BS EN 166101-1999 Harmonized system of quality assessment for electronic components - Blank detail specification surface acoustic wave (SAW) filters - Capability approval《电子元器件质量评定.pdf

《BS EN 166101-1999 Harmonized system of quality assessment for electronic components - Blank detail specification surface acoustic wave (SAW) filters - Capability approval《电子元器件质量评定.pdf》由会员分享，可在线阅读，更多相关《BS EN 166101-1999 Harmonized system of quality assessment for electronic components - Blank detail specification surface acoustic wave (SAW) filters - Capability approval《电子元器件质量评定.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 166101:1999 Harmonized system of quality assessment for electronic components Blank Detail Specification: SurfaceAcoustic Wave (SAW) filters Capability approval The European Standard EN166101:1999 has the status of a BritishStandard ICS 31.160BSEN166101:1999 This BritishStanda

2、rd, having been prepared under the directionof the ElectrotechnicalSector Committee, was published underthe authority of the Standards Committee and comesinto effect on 15May1999 BSI 02-2000 ISBN 0 580 32205 X National foreword This BritishStandard is the English language version of EN166101:1999 pu

3、blished by the European Electronic Components Committee (CECC) of the European Committee for Electrotechnical Standardization (CENELEC). The UK participation in its preparation was entrusted to Technical Committee EPL/49, Piezoelectric devices for frequency control and selection, which has the respo

4、nsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A l

5、ist of organizations represented on this committee can be obtained on request to its secretary. Cross-references The BritishStandards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Internatio

6、nal Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Briti

7、sh Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to8 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorpora

8、ted. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN166101:1999 BSI 02-2000 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 166101 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

9、NORM EN 166101 February1999 ICS 31.160 English version Blank Detail Specification: Surface Acoustic Wave (SAW) filters Capability approval Spcification particulire cadre: Filtres Ondes Acoustiques de Surface (OAS) Agrment de savoir-faire Vordruck fr Bauartspezifikation: Oberflchenwellen (OFW-)Filter

10、 Befhigungsanerkennung This European Standard was approved by CENELEC on1999-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list

11、s and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re

12、sponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,

13、Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-

14、1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN166101:1999 EEN166101:1999 BSI 02-2000 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC49, Piezoelectric devices for frequency con

15、trol and selection. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN166101 on1999-01-01. The following dates were fixed: Contents Page Foreword 2 1 Ratings 5 2 Characteristics 5 3 Related documents 6 4 Marking 6 5 Ordering information 6 6 Certi

16、fied test records 6 7 Additional information 6 8 Inspection requirements 6 Annex A Example front page layout for customerDetail Specifications not for publication 8 Table 1 7 latest date by which the ENhas to be implemented at national level by publication of an identical national standard or by end

17、orsement (dop)2000-01-01 latest date by which the national standards conflicting with the EN haveto be withdrawn (dow)2000-01-01EN166101:1999 BSI 02-2000 3 Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for

18、 the minimum content of detail specifications. The front page layout shown on page5 is applicable to detail specifications for standard catalogue items only. For custom-built surface acoustic wave filters where the detail specification is not intended for publication, a suggested layout for the fron

19、t page is given in Annex A. This is not mandatory, but it is recommended that the layout should be followed whenever possible. Key for page5 The numbers between the brackets on page5 correspond to the following information which should be given in the appropriate boxes. (1) The name of the National

20、Standards Organization under whose authority the detail specification is published and, if applicable, the organization from whom the detail specification is available. (2) The EN symbol and the number allotted to the detail specification by the Secretariat. (3) The number and issue number of the EN

21、 generic or sectional specification as relevant; also national reference if different. (4) If different from the EN number, the national number of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers. (5) A brief des

22、cription of the surface acoustic wave filter or range of surface acoustic wave filters. (Forexample, centre frequency and type of filter). (6) Information on typical construction (where applicable). (For example resistance welded, cold welded). For(5) and(6) the text to be given in the detail specif

23、ication should be suitable for an entry in CECC00200 (QPL) and CECC00300 (Library List). (7) An outline drawing with main dimensions which are of importance for interchangeability and/or reference to the appropriate national or international document for outlines. Alternatively, this drawing may be

24、given in an annex to the detail specification.4 blankEN166101:1999 BSI 02-2000 5 1 Ratings (see2.4 of EN166000 for preferred ratings) Operating temperature range Climatic category Mechanical test severities 2 Characteristics (see2.3 of EN166000) Nominal frequency Reference temperature Frequency tole

25、rance (s) (if applicable) Passband and/or stopband attenuation Passband ripple Insertion attenuation Terminating impedances In addition other characteristics may be stated. NOTEInformation on the above characteristics may be given in tabular form if necessary. Specification available from: (1) EN166

26、101-XXX Page1 of. (2) ELECTRONIC COMPONENTS OF ASSESSED QUALITY BY CAPABILITY APPROVAL IN ACCORDANCEWITH: (3) (4) Outline and dimensions (first angle projection): (7) (5) ENCLOSURE (6) Dimensions inmm Information about manufacturers who have components qualified to this detail specification is avail

27、able in the current CECC00200.EN166101:1999 6 BSI 02-2000 3 Related documents 4 Marking The marking of the surface acoustic wave filter and the primary package shall be in accordance with the requirements of2.5 of EN166000. Full details shall be given in the detail specification. 5 Ordering informat

28、ion The following ordering information shall be specified: 1) Quantity 2) EN or customer detail specification number, issue number and date. 3) Nominal frequency expressed in MHz or GHz 4) Product code 5) Full description of any additional requirements. 6 Certified test records The detail specificat

29、ion shall state whether certified test records are required/not required in accordance with3.12 of EN166000. 7 Additional information (not for inspection purposes) The detail specification may include information (which is not normally required to be verified by the inspection procedure) such as cir

30、cuit diagrams, curves, drawings and notes for the clarification of the detail specification. 8 Inspection requirements Clause numbers of tests and performance requirements refer to EN166000 and are given in Table 1. In this table The manufacturer and their customers shall ensure that any quality asp

31、ects of the surface acoustic wave filter to be supplied that are not covered by the maintenance of the capability approval programme are included in the detail specification. This blank detail specification does not include any periodic tests as these are controlled by the CQC testing under the main

32、tenance of the capability approval as defined in3.11 and3.12 of EN166100. Generic specification EN166000 Sectional specification EN166100 D =destructive ND =non-destructiveEN166101:1999 BSI 02-2000 7 Table 1 Clause number and test D or ND Conditions of test Performance requirements 100% INSPECTION N

33、D 4.3.1 4.5.2 Visual test A Insertion attenuation characteristics Pass band Stop band Insertion attenuation Pass band ripple 4.3.1 min. or max. frequency (ies) according to filter type if applicable min. or max. frequency (ies) according to filter type if applicable at specified frequency (ies) acco

34、rding to filter type if applicable at specified frequency (ies) according to filter type if applicable 4.3.1 specified values specified values specified values specified values GROUP B INSPECTION To be conducted on a sampling basis Sub-Group B1 ND 4.4.1 Dimensions Test A 4.4.1 specified values Sub-G

35、roup B2 ND To be conducted on a sampling basis 4.6.2 Fine leak test 4.6.2 specified valuesEN166101:1999 8 BSI 02-2000 Annex A Example front page layout for customer Detail Specifications not for publication 1 Ratings (see2.4 of EN166000 for preferred ratings) Operating temperature range Climatic cat

36、egory Mechanical test severities Customer: Specification reference Issue Number Manufacturer: Date Page1 of. ELECTRONIC COMPONENTS OF ASSESSED QUALITY BY CAPABILITY APPROVAL IN ACCORDANCE WITH: (3) Manufacturers type number Outline and dimensions (first angle projection): (7) (5) ENCLOSURE (6) Dimen

37、sions inmmblankBS EN 166101:1999 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter

38、. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy o

39、r ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers

40、 automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the

41、 BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI elec

42、tronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of

43、standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted

44、under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of im

45、plementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.