BS EN 60264-2-1-1992 Packaging for winding wires - Cylindrical barrelled delivery spools - Basic dimensions《绕组线的封装 圆桶形输出线轴 基本尺寸》.pdf
《BS EN 60264-2-1-1992 Packaging for winding wires - Cylindrical barrelled delivery spools - Basic dimensions《绕组线的封装 圆桶形输出线轴 基本尺寸》.pdf》由会员分享,可在线阅读,更多相关《BS EN 60264-2-1-1992 Packaging for winding wires - Cylindrical barrelled delivery spools - Basic dimensions《绕组线的封装 圆桶形输出线轴 基本尺寸》.pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD BS EN 60264-2-1:1996 IEC 264-2-1: 1989 Incorporating Amendment No. 1 BS 7584-2.1:1992 renumbered and Amendment No. 2 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 2.1 Basic dimensions The European Standard EN 60264-2-1:1994, incorporating amendment
2、 A1:2003, has the status of a British Standard ICS 29.060.10 BS EN 60264-2-1:1996 This British Standard, having been prepared under the direction of the Cables and Insulation Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1992
3、BSI 26 November 2003 The following BSI references relate to the work on this British Standard: Committee reference CIL/55 Draft announced in BSI News May 1992 ISBN 0 580 21023 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Cables and
4、Insulation Standards Policy Committee (CIL/-) to Technical Committee CIL/55, upon which the following bodies were represented: British Cable Makers Confederation British Non-ferrous Metals Federation British Railways Board Covered Conductors Association EEA (the Association of Electronics, Telecommu
5、nications and Business Equipment Industries) Electrical and Electronic Insulation Association Electronic Components Industry Federation Transmission and Distribution Association (BEAMA Ltd.) Amendments issued since publication Amd. No. Date Comments 9048 May 1996 14833 26 November 2003 Replacement o
6、f Table 1 and Figure 1BS EN 60264-2-1:1996 BSI 26 November 2003 i Contents Page Committees responsible Inside front cover National foreword ii 1S c o p e 3 2O b j e c t 3 3D i m e n s i o n s 3 4M a t e r i a l 3 Annex ZA (normative) Other international publications quoted in this standard with the
7、references of the relevant European publications 5 Figure 1 Cylindrical barrelled delivery spools 4 Table 1 Dimensions and tolerances for cylindrical barrelled delivery spools 3 BS EN 60264-2-1:1996 ii BSI 26 November 2003 National foreword This British Standard has been prepared by Technical Commit
8、tee GEL/55 (formerly CIL/55) and is the English language version of EN 60264-2-1:1994 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 1: Basic dimensions, including amendment A1:2003, published by the European Committee for Electrotechnical Standardization (CENELEC).
9、 It is identical with IEC 264-2-1:1989, including amendment 1:2003, published by the International Electrotechnical Commission (IEC). BS EN 60264, of which there are four Parts, deals with the packaging of winding wires. Part 1 covers containers, Part 2 covers cylindrical barrelled delivery spools,
10、Part 3 covers taper barrelled delivery spools and Part 4 covers methods of test. This British Standard is one of a series dealing with insulated wires used for windings in electrical equipment, which comprises the following three groups. IEC 851, Methods of test for winding wires; IEC 317, Specifica
11、tions for particular types of winding wires; IEC 264, Packaging of wires. NOTE BS 6811 Winding wires Part 0:1993 General introduction and list of Parts lists the various Sections of BS 6811 and BS 7584 against the corresponding Parts of the IEC standards listed above. Some or all of these IEC standa
12、rds will be adopted as BS ENs in due course and the relevant Parts of BS 6811 and BS 7584 will be renumbered as BS ENs. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does
13、not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROP
14、EAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60264-2-1 December 1994 + A1 October 2003 ICS 29.060.10 English version P a c k a g i n g o f w i n d i n g w i r e s P a r t 2 : C y l i n d r i c a l b a r r e l l e d d e l i v e r y s p o o l s Section 1: Basic dimensions (includes amendment A1:200
15、3) (IEC 60264-2-1:1989/A1:2003) Conditionnement des fils de bobinage Partie 2: Bobines de livraison ft de forme cylindrique S e c t i o n 1 : D i m e n s i o n s d e b a s e (inclut lamendement A1:2003) (CEI 60264-2-1:1989) Verpackung von Wickeldrhten Teil 2: Lieferspulen mit zylindrischem Kern Haup
16、tabschnitt 1: Mae (enthlt nderung A1:2003) (IEC 60264-2-1:1989) This European Standard was approved by CENELEC on 1994-09-01. Amendment A1 was approved by CENELEC on 2003-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving th
17、is European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versio
18、ns (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of A
19、ustria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Eu
20、ropen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 2003 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref. No. EN 60264-2-1:1994 + A1:2003 EEN 60264
21、-2-1:1994 BSI 26 November 2003 2 Foreword The text of the International Standard IEC 264-2-1:1989, prepared by IEC TC 55, Winding wires, was approved by CENELEC as HD 46.2.1 S1 on 1990-05-01. This Harmonization Document was submitted to the formal vote for conversion into a European Standard and was
22、 approved by CENELEC as EN 60264-2-1 on 1994-09-01. The following date was fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Foreword to amendment A1 The text of document 55/830/FDIS, future amendm
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN60264211992PACKAGINGFORWINDINGWIRESCYLINDRICALBARRELLEDDELIVERYSPOOLSBASICDIMENSIONS 绕组 封装 圆桶 输出

链接地址:http://www.mydoc123.com/p-575431.html