BS EN 60670-23-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23 Particular requirements for floor boxes and e.pdf

《BS EN 60670-23-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23 Particular requirements for floor boxes and e.pdf》由会员分享，可在线阅读，更多相关《BS EN 60670-23-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23 Particular requirements for floor boxes and e.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Boxes and enclosures for electrical accessories for household and similar fixedelectrical installations Part 23:

2、Particular requirements for floor boxes and enclosuresBS EN 60670-23:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60670-23:2008. It wasderived by CENELEC from IEC 60670-23:

3、2006.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. PQ).The UK participation in its preparation was entrusted to Technical CommitteePEL/23, Electrical accessories.A list of organizations represented on this committee can b

4、e obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009 ISBN 978 0 580 63515 1 ICS 29.120.10Compliance with a British Standard cannot confer immunity from legal obligatio

5、ns.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60670-23:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60670-23 NORME EUROPENNE EUROPISCHE NORM December 2008 CENELEC European Committe

6、e for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC mem

7、bers. Ref. No. EN 60670-23:2008 E ICS 29.120.10 English version Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures (IEC 60670-23:2006, modified) Botes et enveloppes pour appareilla

8、ge lectrique pour installations lectriques fixes pour usages domestiques et analogues - Partie 23: Rgles particulires pour les botes et enveloppes de sol (CEI 60670-23:2006, modifie) Dosen und Gehuse fr elektrische Installationsgerte fr Haushalt und hnliche ortsfeste elektrische Installationen - Tei

9、l 23: Besondere Anforderungen fr Unterflurdosen (IEC 60670-23:2006, modifiziert) This European Standard was approved by CENELEC on 2008-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

10、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A ver

11、sion in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus,

12、the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60670-23:2008Licensed Copy:

13、 Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSIEN 60670-23:2008 - 2 - Foreword The text of the International Standard IEC 60670-23:2006, prepared by SC 23B, Plugs, socket-outlets and switches, of IEC TC 23, Electrical accessories, together with the common modifi

14、cations prepared by the Technical Committee CENELEC TC 23BX, d.c. plugs and socket outlets and switches for household and similar fixed electrical installations, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60670-23 on 2008-11-01. EN 60670-23:2008, which specifi

15、es particular requirements for floor boxes, is to be used in conjunction with EN 60670-1:2005. EN 60670-23:2008 supplements or modifies the corresponding clauses of EN 60670-1. Where a particular clause or subclause of Part 1 is not mentioned in this Part 23, that clause or subclause applies as far

16、as is reasonable. Where this Part 23 states “add”, “replace” or “delete”, the relevant text of Part 1 is to be adapted accordingly. Subclauses, figures, tables or notes which are additional to those in Part 1 are numbered starting from 101. In this standard, the following print types are used: - req

17、uirements proper: in roman type; - test specifications: in italic type; - notes: in smaller roman type. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-11-01 latest date

18、by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-11-01 Annex ZB has been added by CENELEC. _ BS EN 60670-23:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSIEN 60670-23:2008 Annex ZB (normative) Special nati

19、onal conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard. For the countries in which the relevant

20、special national conditions apply these provisions are normative, for other countries they are informative. Clause Special national condition 13.3.101 Denmark Change the last paragraph in Subclause 13.3.101 to: The floor enclosure shall be mounted as instructed to a level surface of impermeable mate

21、rial with the lid(s), if any, closed and with plugs and connectors connected as in normal use. The mounting surface shall extend 50 mm in each direction from the perimeter of the floor box cover at its interface with the mounting surface. _ BS EN 60670-23:200- 3 - 8Licensed Copy: Wang Bin, ISO/EXCHA

22、NGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSICONTENTS FOREWORD.5 1 Scope.7 2 Normative references .7 3 Definitions 7 4 General requirements.7 5 General notes on tests .8 6 Ratings.8 7 Classification.8 8 Marking 89 Dimensions 810 Protection against electric shock 9 11 Provision fo

23、r earthing .9 12 Construction.9 13 Resistance to ageing, protection against ingress of solid objects and against harmful ingress of water .9 14 Insulation resistance and electric strength 10 15 Mechanical strength .10 16 Resistance to heat11 17 Creepage distances, clearances and distances through se

24、aling compound 11 18 Resistance of insulating material to abnormal heat and fire 11 19 Resistance to tracking 11 20 Resistance to corrosion 11 21 Electromagnetic compatibility (EMC) 11 IEC:2006 60670-23 4 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c)

25、 BSIINTERNATIONAL ELECTROTECHNICAL COMMISSION _ BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS Part 23: Particular requirements for floor boxes and enclosures FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide orga

26、nization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,

27、 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt

28、with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by

29、 agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3)

30、 IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are

31、 used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and th

32、e corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they hav

33、e the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatso

34、ever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicat

35、ions is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standa

36、rd IEC 60670-23 has been prepared by subcommittee 23B: Plugs, socket-outlets and switches, of IEC technical committee 23: Electrical accessories. The text of this standard is based on the following documents: FDIS Report on voting 23B/814/FDIS 23B/820/RVD Full information on the voting for the appro

37、val of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 5 IEC:2006 60670-23Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSIThis part

38、 of IEC 60670 shall be used in conjunction with IEC 60670-1 (2002). It lists the changes necessary to convert that standard into a specific standard for floor boxes and enclosures. In this publication, the following print types are used: requirements proper: in roman type. test specifications: in it

39、alic type. notes: in smaller roman type. Subclauses, figures, tables or notes which are additional to those in Part 1 are numbered starting from 101. The IEC 60670 series comprises the following parts, under the general title Boxes and enclosures for electrical accessories for household and similar

40、fixed electrical installations: Part 1: General requirements Part 21: Particular requirements for boxes and enclosures with provision for suspension means Part 22: Particular requirements for connecting boxes and enclosures Part 23: Particular requirements for floor boxes and enclosures Part 24: Par

41、ticular requirements for enclosures for housing protective devices and similar power consuming devices The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data relat

42、ed to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 6 IEC:200660670-23Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSIBOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIE

43、S FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS Part 23: Particular requirements for floor boxes and enclosures 1 Scope This clause of Part 1 is applicable except as follows: Addition after the fourth paragraph: This standard applies to boxes and floor enclosures.The flush floor boxes and

44、 flush floor enclosures are intended to be intended to protect accessories against load up to and including 1 000 N. NOTE Outdoor requirements are under consideration. 2 Normative references This clause of Part 1 is applicable. 3 Definitions This clause of Part 1 is applicable with the following add

45、itions: 3.106 finished floor (for indoor application) floor which carries the load and which is completed with or without a floor covering material such as carpet, tile, vinyl or wood 3.107 dry treatment of floor process for cleaning and/or care by which the floor is treated without liquids or with

46、only a small quantity of liquid. The required agents are applied and spread in such quantities that no pools are formed, and soaking of the floor covering does not occur NOTE Examples for dry treatment are: Sweeping with a broom or carpet-sweeper, vacuum cleaning, brushing, cleaning with a dry clean

47、ing powder, dry shampoo treatment, wet shampooing of carpets, treatment with cleaning litter (liquid chemical cleaning agent on a solid material used as carrier, e.g. soaked sawdust, damp cloth, etc.). 3.108 wet treatment of floor process for cleaning and/or care by which the floor is treated with l

48、iquid agents such that pools of liquid, or soaking of the floor covering for a brief period of time, cannot be excluded NOTE Examples of wet treatment are: wet scrubbing, manual or mechanical wiping. 4 General requirements This clause of Part 1 is applicable. PQ 7 IEC:2006 60670-23Licensed Copy: Wan

49、g Bin, ISO/EXCHANGE CHINA STANDARDS, 18/11/2009 03:07, Uncontrolled Copy, (c) BSI5 General notes on tests This clause of Part 1 is applicable. 6 Ratings This clause of Part 1 is not applicable. 7 Classification This clause of Part 1 is applicable except as follows: 7.2 Addition: 7.2.101.1 Floor boxes or enclosures intended to be installed in floor subjected to dry treatment 7.2.101.2 Floor boxes or enclosures intended to be installed in floor subjected to wet treatment 7.2 The metho