735:1991, Measuring methods for video tape properties. IEC767:1983, Helical-scan video tape cassette system using12,65mm(0,5in) magnetic tape on type betaformat. IEC774:1983, Helical-scan video tape cassette system using12,65mm(0,5in) magnetic tape on type VHS. IEC8

24、43:1987, Helical-scan video tape cassette system using8mm magnetic tape Video8. IEC1016:1989, Helical-scan digital component video cassette recording system using19mm magnetic tape(format D-1). 3 Definitions For the purpose of this International Standard, the following definition applies: reference

25、tape an unrecorded magnetic tape with specified audio and video characteristics, selected as a reference, to enable a comparison to be made with other magnetic tapes or to measure characteristics of magnetic tape recorders IEV806-05-59 modified 4 Source and maintenance of reference tapes Reference t

26、apes shall be provided by agreed organizations which have carefully selected a batch of tapes of the VTR formats listed inTable 1. Reference tapes shall be periodically reviewed to ensure that they are compatible with currently available video tapes and video tape recorders. The reference tapes shal

27、l be certified by the issuing IEC National Committee and agreed to by the IEC. The reference tape for a particular VTR system shall be valid for all television standards covered by the corresponding VTR standard.EN61105:1993 4 BSI 01-2000 The IEC reference tapes are listed inTable 1 below. Table 1 V

28、TR systems and reference tapes 5 Electromagnetic parameters The IEC reference tape is used as the0dB reference for the following electromagnetic compatibility parameters. The data for the IEC reference tapes is given inAnnex A. 5.1 Video: Optimum recording current. 5.2 Audio: a) optimum bias; b) low

29、-frequency sensitivity; c) high-frequency sensitivity. 5.3 The above parameters are the basis for comparison of video, tapes and video tape recorders measured in accordance with IEC698 and IEC735. 5.4 Tolerances of reference tapes should be specified by the manufacturer and controlled accordingly. 6

30、 Alignment In order to assure matching of mass produced video tape recorders and video tapes, alignment of video tape recorders shall be such that compatibility with the relevant IEC reference tape is obtained. 7 Determination of the tape It is the task of the National Committee which presents each

31、IEC VTR standard to determine and incorporate the appropriate information concerning the calibration and reference tape applicable to theVTR standard. VTR system IEC standard Country of issue Identification and supplier Broadcast VTR systems Type B 602 Germany R861 Type C 558 USA 196-1630EPR2 Type M

32、 a Japan VRT-24 Type D-1 1016 Japan RSA-60D13 Non-broadcast VTR systems Type Beta 767 Japan RSK-40033 Type VHS 774 Japan VRT-24 Type8mm(MP) 843 Japan RSE-50013 The reference tapes listed in the table are available from the manufacturers listed inAnnex B in accordance with the figure given in square

33、brackets. Reference tapes not listed in this table can be found in the corresponding IEC standard. a M format is not an IEC standard. This line is given for information only. The reference tape is identical with that for VHS.EN 61105:1993 BSI 01-2000 5 Annex A (normative) Reference tape data Specifi

34、cations Electromagnetic properties Model identification IEC publications RF recording current at frequency RF playback output at frequency Audio bias current Audio sensitivity at frequency Audio frequency response at frequency Tape length Equivalent to Delivery (address inAnnex B) IEC B-format Refer

35、ence tapeR86 602 0 0,3dB 7,4MHz 0 0,3dB 7,4MHz 0 0,2dB 0 0,2dB 1kHz 0 0,2dB 10kHz/1kHz 330m 22min BASF IEC C-format Reference tape196-1630EPR 558 0 1,0dB 8,3MHz 0 1,0dB 8,3MHz 0 1,0dB 0 1,0dB 1kHz 0 1,0dB 15kHz/1kHz 495 30m 203mm spool AMPEX IEC D-1-format Reference tape RSA-60D1 1016 0 0,5dB 40MHz

36、0 1,0dB 40MHz 0 0,5dB 0 0,5dB 1kHz 0 1,0dB 10kHz/1kHz (Mcassette) SONY 0 0,3dB 0 0,3dB IEC Beta format Reference tape RSK-4003 767 4,3MHz525/60 4,7MHz625/50 0 0,3dB 0 0,3dB 315Hz 0 0,3dB 5kHz/315Hz L-125 SONY 0 0,2dB 0 0,2dB IEC VHS-format Reference tape VTR-2 774 4,0MHz525/60 4,5MHz625/50 0 0,2dB 0

37、 0,2dB 1kHz 0 0,2dB 7kHz/1kHz Same as T-60 JVC IEC8mm-format (MP) Reference tape RSE-5001 843 0 0,3dB 5,0MHz 0 0,3dB 5,0MHz luminance 0 0,3dB 0,75MHz, chrominance Frequency response 0 0,3dB 5MHz/2MHz Not applicable to this standard 28m P6-30 Tape thickness 134m (nominal) SONY Other specifications sh

38、all comply with appropriate standards 225 +2 0 m 42 +2 0 mEN61105:1993 6 BSI 01-2000 Annex B (informative) Delivery addresses 1 BASF Magnetics GmbH Professional Audio/VideoM/B Dynamostr.3 D-6800 Mannheim1 Germany Fax:+496216044299 2 AMPEX Recording Media Corporation Mall Stop22-03 400Broadway Redwoo

39、d City, CA94063 USA Fax:+14153672551 ou/or AMPEX Recording Media International Acre Road Reading Berks. RG2OQR United Kingdom Fax:+44734869889 3 SONY Corporation Magnetic Products Group Major Customer Sales Division 6-7-35 Kitashinagawa Shinagawa, Tokyo141 Japan Tel.:+8134483126 Fax:+8134474378 Tlx:

40、SonycorpJ22262 JVC Victor Company of Japan Ltd. Video Research and Development Labs. 3-12, Moriya-cho, Kanagawa-ku Yokohama, 221 Japan Tel.:+81454531111 Fax:+81454536140 Tlx:J47753JVCYHAEN61105:1993 BSI 01-2000 7 Annex ZA (normative) Other international publications quoted in this standard with the

41、references of the relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subseque

42、nt amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. NOTEWhen the international publication has been modified by CENELEC comm

43、on modifications, indicated by (mod), the relevantEN/HD applies. IEC publication Date Title EN/HD Date 558 1982 Type C helical video tape recorders HD573S1 a 1990 602 1980 Type B helical video recorders HD574S1 a 1990 698 1981 Measuring methods for television tape machines HD439S1 1983 735 1991 Meas

44、uring methods for video tape properties EN60735 1991 767 1983 Helical-scan video tape cassette system using12,65mm(0,5in) magnetic tape on typebetaformat HD461S1 1987 774 1983 Helical-scan video tape cassette system using12,65mm0,5in) magnetic tape on typeVHS HD463S1 1987 843 1987 Helical-scan video

45、 tape cassette system using8mm magnetic tape Video8 HD531S1 1989 1016 1989 Helical-scan digital component video cassette recording system using19mm magnetic tape(format D-1) a HD573S1 includes A1:1987 to IEC558. HD574S1 includesA1:1987 to IEC602.8 blankBSEN61105:1994 BSI 01-2000 National annex NA (i

46、nformative) Committees responsible The United Kingdom participation in the preparation of this European Standard was entrusted by the Electronic Equipment Standards Policy Committee (EEL/-) to Technical Committee EEL/22 upon which the following bodies were represented: Association of Professional Re

47、cording Services Ltd. Audio Engineering Society British Broadcasting Corporation British Kinematograph, Sound and Television Society British Tape Industry Association Independent Television Association National Council for Educational Technology (NCET) Royal Photographic Society Royal Television Soc

48、iety National annex NB (informative) Cross-references Publication referred to Corresponding BritishStandard IEC1016:1989 BS7360:1990 Specification for helical-scan digital component video cassette recording system using19mm magnetic tape (format D-1) HD439S1:1983 BS6311:1982 Methods for measuring te

49、levision tape machine parameters HD461S1:1987 BS6502:1984 Specification for helical-scan video tape cassette system using12.65mm(0.5in) magnetic tape on type Beta format HD463S1:1987 BS6482:1984 Specification for helical-scan video tape cassette system using12.65mm(0.5in) magnetic tape on type VHS HD531S1:1989 BS7065:1989 Specification for helical-scan video tape cassette system using8mm magnetic tape: Video8 HD573S1:1990 BS6758:1987 Specification for type C helical