BS EN 15069-2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel《家用气体燃料器具连接用金属软管组件的安全燃气连接阀门》.pdf

《BS EN 15069-2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel《家用气体燃料器具连接用金属软管组件的安全燃气连接阀门》.pdf》由会员分享，可在线阅读，更多相关《BS EN 15069-2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel《家用气体燃料器具连接用金属软管组件的安全燃气连接阀门》.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 15069:2008Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuelICS 23.060.40; 91.140.40g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g

2、3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15069:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2008 BSI 2008ISBN 978 0 580 54780 5National forewordThis British Standard is the UK implement

3、ation of EN 15069:2008. The UK participation in its preparation was entrusted to Technical Committee GSE/1, Gas fittings and connections.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary pr

4、ovisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15069March 2008ICS 23.060.40; 91.140

5、.40English VersionSafety gas connection valves for metal hose assemblies usedfor the connection of domestic appliances using gaseous fuelDispositifs de raccordement de scurit pour appareils usage domestique utilisant les combustibles gazeux etaliments par tuyau mtallique onduleuxSicherheitsgasanschl

6、ussarmaturen fr den Anschluss vonGasgerten mit Gasschlauchleitungen in derHausinstallation fr brennbare GaseThis European Standard was approved by CEN on 2 February 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanS

7、tandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, Fren

8、ch, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Cz

9、ech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPE

10、N DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15069:2008: EEN 15069:2008 (E) 2 Contents Page Foreword5 Introduction .6 1 Sc

11、ope 6 2 Normative references 6 3 Terms and definitions .7 4 General requirements9 4.1 SC valve types9 4.2 Classification10 4.2.1 Temperature classes .10 4.2.2 Pressure classes10 4.3 Construction requirements.10 4.3.1 General10 4.3.2 Materials .11 4.3.3 Nominal sizes.11 4.4 Construction.11 4.5 Connec

12、tion .12 4.5.1 General12 4.5.2 Connection and disconnection 12 4.5.3 Disconnection 12 4.5.4 Rotation 12 4.6 Operation 12 4.6.1 General12 4.6.2 Manual operated control (if fitted).12 4.7 Dangerous substances .12 5 Performance requirements and tests 13 5.1 General13 5.2 Test end fittings .13 5.3 Test

13、sequence schedule .13 5.4 Leak-tightness15 5.4.1 Angular seal .15 5.4.2 External leak-tightness .15 5.4.3 Internal leak-tightness.16 5.5 Internal Pressure16 5.5.1 Requirements.16 5.5.2 Test17 5.6 Rated flow rate .17 5.6.1 Requirements.17 5.6.2 Test17 5.7 Tensile strength resistance 19 5.7.1 Requirem

14、ents.19 5.7.2 Tests19 5.8 Bending resistance20 5.8.1 Requirements.20 5.8.2 Tests20 5.9 Resistance to torsion 20 5.9.1 Requirements.20 5.9.2 Tests20 5.10 Resistance to impact.21 5.10.1 Requirements.21 BS EN 15069:2008EN 15069:2008 (E) 3 5.10.2 Tests .21 5.11 Durability 22 5.11.1 Durability of the man

15、ually operated control SC valve.22 5.11.2 Durability of connection and disconnection 23 5.11.3 Rotation durability of the SC valve outlet.23 5.11.4 Temperature durability - Thermal ageing23 5.12 High and low temperature resistance .24 5.12.1 Low temperature resistance.24 5.12.2 High temperature resi

16、stance (only for SC valve without TSD).26 5.12.3 Leak-tightness during thermal load (only for SC valve with TSD) .26 5.13 Resistance to lubricants.26 5.13.1 General .26 5.13.2 Requirement.26 5.13.3 Test .26 5.14 Reaction to fire 27 5.14.1 Requirement.27 5.14.2 Testing and assessment methods.27 5.15

17、Resistance to gas 27 5.15.1 General .27 5.15.2 Requirement.27 5.15.3 Test .27 5.16 Corrosion resistance.28 5.16.1 Requirement.28 5.16.2 Test .28 5.17 Operating torque for a manually operated control SC valve 28 5.17.1 Requirement.28 5.17.2 Test .28 5.18 Operating strength for a safety quick connecti

18、on SC valve.29 5.18.1 Requirement.29 5.18.2 Test .29 5.19 Stop resistance29 5.19.1 Requirement.29 5.19.2 Test .30 5.20 SC valves type 2 and 430 5.20.1 Leak-tightness of the OSD30 5.20.2 Overflow safety rate 30 5.20.3 Overflow safety durability.31 5.20.4 Normal flow durability.31 5.21 Electrical cont

19、inuity 32 5.21.1 Requirement.32 5.21.2 Test .32 5.22 Leak-tightness of the system with non-metal components32 5.22.1 Requirement.32 5.22.2 Test .32 5.23 SC valves type 3 and 433 5.23.1 Reaction to temperature .33 6 Evaluation of conformity 33 6.1 General .33 6.2 Type testing .33 6.2.1 Initial type t

20、esting (ITT) .33 6.2.2 Subsequent type testing.34 6.3 Factory production control (FPC)34 6.3.1 General .34 6.3.2 FPC requirements for all manufacturers.34 6.3.3 Manufacturer-specific FPC system requirements .36 6.4 Installation instructions37 6.5 Packaging.38 BS EN 15069:2008EN 15069:2008 (E) 4 Anne

21、x A (informative) SC valve and hose fitting design requirements for connection to the gas supply pipework or to the pressure reduction device of portable gas bottles .39 Annex B (informative) Test end fitting 58 Annex ZA (informative) Clauses of this European Standard addressing the provision of the

22、 EU Construction Products Directive59 ZA.1 Scope and relevant characteristics .59 ZA.2 Procedure for attestation of conformity of SC valves .60 ZA.2.1 System of attestation of conformity 60 ZA.2.2 EC Certificate and Declaration of conformity.63 ZA.3 CE marking and labeling.64 Bibliography 66 BS EN 1

23、5069:2008EN 15069:2008 (E) 5 Foreword This document (EN 15069:2008) has been prepared by Technical Committee CEN/TC 236 “Non industrial manually operated shut-off valves for gas and particular combinations valves-other products”, the secretariat of which is held by UNI. This European Standard shall

24、be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this doc

25、ument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requireme

26、nts of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European

27、 Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kin

28、gdom. BS EN 15069:2008EN 15069:2008 (E) 6 Introduction This European Standard contains product characteristics relating to the safety of persons, animal and property and the protection of their environment. The objective of this European Standard is to achieve safe operation of connection valves by

29、specifying the requirements of performance, materials and test methods. Safety gas connection valves are used internally to connect gas appliances including movable gas appliances and externally to connect appliances such as grills, gas radiation heating, lights etc. Valves manufactured to this Euro

30、pean Standard are designed to be used with compatible hose assemblies conforming to EN 14800 and prEN 15070:2007. Attention is drawn to the need for careful quality control as given in EN ISO 9001:2000. This European Standard is based on a balance of requirements given by the major national European

31、 Gas Authorities for valves and metal hose assemblies for the connection of domestic gas appliances. It reflects the recognised practise and technology of products approved today as well as the present culture of usage by the consumer. The introduction of new technologies supported by National Gas A

32、uthorities may require the adoption of this European Standard regarding individual requirements and tests. 1 Scope These valves are suitable for connection of the fixed gas supply system to domestic appliances inside or outside a dwelling using 2ndor 3rdFamily gases and at a pressure of up to and in

33、cluding 0,5 bar. These valves are designed for the use with either movable appliances or for the connection of fixed appliances. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For

34、 undated references, the latest edition of the referenced document (including any amendments) applies. EN 377, Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes EN 437:2003, Test gases Test pressures Applia

35、nce categories EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment EN 1503-1, Valves Materials for bodies, bonnets and covers Part 1: Steels specified in European Standards EN 1503-3, Valves Materials for bodies, bonnets and covers Part 3: Cast irons specified in E

36、uropean Standards BS EN 15069:2008EN 15069:2008 (E) 7 EN 1503-4, Valves Materials for bodies, bonnets and covers Part 4: Copper alloys specified in European Standards EN 1775:2007, Gas supply Gas pipework for buildings Maximum operating pressure less than or equal to 5 bar Functional recommendations

37、 EN 10222 (all parts), Steel forgings for pressure purposes EN 10277-3, Bright steel products Technical delivery conditions Part 3: Free-cutting steels EN 13501-1:2007, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN

38、 60335-1:2002, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227:2006) EN ISO 11925-2

39、, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2:2002) ISO 1817:2005, Rubber, vulcanized Determination of the effect of liquids 3 Terms and definitions For the purposes of this document, the following te

40、rms and definitions apply. 3.1 Connections 3.1.1 safety connection valve component which permits or interrupts the flow of gas by the movement of a closure device which is operated by the connection or disconnection of a metal hose assembly where the valve inlet is connected to the gas installation

41、pipework and whose outlet connects mechanically to the metal hose assembly and prevents any gas flow if the hose assembly is disconnected. In addition it can incorporate an overflow safety device or a thermal safety device. It also can be combined with a manually operated valve 3.1.2 safety quick co

42、nnection end fitting consisting of two parts that is designed to permit quick connection and disconnection without tools, the device is leak-tight such that it prevents the release of gas from the upstream pipe work when disconnected and is designed to prevent accidental disconnection and incorrect

43、operation 3.1.3 threaded connection connection which is gas tight achieved either by metal to metal contact in the thread or by assistance of a gasket. This connection can only be assembled and disassembled with an appropriate tool 3.2 SC valve abbreviation used in this European Standard to denote a

44、 safety connection valve as defined in 3.1 BS EN 15069:2008EN 15069:2008 (E) 8 3.3 domestic appliance appliance intended for use by individual householders inside or outside a dwelling 3.4 standard reference conditions conditions to which all measured values are corrected (temperature: 15 C, absolut

45、e pressure 101,325 Pa, dry air) 3.5 SC valve inlet part of the SC valve which is connected to the gas installation pipe 3.6 SC valve outlet part of the SC valve which is connected to the assembly 3.7 Leak-tightness 3.7.1 external leak-tightness leak-tightness of a gas carrying component with respect

46、 to atmosphere. Distinction shall be made between: external leak-tightness with the SC valve connected; external leak-tightness with the SC valve disconnected 3.7.2 internal leak-tightness leak-tightness between the inlet and outlet of the manually operated device of the SC valve (if it exists), wit

47、h the closure device moved to the closed position 3.8 Pressures 3.8.1 inlet pressure pressure at the inlet of the SC valve 3.8.2 outlet pressure pressure at the outlet of the SC valve 3.8.3 maximum operating pressure (MOP) maximum pressure at which a SC valve can be operated continuously, under norm

48、al operating conditions 3.8.4 test pressure pressure to be applied during the test 3.8.5 pressure drop difference between the inlet and the outlet pressures BS EN 15069:2008EN 15069:2008 (E) 9 3.9 Flow 3.9.1 rated flow rate flow rate of air under standard reference conditions, at a given pressure dr

49、op 3.9.2 overflow safety device (OSD) safety device which automatically interrupts the flow of gas if it exceeds a preset value 3.9.3 overflow safety level flow rate of air at which the overflow safety device interrupts the flow of gas 3.10 Temperatures 3.10.1 maximum operating temperature (MOT) maximum temperature at which a SC valve can be operated continuously, under normal operating conditions 3.10.2 minimum operating temperature (mOT) lowest temperature at which a SC valve can be operated continuously, under normal operatin