BS EN 50377-4-4-2011 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Type SC-PC simplex terminated on IEC 60793-h.pdf

《BS EN 50377-4-4-2011 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Type SC-PC simplex terminated on IEC 60793-h.pdf》由会员分享，可在线阅读，更多相关《BS EN 50377-4-4-2011 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Type SC-PC simplex terminated on IEC 60793-h.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50377-4-4:2011Connector sets and interconnect components to be used in optical fibre communication systems Product specificationsPart 4-4: Type SC-PC simplex terminated on

2、IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category UBS EN 50377-4-4:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN50377-4-4:2011.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/2,

3、Fibre optic interconnecting devices and passivecomponents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 201

4、1ISBN 978 0 580 55047 8ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate Text affectedBS EN 50377-

5、4-4:2011EUROPEAN STANDARD EN 50377-4-4 NORME EUROPENNE EUROPISCHE NORM March 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 20

6、11 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-4-4:2011 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Ty

7、pe SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produits - Partie 4-4: Type simplex SC-PC c

8、bl sur une fibre unimodale des catgories B1.1 et B1.3 de la CEI 60793-2-50, avec frule en zircone, catgorie U Steckverbinderstze und Verbindungsbauelemente fr Lichtwellenleiter-Datenbertragungssysteme - Produktnormen - Teil 4-4: Bauart SC-PC-Simplex zum Anschluss an Einmodenfasern der Kategorie B1.1

9、 und B1.3 nach IEC 60793-2-50 mit Zirkonium-Ferrule fr die Kategorie U This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national

10、 standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in an

11、y other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, t

12、he Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50377-4-4:2011EN 50377-4-4:2

13、011 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50377-4-4 on 2011-01-02. Attention is drawn to the

14、possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication

15、of an identical national standard or by endorsement (dop) 2012-01-02 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-01-02 _ BS EN 50377-4-4:2011 3 EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communicati

16、on systems Product specifications Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre,with full zirconia ferrule category U Description Performance Coupling mechanism: Push-pull Application: For use in EN category U (Uncontrolled environment) Configurati

17、on: Plug/adaptor/plug Attenuation grade: (random mate) B: 0,12 dB mean 0,25 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements Fibre category: EN 60793-2-50, Types B1.1 and B1.3 Cable type: see Table 3 Return loss grades: (random mate) 2: 45 dB Related documents: EN 60794-2

18、, Optical fibre cables Part 2: Indoor cables Sectional specification (IEC 60794-2) EN 61300 series, Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 61753-1, Fibre optic interconnecting devices and passive components performance s

19、tandard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-4, Fibre optic connector interfaces Part 4: Type SC connector family (IEC 61754-4) EN 61755-1, Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres Gener

20、al and guidance (IEC 61755-1) EN 61755-3-1, Fibre optic connector optical interfaces Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre (IEC 61755-3-1) ETSI TS 100 671, Transmission and Multiplexing (TM); Passive optical components; Optic

21、al fibre connectors for single mode optical fibre communication systems; Common requirements and conformance testing Outline and maximum dimensions: 68 REF. 79 REF.60 MAX.58 MAX.BS EN 50377-4-4:2011EN 50377-4-4:2011 4 Contents Foreword . 2 1 Scope . 61.1 Product definition . 61.2 Intermateability 61

22、.3 Operating environment . 61.4 Reliability . 61.5 Quality assurance 62 Normative references 73 Description 83.1 General 83.2 Plug . 83.3 Adaptor 83.4 Materials 83.5 Dimensions 83.6 Colour and marking 84 Variants 94.1 Terminated plug . 94.2 Adaptor 95 Dimensional requirements . 105.1 Outline dimensi

23、ons . 105.2 Mating face and other limit dimensions . 126 Tests. 216.1 Sample size . 216.2 Test and measurement methods 216.3 Test sequence . 216.4 Pass/fail criteria . 217 Test report 218 Performance requirements 218.1 Dimensional and marking requirements 218.2 Optical performance requirements 228.3

24、 Mechanical performance requirements . 238.4 Environmental performance requirements . 28Annex A (informative) Attenuation against reference . 30Annex B (normative) Adaptor matched reference plug details 31Annex C (normative) Sample size and product sourcing requirements . 32Annex D (informative) Zir

25、conia ferrule response surface . 33Bibliography . 34BS EN 50377-4-4:2011 5 EN 50377-4-4:2011 Figures Figure 1 Outline dimensions Plug . 10Figure 2 Outline dimensions Adaptor and panel cut out 11Figure 3 Plug mating face and other limit dimensions 12Figure 4 Adaptor mating face and other limit dimens

26、ions . 14Figure 5 Ferrule endface geometry after termination . 16Figure 6 Positioning of fibre core . 17Figure 7 Ferrule end face geometry Allowable undercut 18Figure 8 Requirements for the attenuation grades for the plug fibre core connected to the ideal reference . 19Figure 9 Pin gauge for adaptor

27、 20Figure D.1 Radius vs. undercut and apex offset 33Tables Table 1 Ensured level of random attenuation . 6Table 2 Preferred colour scheme 8Table 3 Plug variants 9Table 4 Adaptor variants . 9Table 5 Optical interface parameter values for PC ferrules 16Table 6 Geometrical parameters . 17Table 7 Optica

28、l performance requirements 22Table 8 Mechanical performance requirements . 23Table 9 Environmental performance requirements . 28Table A.1 . 30Table A.2 Reference connector details 30Table B.1 . 31Table C.1 32BS EN 50377-4-4:2011EN 50377-4-4:2011 6 1 Scope 1.1 Product definition This European Standar

29、d contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a connector terminated with cylindrical zirconia PC ferrule and assembled singlemode resilient alignment sleeve SC-PC simplex connector set (plug/adaptor/plug), adaptor and patchco

30、rd must meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.6. 1.2 Intermateability Although all products conforming to the requirements of this European Standard will intermate, th

31、e resulting level of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuat

32、ion cannot be assured to be any better than the worst attenuation grade. The intermating of a Grade C plug with a Grade B plug will result in an uncertain level of random attenuation performance. Table 1 Ensured level of random attenuation Plug attenuation grade C B C C C B C B A simplex plug can be

33、 connected in a duplex adaptor without degrading its level of performance. 1.3 Operating environment The tests selected combined with the severities and durations are representative of a category U environment described in EN 61753-1. 1.4 Reliability Whilst the anticipated service life expectancy of

34、 the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this specification does not guarantee the manufactur

35、ing consistency of the product. This should be maintained using a recognised quality assurance programme. BS EN 50377-4-4:2011 7 EN 50377-4-4:2011 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition

36、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC 60793-2-50) EN 61300 (series) Fibre optic interconnectin

37、g devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 61300-2-1 Part 2-1: Tests Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-2 Part 2-2: Tests Mating durability (IEC 61300-2-2) EN 61300-2-4 Part 2-4: Tests Fibre/cable retention (IEC 61300-2-4) EN 61300-2-5

38、 Part 2-5: Tests Torsion/twist (IEC 61300-2-5) EN 61300-2-6 Part 2-6: Tests Tensile strength of coupling mechanism (IEC 61300-2-6) EN 61300-2-7 Part 2-7: Tests Bending moment (IEC 61300-2-7) EN 61300-2-12 Part 2-12: Tests Impact (IEC 61300-2-12) EN 61300-2-17 Part 2-17: Tests Cold (IEC 61300-2-17) E

39、N 61300-2-18 Part 2-18: Tests Dry heat High temperature endurance (IEC 61300-2-18) EN 61300-2-22 Part 2-22: Tests Change of temperature (IEC 61300-2-22) EN 61300-2-26 Part 2-26: Tests Salt mist (IEC 61300-2-26) EN 61300-2-27 Part 2-27: Tests Dust Laminar flow (IEC 61300-2-27) EN 61300-2-42 Part 2-42

40、: Tests Static side load for connectors (IEC 61300-2-42) EN 61300-2-44 Part 2-44: Tests Flexing of the strain relief of fibre optic devices (IEC 61300-2-44) EN 61300-2-46 Part 2-46: Tests Damp heat cyclic (IEC 61300-2-46) EN 61300-3-6 Part 3-6: Examinations and measurements Return loss (IEC 61300-3-

41、6) EN 61300-3-10 Part 3-10: Examinations and measurements Gauge retention force (IEC 61300-3-10) EN 61300-3-15 Part 3-15: Examinations and measurements Dome eccentricity of a convex polished ferrule endface (IEC 61300-3-15) EN 61300-3-16 Part 3-16: Examinations and measurements Endface radius of sph

42、erically polished ferrules (IEC 61300-3-16) EN 61300-3-23 Part 3-23: Examination and measurements Fibre position relative to ferrule endface (IEC 61300-3-23) EN 61300-3-28 Part 3-28: Examinations and measurements Transient loss (IEC 61300-3-28) EN 61300-3-34 Part 3-34: Examinations and measurements

43、- Attenuation of random mated connectors (IEC 61300-3-34) EN 61300-3-42 Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves (IEC 61300-3-42) EN 61753-1 Fibre optic interconnecting devices and passive components perf

44、ormance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-4 Fibre optic connector interfaces Part 4: Type SC connector family (IEC 61754-4) ISO 8015 Technical drawings Fundamental tolerancing principle BS EN 50377-4-4:2011EN 50377-4-4:2011 8 3 Description 3.1 Gen

45、eral The SC-PC connector is a single position plug connector set of plug / adaptor / plug configuration characterised by a cylindrical, spring loaded butting ferrules of 2,5 mm nominal diameter and a push-pull coupling mechanism. The optical alignment mechanism of the connector is of a resilient sle

46、eve style. 3.2 Plug The plug features a cylindrical zirconia ceramic ferrule and a push-pull coupling mechanisms. The plug housing has a single male key, which is used to limit the relative rotation between mated plugs. A cover (dust cap) to protect the ferrule end face when the connector is in the

47、unmated condition shall be provided. 3.3 Adaptor The adaptor has a zirconia ceramic resilient alignment sleeve. The mounting style is a rectangular flange simplex. Covers (dust caps) are provided to protect each port of the adaptor. 3.4 Materials Materials which are not specified or which are not sp

48、ecifically described are left to the discretion of the manufacturer. 3.5 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with an EN Interface Standard this is clearly stated. 3.6 Colour and marking Marking of the product shall be in the following order of precedence: identification of manufacturer; manu