BS EN 16313-2013 Connections for heating and cooling appliances Detachable connection with outside threaded pipe G 3 4 A and inside cone《加热和冷却设备连接 外螺纹管G 3 4 A和内椎体可拆卸连接》.pdf

《BS EN 16313-2013 Connections for heating and cooling appliances Detachable connection with outside threaded pipe G 3 4 A and inside cone《加热和冷却设备连接 外螺纹管G 3 4 A和内椎体可拆卸连接》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16313-2013 Connections for heating and cooling appliances Detachable connection with outside threaded pipe G 3 4 A and inside cone《加热和冷却设备连接 外螺纹管G 3 4 A和内椎体可拆卸连接》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16313:2013Connections for heatingand cooling appliances Detachable connection withoutside threaded pipe G Aand inside coneBS EN 16313:2013 BRITISH STANDARDNational foreword

2、This British Standard is the UK implementation of EN 16313:2013.The UK participation in its preparation was entrusted to TechnicalCommittee RHE/6, Air or space heaters or coolers withoutcombustion.A list of organizations represented on this committee can beobtained on request to its secretary.This p

3、ublication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 75580 4ICS 91.140.10Compliance with a British Standard cannot confer immuni

4、ty fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2013.Amendments issued since publicationDate Text affectedBS EN 16313:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16313 May 2013 ICS 91.140.10 Englis

5、h Version Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside coneRaccords pour appareils de chauffage et de refroidissement - Raccords dmontables filetage extrieur cylindrique G 3/4 A et cne intrieur Anschlsse fr Heiz- und Khlsysteme

6、- Lsbare Verbindung mit Rohrauengewinde G 3/4 A und Innenkonus This European Standard was approved by CEN on 11 April 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit

7、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other

8、 language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, D

9、enmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMIT

10、TEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16313:2013: EBS EN 16313:2013EN 16313:2

11、013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Dimensions and designs 5 4 Functions and requirements 6 Bibliography 7 BS EN 16313:2013EN 16313:2013 (E) 3 Foreword This document (EN 16313:2013) has been prepared by Technical Committee CEN/TC 130 “Space heating

12、 appliances without integral heat sources”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be with

13、drawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulation

14、s, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

15、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16313:2013EN 16313:2013 (E) 4 Introduction On the market, a series of geometries (outside threaded pipe G A with inside cone and

16、counter geometries), e.g. under the designation “eurocone”, is commonly used. These geometries, however, are compatible with each other only to a limited degree. Therefore, this European Standard is intended to achieve a unification of detachable connections with outside threaded pipe G A and inside

17、 cone. Significant known applications are: connection geometries of radiators with integrated valves; connection geometries of connection fittings and bypass connection fittings on radiators with integrated valves; connection geometries of ascension pipe valves for standard radiators; connection geo

18、metries of heating circuit distributors to underfloor heatings and radiator connection systems; interface between radiator nipple and thermostatic valve or lockshield valve. Detachable connections with the outside threaded pipe G A are normally made of metallic materials. Further variants are possib

19、le. So far, the designation “eurocone” has conveyed the impression that there is a standardised geometry. However, this is not the case, i.e. the screw in or thread lengths, the cone angles and diameters, as well as the diameter of the inner cylinder differ frequently. Furthermore, the following var

20、iants are commonly used: spherical or tapered cone; cones with and without inserted sealing material; sealing principles inside the cylindrical part of the geometry comprising O rings; O rings within the slope of the cone (O rings offered by different providers are designed for different press fits)

21、; and sealings without additional sealing material (metallic sealing). BS EN 16313:2013EN 16313:2013 (E) 5 1 Scope This European Standard applies to detachable connections with outside threaded pipe G A in accordance with EN ISO 228-1. These are used in the field of heating and cooling emission syst

22、ems at the following hydraulic connection points: connection between radiators or circuit distributors and the respective pipe. Another connection point, for radiators with integrated valve sets, is the screw connection to the connection fitting or to the screw connection itself. This European Stand

23、ard specifies the dimensions for the single and the double connection. 2 Normative references Not applicable. 3 Dimensions and designs Dimensions in millimetres Surface roughness in micrometres Key Ra = roughness Figure 1 Detachable connections with outside threaded pipe G A and thread undercut BS E

24、N 16313:2013EN 16313:2013 (E) 6 Dimensions in millimetres Surface roughness in micrometres Key Ra = roughness Figure 2 Detachable connections with outside threaded pipe G A and thread run out without undercut Dimensions in millimetres Figure 3 Detachable double connections according to Figure 1 or F

25、igure 2 4 Functions and requirements In the use case, the companion pieces and the connection geometries, as standardised in this document, have to ensure a permanent leak tight connection. BS EN 16313:2013EN 16313:2013 (E) 7 Bibliography 1 DIN 3842, Valves for heating installations, PN 10; dimensio

26、ns, materials, design 2 EN 215, Thermostatic radiator valves Requirements and test methods 3 EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1) 4 EN ISO 1101, Geometrical product specifications (GPS) Geometric

27、al tolerancing Tolerances of form, orientation, location and run-out (ISO 1101) 5 EN ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation (ISO 1302) 6 EN 22768-1, General tolerances Part 1: Tolerances for linear and angular dimensions wi

28、thout individual tolerance indications (ISO 2768-1) 7 EN 22768-2, General tolerances Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2) This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible fo

29、r preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards L

30、imited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the l

31、atest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can

32、 be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of Britis

33、h Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed

34、 to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide rang

35、e of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For deta

36、ils of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI web

37、site at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed s

38、uch information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior writte

39、n permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: