BS EN 15459-1-2017 Energy performance of buildings Economic evaluation procedure for energy systems in buildings Calculation procedures Module M1-14《建筑物的能量性能 建筑物内能量系统用经济评价程序 计算程序，模.pdf

《BS EN 15459-1-2017 Energy performance of buildings Economic evaluation procedure for energy systems in buildings Calculation procedures Module M1-14《建筑物的能量性能 建筑物内能量系统用经济评价程序 计算程序，模.pdf》由会员分享，可在线阅读，更多相关《BS EN 15459-1-2017 Energy performance of buildings Economic evaluation procedure for energy systems in buildings Calculation procedures Module M1-14《建筑物的能量性能 建筑物内能量系统用经济评价程序 计算程序，模.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、Energy performance of buildings - Economic evaluation procedure for energy systems in buildingsPart 1: Calculation procedures, Module M1-14BS EN 15459-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15459-1 M

2、ay 2017 ICS 91.140.10 Supersedes EN 15459:2007English Version Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 Performance nergtique des btiments - Procdure dvaluation conomique des systmes nergtiques des b

3、timents - Partie 1 : Mthode de calcul, Module M1-14 Energieeffizienz von Gebuden - Heizungsanlagen und wassergefhrte Khlanlagen in Gebuden - Teil 1: Wirtschaftlichkeitsberechnungen fr Energieanlagen in Gebuden, Modul M1-14 This European Standard was approved by CEN on 27 February 2017. CEN members a

4、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

5、 the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management C

6、entre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

7、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marni

8、x 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15459-1:2017 ENational forewordThis British Standard is the UK implementation of EN 15459-1:2017. It supersedes BS EN 15459:2007, which is withdrawn.The UK

9、participation in its preparation was entrusted to Technical Committee RHE/24, Heating systems and water based cooling systems in buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary

10、provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87452 9ICS 91.140.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was pu

11、blished under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 154591:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15459-1 May 2017 ICS 91.140.10 Supersedes EN 15459:2007Engl

12、ish Version Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 Performance nergtique des btiments - Procdure dvaluation conomique des systmes nergtiques des btiments - Partie 1 : Mthode de calcul, Module M1-1

13、4 Energieeffizienz von Gebuden - Heizungsanlagen und wassergefhrte Khlanlagen in Gebuden - Teil 1: Wirtschaftlichkeitsberechnungen fr Energieanlagen in Gebuden, Modul M1-14 This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal R

14、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN m

15、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions

16、. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola

17、nd, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of explo

18、itation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15459-1:2017 EBS EN 154591:2017EN 15459-1:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 7 2 Normative references . 11 3 Terms and definitions 11 4 Symbols and abbreviations 15 4.1 Sy

19、mbols 15 4.2 Subscripts 16 5 Description of the method 17 5.1 General . 17 5.2 Output of the method 17 5.3 Parameters used for economic calculation 18 5.3.1 Discount rate and present value factor 18 5.3.2 Initial costs . 19 5.3.3 Annual costs . 19 5.3.4 Final costs . 19 6 Presentation of the economi

20、c calculation . 21 6.1 Output data . 21 6.2 Calculation time steps 21 6.3 Input data 22 6.3.1 Scenarios and boundaries . 22 6.3.2 General input data . 22 6.3.3 Specific input data for products and services 22 6.4 Step by step calculation . 24 6.4.1 General . 24 6.4.2 STEP 1 - Financial data . 24 6.4

21、.3 STEP 2 - Project data . 25 6.4.4 STEP 3 - Costs regarding components and systems (investment, replacement) 26 6.4.5 STEP 4 - Energy cost (as part of the annual costs) 30 6.4.6 STEP 5 - Global cost calculation 31 6.4.7 Calculation of Payback period . 32 7 Quality control 33 7.1 Calculation report

22、33 7.2 Comparison of different options . 34 8 Compliance check. 35 Annex A (normative) Template for input data and choices . 36 A.1 Financial data 36 A.2 Calculation period 36 A.3 Valuation of the costs for products and services 36 A.4 Valuation of costs for energy . 37 Annex B (informative) Default

23、 input data 38 B.1 Financial data 38 B.2 Calculation period 38 BS EN 154591:2017EN 15459-1:2017 (E) 3 B.3 Valuation of the costs for products and services. 39 B.4 Valuation of costs for energy 39 Annex C (informative) Selection for methods . 41 C.1 General . 41 C.2 Selection between methods A and B

24、41 Annex D (informative) Data for components . 42 Annex E (informative) Description of systems 45 Bibliography . 52 BS EN 154591:2017EN 15459-1:2017 (E) 4 European foreword This document (EN 15459-1:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling sy

25、stems in buildings”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at the latest by

26、November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15459:2007. This document has been prepared

27、 under a mandate given to CEN by the European Commission and the European Free Trade Association. EN 15459, Energy performance of buildings Economic evaluation procedure for energy systems in buildings, is composed with the following parts: Part 1: Calculation procedures, Module M1-14; Part 2: Expla

28、nation and justification of EN 15459-1, Module M1-14 CEN/TR. The revision kept the main principles of the calculation unchanged, but the structure of the document was changed. Informative content was removed to the accompanying Technical Report CEN/TR 15459-2. The values may be altered in a national

29、 annex. The main changes compared to EN 15459:2007 are: a) addition of the payback period and the addition of costs due to the end of life of the building; b) update based on the evolution of the annual costs over a specific time period; c) informative content is removed to the accompanying Technica

30、l Report CEN/TR 15459-2. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic

31、of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 154591:2017EN 15459-1:2017 (E) 5 Introduction Th

32、is European Standard is part of a series of standards aiming at international harmonization of the methodology for the assessment of the energy performance of buildings, called “set of EPB standards”. All EPB standards follow specific rules to ensure overall consistency, unambiguity and transparency

33、. All EPB standards provide a certain flexibility with regard to the methods, the required input data and references to other EPB standards, by the introduction of a normative template in Annex A and Annex B with informative default choices. For the correct use of this standard a normative template

34、is given in Annex A to specify these choices. Informative default choices are provided in Annex B. CEN/TC 228 deals with heating systems in buildings. Subjects covered by CEN/TC 228 are: energy performance calculation for heating systems; inspection of heating systems; design of heating systems; ins

35、tallation and commissioning of heating systems. This standard gives a method for the economic calculation of the building envelope and others building related systems covered by the EPB standards. This method can be used, fully or partly, for the following applications: consider economic feasibility

36、 of energy saving options in buildings; compare different solutions of energy saving options in buildings (plant types, fuels); evaluate economic performance of an overall design of the building (for example, trade-off between energy demand and energy efficiency of heating systems); assess the effec

37、t of possible energy conservation measures on an existing heating system, by economic calculation of the cost of energy use with and without the energy conservation measure. For the correct use of this standard, Annex A will be used to specify the choices with the required input data. Information an

38、d guidance on use of the monthly and annual methods are provided in Annex B. In case the standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the application within t

39、he context of EU Directives transposed into national legal requirements. These choices can be made available as National Annex or as separate (e.g. legal) document. It is expected, if the default values and choices in Annex A are not followed due to national regulations, policy or traditions, that:

40、either the national standardization body will consider the possibility to add or include a National Annex in agreement with the template of Annex A; or the national or regional authorities will, in the building regulations, reference the standard and prepare data sheets containing the national or re

41、gional choices and values, in agreement with the template of Annex A. The user should refer to other European Standards or to national documents for input data and detailed calculation procedures not provided by this standard, especially dynamic economical calculation are BS EN 154591:2017EN 15459-1

42、:2017 (E) 6 not detailed in this standard. The methods to calculate the building energy demand are provided by EN 15603. NOTE Sensitivity of results increase depending on the number of parameters that are under consideration (lifetime, financial rates, ratio of price rise rates,) and as numerous are

43、 the parameters that change when comparing different solutions, as difficult will be the conclusions that rise when economic results are compared between solutions. Economical results are closely related to the project under consideration, and no general conclusion should be drawn from such results.

44、 BS EN 154591:2017EN 15459-1:2017 (E) 7 1 Scope This European Standard provides a calculation method for the economic issues of heating systems and other systems that are involved in the energy demand and consumption of the building. It applies to all types of new and existing buildings. The fundame

45、ntal principles and terminology are explained in the standard. The main items of the standard will be: the definitions and the structure of the types of costs which should be taken into account for the calculation of the economic efficiency of saving options in buildings; data needed for definition

46、of costs related to systems under consideration; the calculation method(s); expression of the result of the economic study. This European Standard is part of the method for calculation of economic performance of energy saving options in buildings (e.g. insulation, better performing generators and di

47、stribution systems, efficient lighting, renewable sources, combined heat and power). The scope of this specific part is to standardize: the required inputs; the required outputs; the calculation formulas; the type of energy systems concerned with the energy performance of the building. NOTE 1 This i

48、s the revision of EN 15459:2007. The revision has been made consistent with the EU regulation on cost-optimal. This revision includes the definition of payback for investment, and inclusion of the costs due to the deconstruction of the building. The method presenting annualized costs has been suppre

49、ssed. NOTE 2 This standard does not consider financial advantages for higher productivity, higher attractiveness for tenants due to higher indoor comfort, when relevant for comparison of different options. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1. NOTE 3 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and a