BS EN 60793-2-30-2015 Optical fibres Product specifications Sectional specification for category A3 multimode fibres《光纤 产品规格 A3类多模纤维用分规格》.pdf

《BS EN 60793-2-30-2015 Optical fibres Product specifications Sectional specification for category A3 multimode fibres《光纤 产品规格 A3类多模纤维用分规格》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60793-2-30-2015 Optical fibres Product specifications Sectional specification for category A3 multimode fibres《光纤 产品规格 A3类多模纤维用分规格》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationOptical fibresPart 2-30: Product specifications Sectional specification for category A3 multimode fibresBS EN 60793-2-30:2015National forewordThis British Standard is the UK implementation of EN 60793-2-30:2015. It isidentical to IEC 60793-2-30:2015. It supersedes BS EN 6079

2、3-2-30:2013which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibresand cables.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does no

3、t purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 85613 6ICS 33.180.10Compliance with a British Standard cannot confer immunity fromlegal obli

4、gations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60793-2-30:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-2-30 Octob

5、er 2015 ICS 33.180.10 Supersedes EN 60793-2-30:2013 English Version Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2015) Fibres optiques - Partie 2-30: Spcifications de produits - Spcification intermdiaire pour les fibres

6、 multimodales de catgorie A3 (IEC 60793-2-30:2015) Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation fr Mehrmodenfasern der Kategorie A3 (IEC 60793-2-30:2015) This European Standard was approved by CENELEC on 2015-07-30. CENELEC members are bound to comply with the CEN/CENE

7、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre o

8、r to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

9、 the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux

10、embourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung

11、CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60793-2-30:2015 E BS EN 60793-2-30:2015EN 60793-2-30:2015 2 European foreword The text of document 86A/1661/FDIS,

12、future edition 4 of IEC 60793-2-30, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60793-2-30:2015. The following dates are fixed: latest date by which the document has to be implemented at national leve

13、l by publication of an identical national standard or by endorsement (dop) 2016-04-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-30 This document supersedes EN 60793-2-30:2013. Attention is drawn to the possibility that some of the el

14、ements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60793-2-30:2015 was approved by CENELEC as a European Standard without any modifi

15、cation. BS EN 60793-2-30:2015EN 60793-2-30:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application

16、. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2

17、 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-1-20 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 - IEC 60793-1-21 - Op

18、tical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry EN 60793-1-21 - IEC 60793-1-22 - Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement EN 60793-1-22 - IEC 60793-1-30 - Optical fibres - Part 1-30: Measurement methods and test pro

19、cedures - Fibre proof test EN 60793-1-30 - IEC 60793-1-31 - Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength EN 60793-1-31 - IEC 60793-1-40 - Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - IEC 60793-1-41 - Optic

20、al fibres - Part 1-41: Measurement methods and test procedures - Bandwidth EN 60793-1-41 - IEC 60793-1-43 - Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement EN 60793-1-43 - IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitori

21、ng of changes in optical transmittance EN 60793-1-46 - IEC 60793-1-50 - Optical fibres -Part 1-50: Measurement methods - Damp heat (steady state) tests EN 60793-1-50 - IEC 60793-1-51 - Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests EN 60793-1-51 -

22、 IEC 60793-1-52 - Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests EN 60793-1-52 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC/TR 62048 2014 Optical fibres - Reliability - Power law theory - - BS EN 60793-2

23、-30:2015 2 IEC 60793-2-30:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references. 6 3 Specifications 7 3.1 General . 7 3.2 Dimensional requirements . 7 3.3 Mechanical requirements . 8 3.4 Transmission requirements 8 3.5 Environmental requirements 9 Annex A (normative) Specifications fo

24、r sub-category A3a multimode fibres . 10 A.1 General . 10 A.2 Dimensional requirements . 10 A.3 Mechanical requirements . 10 A.4 Transmission requirements 10 A.5 Environmental requirements 11 Annex B (normative) Specifications for sub-category A3b multimode fibres . 12 B.1 General . 12 B.2 Dimension

25、al requirements . 12 B.3 Mechanical requirements . 12 B.4 Transmission requirements 12 B.5 Environmental requirements 13 Annex C (normative) Specifications for sub-category A3c multimode fibres . 14 C.1 General . 14 C.2 Dimensional requirements . 14 C.3 Mechanical requirements . 14 C.4 Transmission

26、requirements 14 C.5 Environmental requirements 15 Annex D (normative) Specifications for sub-category A3d multimode fibres . 17 D.1 General . 17 D.2 Dimensional requirements . 17 D.3 Mechanical requirements . 17 D.4 Transmission requirements 17 D.5 Environmental requirements 18 Annex E (normative) S

27、pecifications for sub-category A3e multimode fibres . 20 E.1 General . 20 E.2 Dimensional requirements . 20 E.3 Mechanical requirements . 20 E.4 Transmission requirements 20 E.5 Environmental requirements 21 Annex F (normative) Specifications for sub-category A3f multimode fibres 23 F.1 General . 23

28、 F.2 Dimensional requirements . 23 F.3 Mechanical requirements . 23 F.4 Transmission requirements 23 F.5 Environmental requirements 24 Annex G (normative) Specifications for sub-category A3g multimode fibres . 26 BS EN 60793-2-30:2015IEC 60793-2-30:2015 IEC 2015 3 G.1 General . 26 G.2 Dimensional re

29、quirements . 26 G.3 Mechanical requirements . 26 G.4 Transmission requirements 26 G.5 Environmental requirements 27 Table 1 Relevant dimensional attributes and measurement methods . 7 Table 2 Dimensional requirements common to all category A3 fibres . 8 Table 3 Additional dimensional attributes requ

30、ired for each sub-category 8 Table 4 Relevant mechanical attributes and test methods . 8 Table 5 Mechanical requirements to be specified for each sub-category 8 Table 6 Relevant transmission attributes and measurement methods 9 Table 7 Additional transmission attributes required for each sub-categor

31、y . 9 Table 8 Relevant environmental attributes and test methods . 9 Table A.1 Dimensional requirements specific to A3a fibres . 10 Table A.2 Mechanical requirements specific to A3a fibres . 10 Table A.3 Transmission requirements specific to A3a fibres 11 Table B.1 Dimensional requirements specific

32、to A3b fibres . 12 Table B.2 Mechanical requirements specific to A3b fibres . 12 Table B.3 Transmission requirements specific to A3b fibres . 13 Table C.1 Dimensional requirements specific to A3c fibres . 14 Table C.2 Mechanical requirements specific to A3c fibres . 14 Table C.3 Transmission require

33、ments specific to A3c fibres . 15 Table C.4 Environmental exposure tests . 15 Table C.5 Attributes measured . 16 Table D.1 Dimensional requirements specific to A3d fibres . 17 Table D.2 Mechanical requirements specific to A3d fibres . 17 Table D.3 Transmission requirements specific to A3d fibres 18

34、Table D.4 Environmental exposure tests . 18 Table D.5 Attributes measured . 19 Table E.1 Dimensional requirements specific to A3e fibres . 20 Table E.2 Mechanical requirements specific to A3e fibres . 20 Table E.3 Transmission requirements specific to A3e fibres 21 Table E.4 Environmental exposure t

35、ests . 21 Table E.5 Attributes measured . 22 Table F.1 Dimensional requirements specific to A3f fibres 23 Table F.2 Mechanical requirements specific to A3f fibres 23 Table F.3 Transmission requirements specific to A3f fibres . 24 Table F.4 Environmental exposure tests . 24 Table F.5 Attributes measu

36、red . 25 Table G.1 Dimensional requirements specific to A3g fibres . 26 Table G.2 Mechanical requirements specific to A3g fibres . 26 Table G.3 Transmission requirements specific to A3g fibres 27 Table G.4 Environmental exposure tests 27 Table G.5 Attributes measured . 28 BS EN 60793-2-30:2015 4 IEC

37、 60793-2-30:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 2-30: Product specifications Sectional specification for category A3 multimode fibres FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising a

38、ll national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, T

39、echnical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory

40、work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

41、 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recomm

42、endations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any

43、 end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publ

44、ication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by indepe

45、ndent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any p

46、ersonal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative

47、references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible

48、 for identifying any or all such patent rights. International Standard IEC 60793-2-30 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This fourth edition cancels and replaces the third edition published in 2012 and constitutes a technical revisi

49、on. This edition includes the following significant technical changes with respect to the previous edition: specified test specimen length and measurement details for core diameter and NAffmeasurements have been added. two new sub-categories have been added NAthis replaced by NAffBS EN 60793-2-30:2015IEC 60793-2-30:2015 IEC 2015 5 The text of this standard is based on the following documents: FDIS Report on