BS EN 50130-4-2011 Alarm systems Electromagnetic compatibility Product family standard Immunity requirements for components of fire intruder hold up CCTV access control and social .pdf

《BS EN 50130-4-2011 Alarm systems Electromagnetic compatibility Product family standard Immunity requirements for components of fire intruder hold up CCTV access control and social .pdf》由会员分享，可在线阅读，更多相关《BS EN 50130-4-2011 Alarm systems Electromagnetic compatibility Product family standard Immunity requirements for components of fire intruder hold up CCTV access control and social .pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50130-4:2011Alarm systems -Part 4: Electromagnetic compatibility Product family standard: Immunityrequirements for components of fire,intruder, hold up, CCTV, access contro

2、l andsocial alarm systemsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50130-4:2011.It supersedes BS EN 50130-4:1996 which is withdrawn.The UK

3、 participation in its preparation was entrusted to TechnicalCommittee GW/1/1, Alarm components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsibl

4、e for its correctapplication. BSI 2011ISBN 978 0 580 71130 5ICS 13.220.20; 13.310; 13.320; 33.100.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2011.

5、Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011EUROPEAN STANDARD EN 50130-4 NORME EUROPENNE EUROPISCHE NORM June 2011 CENELEC European Committee for Electrotechnical Standardiza

6、tion Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50130-4:2011 E ICS 1

7、3.320; 29.020 Supersedes EN 50130-4:1995 + A1:1998 + A2:2003 + corr. Mar.2003English version Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems Systmes dalarme

8、 - Partie 4: Compatibilit lectromagntique - Norme de famille de produits: Exigences relatives limmunit des composants des systmes dalarme de dtection dincendie, contre lintrusion, contre les hold-up, CCTV, de contrle daccs et dalarme sociale Alarmanlagen - Teil 4: Elektromagnetische Vertrglichkeit -

9、 Produktfamiliennorm: Anforderungen an die Strfestigkeit von Anlageteilen fr Brandmeldeanlagen, Einbruch- und berfallmeldeanlagen, Video-berwachungsanlagen, Zutrittskontrollanlagen sowie Personen-Hilferufanlagen This European Standard was approved by CENELEC on 2011-06-13. CENELEC members are bound

10、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Cent

11、ral Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same st

12、atus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,

13、 Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011EN 50130-4:2011 2 Foreword This European Standard was prepared by the Techni

14、cal Committee CENELEC TC 79, Alarm systems, in cooperation with CEN Technical Committee TC 72, Fire detection and fire alarm systems. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50130-4 on 2011-06-13. This document supersedes EN 50130-4:1995 + A1:1998 + A

15、2:2003 + corrigendum March 2003. The main changes with respect to EN 50130-4:1995 are listed below: 1) referenced based standards were updated to the latest versions; 2) significant changes were made to the test methods and/or requirements for Clauses 8, 9, 10, 11 and to a lesser degree Clause 13; 3

16、) the title was corrected to match the scope of the document. This revision was prepared to bring the procedures up to date with current technical developments, taking account of changes in the basic standards and the experience gained in the use of the standard. The following dates were fixed: late

17、st date by which the EN has to be implementedat national level by publication of an identical national standard or by endorsement (dop) 2012-06-13 latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2014-06-13 This European Standard is part of the EN 50130 s

18、eries of standards. This series is intended to give the requirements applicable to alarm systems in general (e.g. the EMC immunity requirements, in this case). The following associated series of European standards are intended to give the other requirements (e.g. performance requirements), which are

19、 applicable to the specific types of alarm systems: EN 50131 Alarm systems Intrusion and hold-up systems; EN 50132 Alarm systems CCTV surveillance systems for use in security applications; EN 50133 Alarm systems Access control systems for use in security applications; EN 50134 Alarm systems Social a

20、larm systems; EN 50136 Alarm systems Alarm transmission systems and equipment; CLC/TS 50398 Alarm systems Combined and integrated alarm systems General requirements; EN 54 Fire detection and fire alarm systems. This European Standard has been prepared under a mandate given to CENELEC by the European

21、 Commission and the European Free Trade Association and covers essential requirements of EC Directive 2004/108/EC. See Annex ZZ. _ Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011 3 EN 50130-4:2011 Contents 1 Scope . 52 Normative r

22、eferences . 63 Terms, definitions and abbreviations 63.1 Terms and definitions 63.2 Abbreviations 74 Application of the tests 85 Conditions during testing 85.1 Configuration . 85.2 Environmental conditions 85.3 Operating conditions . 86 Functional test 97 Mains supply voltage variations . 97.1 Objec

23、t of the test . 97.2 Principle 97.3 Test procedure 97.4 Criteria for compliance 108 Mains supply voltage dips and short interruptions 108.1 Object of the test .108.2 Principle 108.3 Test procedure 108.4 Criteria for compliance 119 Electrostatic discharge 119.1 Object of the test .119.2 Principle 119

24、.3 Test procedure 129.4 Criteria for compliance 1310 Radiated electromagnetic fields .1310.1 Object of the test .1310.2 Principle 1310.3 Test procedure 1310.4 Criteria for compliance 1511 Conducted disturbances induced by electromagnetic fields 1611.1 Object of the test .1611.2 Principle 1611.3 Test

25、 procedure 1611.4 Criteria for compliance 17Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011EN 50130-4:2011 4 12 Fast transient bursts 1812.1 Object of the test .1812.2 Principle 1812.3 Test procedures 1812.4 Criteria for complianc

26、e 1913 Slow high energy voltage surge .1913.1 Object of the test .1913.2 Principle 1913.3 Test procedures 2013.4 Criteria for compliance 2214 Conducted, common mode disturbances from 0 Hz to 150 kHz .22Annex ZZ (informative) Coverage of Essential Requirements of EC Directives 23Bibliography 24Figure

27、s Figure 1 Forms of the modulation types relative to the continuous wave 15Figure 2 Coupling method 1, if CDN is not applicable . 21Figure 3 Typical arrangement for coupling onto screened signal lines 21Tables Table 1 Mains supply voltage variations Conditioning 10Table 2 Mains supply voltage reduct

28、ions Conditioning . 11Table 3 Electrostatic discharge Conditioning . 12Table 4 Radiated electromagnetic fields Conditioning 14Table 5 Conducted disturbances induced by electromagnetic fields Conditioning . 17Table 6 Fast transient bursts Conditioning 19Table 7 Slow high energy voltage surge Conditio

29、ning 22Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011 5 EN 50130-4:2011 1 Scope This EMC product-family standard, for immunity requirements, applies to the components of the following alarm systems, intended for use in and around

30、 buildings in residential, commercial, light industrial and industrial environments: access control systems, for security applications; alarm transmission systems 1); CCTV systems, for security applications; fire detection and fire alarm systems; hold-up alarm systems; intruder alarm systems; social

31、 alarm systems; The tests and severities to be used are the same for indoor and outdoor applications of fixed, movable and portable equipment. The levels do not cover extreme cases, which may occur in any location, but with an extremely low probability of occurrence, or in special locations close to

32、 powerful emitters (e.g. radar transmitters). Equipment within the scope of this standard should be designed in order to operate satisfactorily in the environmental electromagnetic conditions of residential, commercial, light industrial and industrial environments. This implies particularly that it

33、should be able to operate correctly within the conditions fixed by the electromagnetic compatibility levels for the various disturbances on the low voltage public supply system as defined by EN 61000-2-2. The immunity tests in this standard only concern the most critical disturbance phenomena. For e

34、quipment using radio signalling, mains signalling or with connections to the public telephone system, additional requirements, from other standards specific to these signalling media, might apply. This standard does not specify basic safety requirements, such as protection against electrical shocks,

35、 unsafe operation, insulation coordination and related dielectric tests. This standard does not cover EMC emission requirements. These are covered by other appropriate standards. 1)Apart from equipment which is part of a public communication network. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAND

36、ARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011EN 50130-4:2011 6 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of

37、the referenced document (including any amendments) applies. EN 60068-1:1994 Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + Corr. Oct. 1988 + A1:1992) EN 61000-4-2:2009 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge imm

38、unity test (IEC 61000-4-2:2008) EN 61000-4-3:2006 + A1:2008 + A2:2010 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006 + A1:2007 + A2:2010) EN 61000-4-4:2004 + A1:2010 Electromagnetic c

39、ompatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test (IEC 61000-4-4:2004 + A1:2010) EN 61000-4-5:2006 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test (IEC 61000-4-5:2005) EN 61000-4-6:2009 E

40、lectromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6:2008) EN 61000-4-11:2004 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interrup

41、tions and voltage variations immunity tests (IEC 61000-4-11:2004) EN 61000-4-20:2010 Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques Emission and immunity testing in transverse electromagnetic (TEM) waveguides (IEC 61000-4-20:2010) ETSI EN 301 489 (series) Electroma

42、gnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 European product p

43、erformance standard European Standard (EN) that specifies the product performance requirements, which may include EMC requirements but is not limited to EMC requirements EXAMPLES EN 54 series for fire alarm systems, EN 50131 series for intruder alarm systems. 3.1.2 basic EMC standards standards givi

44、ng the description of, and test and measurement methods for an EMC phenomenon, along with details of the test apparatus and test set-up, which may give guidance on the choice of severity but do not give the prescribed limits or criteria for compliance Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAN

45、DARDS, 31/12/2011 01:57, Uncontrolled Copy, (c) BSIBS EN 50130-4:2011 7 EN 50130-4:2011 3.1.3 intruder alarm system alarm system to detect and indicate the presence, entry or attempted entry of an intruder into supervised premises 3.1.4 fire detection and fire alarm system alarm system to detect the

46、 presence of fire in supervised premises and to raise the appropriate alarm 3.1.5 hold-up alarm system alarm system providing the means fro a user to deliberately generate a hold-up alarm condition 3.1.6 social alarm system alarm system, providing facilities to summon assistance, for use by persons,

47、 who can be considered to be living at risk 3.1.7 response time amount of time required for the system to react to a stimulus such as an alarm or fault 3.1.8 indication annunciation of a condition in the alarm system by visual or audible means such as but not restricted to a LED or a buzzer 3.1.9 CC

48、TV system system consisting of camera equipment, storage, monitoring and associated equipment for transmission and controlling purposes which might be necessary for the surveillance of a defined secure area 3.1.10 access control system system comprising all the constructional and organizational measures as well as those pertaining to the apparatus which are required for controlling access 3.1.11 alarm transmission system Alarm Transmission Equipment and networks used to transfer information concerne