BS EN 16240-2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs walls and ceilings Requirements and test methods《屋顶、墙壁和天花板内外用光线传输平坦坚.pdf

《BS EN 16240-2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs walls and ceilings Requirements and test methods《屋顶、墙壁和天花板内外用光线传输平坦坚.pdf》由会员分享，可在线阅读，更多相关《BS EN 16240-2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs walls and ceilings Requirements and test methods《屋顶、墙壁和天花板内外用光线传输平坦坚.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16240:2013Light transmitting flat solidpolycarbonate (PC) sheetsfor internal and external usein roofs, walls and ceilings Requirements and testmethodsBS EN 16240:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16240:2013.The U

2、K participation in its preparation was entrusted to TechnicalCommittee B/542/8, Light transmitting plastics sheeting for roofingand cladding.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessary

3、provisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 73803 6ICS 83.140.10; 91.060.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standar

4、d was published under the authority of theStandards Policy and Strategy Committee on 31 December 2013.Amendments issued since publicationDate Text affectedBS EN 16240:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16240 December 2013 ICS 83.140.10; 91.060.10 English Version Light transmitt

5、ing flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods Plaques dclairement pleines planes en polycarbonate (PC) pour usage intrieur ou extrieur dans les toitures, bardages et plafonds - Exigences et mthodes dessai Lichtdurc

6、hlssige, flache Massivplatten aus Polycarbonat (PC) fr Innen- und Auenanwendungen an Dchern, Wnden und Decken - Anforderungen und Prfverfahren This European Standard was approved by CEN on 5 October 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c

7、onditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard ex

8、ists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national s

9、tandards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

10、 Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means res

11、erved worldwide for CEN national Members. Ref. No. EN 16240:2013 EBS EN 16240:2013EN 16240:2013 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions and symbols .7 3.1 Terms and definitions .7 3.2 Symbols 8 4 Requirements .9 4.1 Visual appearance .9

12、4.2 Dimensions and mass per unit area and their tolerances .9 4.3 Spectral characteristics . 10 4.4 Total solar energy transmittance 10 4.5 Impact resistance 11 4.6 Durability . 12 4.7 Deformation behaviour 14 4.8 Airborne sound insulation . 14 4.9 Thermal transmittance . 14 4.10 Water vapour permea

13、bility . 16 4.11 Water/air tightness 16 4.12 Linear thermal expansion 16 4.13 Reaction to fire 16 4.14 External fire performance 16 4.15 Resistance to fire 16 4.16 Net heat of combustion 17 4.17 Presence of functional layers 17 4.18 Release of dangerous substances 17 4.19 Resistance to fixings 17 4.

14、20 Temporary protective coverings . 17 5 Test and calculation methods . 17 5.1 Dimensional tolerances and mass per unit area . 17 5.2 Artificial ageing . 20 5.3 Yellowness index 21 5.4 Small hard body impact resistance 21 5.5 Deformation behaviour 22 5.6 Airborne sound insulation . 23 5.7 Reaction t

15、o fire 23 6 Assessment and verification of constancy of performance AVCP 27 6.1 General . 27 6.2 Product type determination . 27 6.3 Factory production control (FPC) . 28 6.4 Initial inspection of factory and of FPC 30 6.5 Continuous surveillance of FPC . 31 7 Marking and labelling . 31 Annex ZA (in

16、formative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 33 BS EN 16240:2013EN 16240:2013 (E) 3 ZA.1 Scope and relevant characteristics . 33 ZA.2 Procedure for AVCP of light transmitting flat solid polycarbonate sheets . 36 ZA.2.1 Systems of

17、 AVCP 36 ZA.2.2 Declaration of performance (DoP) . 38 ZA.3 CE marking and labelling 42 Bibliography 45 BS EN 16240:2013EN 16240:2013 (E) 4 Foreword This document (EN 16240:2013) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinuous laying and products for wall

18、 cladding”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June 2014. At

19、tention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission

20、and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

21、 following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

22、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16240:2013EN 16240:2013 (E) 5 Introduction This document describes the requirements for light transmitting flat solid PC sheets for internal and external use in walls, roofs a

23、nd ceilings. It is applicable to the sheets for the delivery only. Reference should be made to national regulations and manufacturer literature for requirements concerning the design, storage and fundamental guidance for installation of sheets, including all safety aspects. The standards and guideli

24、ne addressing light transmitting flat solid PC sheets for building applications are the following: EN 1873, Prefabricated accessories for roofing Individual roof lights of plastics Product specification and test methods (harmonized standard) EN 14963, Roof coverings Continuous rooflights of plastics

25、 with or without upstands Classification, requirements and test methods (harmonized standard) EOTA ETA-Guideline 010, Self supporting translucent roof kits The flat solid PC sheets that satisfy the requirements of this document are suitable for use as components in accordance with EN 1873, EN 14963

26、or ETAG 010. BS EN 16240:2013EN 16240:2013 (E) 6 1 Scope This European Standard specifies the requirements for light transmitting flat solid polycarbonate (PC) sheets for internal and external use in walls, roofs and ceilings. This European Standard applies to light transmitting flat extruded solid

27、PC sheets of minimum thickness 2 mm, without or with uniform functional layers (e.g. coating, co-extruded layer) made from PC-based or other materials. It also specifies the test methods needed for the evaluation of conformity and marking of the sheets. 2 Normative references The following documents

28、, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1990:2002, Eurocode - Basis

29、 of structural design EN 1873:2005, Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests

30、EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13501-5, Fire classification of construction products and building elements - Part 5: Classification using data from extern

31、al fire exposure to roofs tests EN 13823, Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item EN 14500:2008, Blinds and shutters - Thermal and visual comfort - Test and calculation methods EN 14963:2006, Roof cov

32、erings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods EN ISO 178:2010, Plastics - Determination of flexural properties (ISO 178:2010) EN ISO 472:2013, Plastics - Vocabulary (ISO 472:2013) EN ISO 527-1:2012, Plastics - Determination of ten

33、sile properties - Part 1: General principles (ISO 527-1:2012) EN ISO 527-2, Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2) EN ISO 717-1, Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Ai

34、rborne sound insulation (ISO 717-1) EN ISO 1043-1:2011, Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) BS EN 16240:2013EN 16240:2013 (E) 7 EN ISO 1716, Reaction to fire tests for products - Determination of the gross heat of comb

35、ustion (calorific value) (ISO 1716) EN ISO 4892-2:2013, Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) EN ISO 6603-1, Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1)

36、 EN ISO 6946, Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946) EN ISO 10140-1:2010, Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2010)

37、 EN ISO 10140-2, Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2) EN ISO 10140-4, Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements

38、(ISO 10140) EN ISO 10140-5, Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5) EN ISO 11664-1, Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1) EN ISO 11664-2, Colorimetry - Part 2:

39、 CIE standard illuminants (ISO 11664-2) EN ISO 11925-2, Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2) EN ISO 12572, Hygrothermal performance of building materials and products - Determination of water vapou

40、r transmission properties (ISO 12572) ISO 11359-2, Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature ETAG 010, Self supporting translucent roof kits 3 Terms, definitions and symbols 3.1 Terms and definitions

41、 For the purposes of this document, the terms and definitions given in EN ISO 472:2013, EN ISO 1043-1:2011 and the following apply. 3.1.1 PC sheet flat extruded sheet substantially made of polycarbonate polymer to which are added those additives to facilitate the manufacture of sheet conforming to t

42、he requirements of this standard and customer requirements Note 1 to entry: Additives can be e.g. lubricants, processing aids, UV absorbers, colorants, functional layers and/or flame retardants. Note 2 to entry: There is a distinction between a coloured sheet containing colorants and an uncoloured s

43、heet having a coloured functional layer or paint on the external surfaces. BS EN 16240:2013EN 16240:2013 (E) 8 3.1.2 indirect test IT test performed by the manufacturer, different from that specified for that particular characteristic, having verified its correlation with the specified test 3.1.3 sh

44、eet length dimension of a sheet in the extrusion direction Note 1 to entry: It is expressed in millimetres. 3.1.4 sheet width dimension of a sheet perpendicular to the extrusion direction Note 1 to entry: It is expressed in millimetres. 3.2 Symbols For the purposes of this document, the symbols and

45、the relevant subclauses are given in Table 1. Table 1 Symbols Symbols Term/definition Relevant subclause d1Flatness across the sheet width 5.1.8 d2Flatness across the sheet width 5.1.8 Ef Flexural modulus 4.7 and 5.5.2 g Total solar energy transmittance 4.4 h Overall sheet thickness 4.9 and 5.5.3 he

46、External heat transfer coefficient 4.4 and 4.9 hiInternal heat transfer coefficient 4.4 and 4.9 LspLength of a test specimen 5.1 m Mass of a test specimen 5.1.5; 5.1.6 qiSecondary internal heat transfer factor 4.4 RseExternal surface resistance 4.9 RsiInternal surface resistance 4.9 RTTotal thermal

47、resistance 4.9 Rw(C;Ctr) Sound reduction index 4.8; 5.6 U Thermal transmittance 4.9 WsSheet width 5.1 YI Yellowness index 4.6.1.2 and 5.3 Linear thermal expansion 4.12 eSolar direct absorbance 4.4 Water vapour permeability 4.10 Y Variation of yellowness index 4.6.1.2 and 5.3 Design thermal conductiv

48、ity 4.9 Poissons ratio 4.7 BS EN 16240:2013EN 16240:2013 (E) 9 aMass per unit area 5.1.5 eSolar direct reflectance 4.4 MTensile stress at yield 4.7 and 5.5.3 eSolar direct transmittance 4.4 e,n-hNormal-hemispherical solar transmittance (see 4.3, NOTE 1). 4.3 vLight transmittance 4.3 v,n-hNormal-hemi

49、spherical light transmittance (see 4.3, NOTES 1 and 2). 4.3 4 Requirements 4.1 Visual appearance The sheets shall have regular, smooth or patterned surfaces. There shall be no scratches, marks or other defects larger than 4 mm2each anywhere on the sheet surface. There shall be no obvious bubbles, inclusions, cracks, depressions or other defects anywhere in the sheets that could adversely affect the performance of the sheets in its intended application. The edges of the sheet shall be straight and cut cleanly. The colour distribution s