BS EN 14350-1-2004 Child use and care articles - Drinking equipment - General and mechanical requirements and tests《儿童使用和保育用品 饮水用具 一般和机械要求及试验》.pdf

《BS EN 14350-1-2004 Child use and care articles - Drinking equipment - General and mechanical requirements and tests《儿童使用和保育用品 饮水用具 一般和机械要求及试验》.pdf》由会员分享，可在线阅读，更多相关《BS EN 14350-1-2004 Child use and care articles - Drinking equipment - General and mechanical requirements and tests《儿童使用和保育用品 饮水用具 一般和机械要求及试验》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14350-1:2004 Child use and care articles Drinking equipment Part 1: General and mechanical requirements and tests The European Standard EN 14350-1:2004 has the status of a British Standard ICS 97.190 BS EN 14350-1:2004 This British Standard was published under the authority of

2、 the Standards Policy and Strategy Committee on 26 November 2004 BSI 26 November 2004 ISBN 0 580 44911 4 National foreword This British Standard is the official English language version of EN 14350-1:2004. The UK participation in its preparation was entrusted to Technical Committee CW/42, Baby sooth

3、ers, soother holders, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI

4、 Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

5、ts correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK intere

6、sts informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 24, an inside back cover and a back cover. The BSI copyright notice displayed in this docu

7、ment indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN143501 August2004 ICS97.190 Englishversion ChilduseandcarearticlesDrinkingequipmentPart1: Generalandmechanicalrequirementsandtests Articlesdepu

8、ricultureArticlespourlalimentationliquide Partie1:Exigencesgnralesetmcaniquesetessais ArtikelfrSuglingeundKleinkinderArtikelfrflssige KindernahrungTeil1:Allgemeineundmechanische AnforderungenundPrfungen ThisEuropeanStandardwasapprovedbyCENon30April2004. CENmembersareboundtocomplywiththeCEN/CENELECIn

9、ternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeof

10、ficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Esto

11、nia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCe

12、ntre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN143501:2004:EEN 14350-1:2004 (E) 2 Contents page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Description .6 5 Requir

13、ements.10 5.1 General10 5.2 Visual and tactile examination .10 5.3 Small parts10 5.4 Volume 11 5.4.1 Volumetric labelling.11 5.4.2 Volumetric accuracy12 5.5 Resistance to tearing 12 5.6 Additional requirements for re-usable products 12 5.6.1 Resistance to boiling water 12 5.6.2 Print adhesion of mar

14、kings and decorations .12 5.6.3 Thermal shock12 5.7 Additional requirements for sealing discs12 5.8 Requirements for matched components.12 5.8.1 Includes protrusions .12 5.8.2 Includes straws12 5.9 Requirements for protrusions13 5.10 Requirements for straws.13 6 Tests13 6.1 Preparation of samples .1

15、3 6.1.1 Re-usable13 6.1.2 Single-use.13 6.1.3 Conditioning.13 6.2 Order of testing13 6.3 Tear resistance test .15 6.3.1 Test method15 6.3.2 Tensile test .16 6.4 Volumetric accuracy test 16 6.5 Thermal shock test 17 6.6 Template test17 6.7 Security/retention test.18 6.7.1 Principle18 6.7.2 Test proce

16、dure.18 6.8 Flexibility test.19 6.8.1 Principle19 6.8.2 Method 19 7 Consumer packaging 19 8 Product information.20 8.1 General20 8.2 Purchase information20 8.3 Instructions for use .20 Annex A (informative) A-deviations.23 Bibliography 24 EN 14350-1:2004 (E) 3 Foreword This document EN 14350-1:2004

17、has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and con

18、flicting national standards shall be withdrawn at the latest by February 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,

19、 Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. This European Standard EN 14350 “Child use and care articles Drinking equipment“ co

20、nsists of the following parts: Part 1: General and mechanical requirements and tests Part 2: Chemical requirements and tests EN 14350-1:2004 (E) 4 Introduction This document establishes minimum safety requirements and gives appropriate test methods for childrens drinking equipment. The complete docu

21、ment harmonises for the first time minimum safety requirements and test methods for childrens drinking equipment. Some of the provisions have been taken from other existing national and European Standards and for these provisions the Technical Committee has relied on previous validation. It is not p

22、ermitted to claim compliance with individual parts of this document. Any claim relates to all published parts. A significant choking hazard can arise if the component parts of drinking equipment become separated during use. This hazard is addressed in this document by the inclusion of a security tes

23、t. However, as the fixing of such products to the container is user-dependent, the risk of an accident cannot be completely eliminated. This document sets out labelling requirements stating that parents or carers should not leave children unattended whilst being fed with a product containing a feedi

24、ng teat or drinking accessory and that children should not be allowed to use feeding teats as a soother. The Technical Committee considered the possibility of standardizing both the sizes of feeding teats and ranges of flow rates. However, it was decided that the many combinations of container syste

25、ms in use precluded the standardization of sizes. It is recommended that all container and feeding teat combinations used are matched components. The provision of meaningful flow rate information is difficult because of several factors including hole diameter, teat thickness, hole shape /type of fee

26、d, and also how individual infants suck the teat. Accordingly, it was decided not to include a test for flow rate but to recommend that manufacturers provide information on flow rate and hole size that is appropriate to their particular product. It is recommended that manufacturers and suppliers ope

27、rate to EN ISO 9001 1 standard for quality management systems. EN 14350-1:2004 (E) 5 1 Scope This part of this document specifies general and mechanical requirements for materials to be used for the manufacture of: Re-usable feeding teats and drinking accessories; Re-usable feeding bottles and drink

28、ing cups; Single-use feeding bottles, feeding teats, feeding bags and drinking accessories, which do not contain fluid when purchased. It includes test methods for the mechanical safety requirements specified. It does not apply to drinking equipment designed for medical applications or for use under

29、 medical supervision. This document is not applicable to soothers. Safety requirements and test methods for soothers are specified in EN 1400-1, EN1400-2 and EN 1400-3. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated referen

30、ces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 291, Plastics - Standard atmospheres for conditioning and testing EN ISO 2409, Paints and varnishes - Cross-cut test (ISO 2409:1992). EN ISO 3696, Wat

31、er for analytical laboratory use - Specification and test methods (ISO 3696:1987). ISO 188, Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 feeding teat subst

32、itute mothers nipple that when attached to a container permits a child to obtain fluid by suckling 3.2 drinking accessory any device other than a feeding teat which permits a child to obtain fluid from a container EXAMPLE feeding spout 3.2.1 straw hollow tube drinking accessory through which fluid i

33、s sucked 3.3 container either a feeding bottle, drinking cup or feeding bag EN 14350-1:2004 (E) 6 3.3.1 feeding bottle container which is capable of holding a fluid and incorporates a graduated scale suitable for visual measurement and is intended for feeding a child through a feeding teat or drinki

34、ng accessory 3.3.2 drinking cup container other than a feeding bottle or feeding bag capable of holding a fluid intended for feeding a child 3.3.3 feeding bag bag capable of holding fluid and supported for use by a holder NOTE Feeding bags are also known as feeding liners 3.4 locking ring component

35、used to secure a feeding teat or drinking accessory to a container 3.5 sealing disc component used to create a seal between the container and the locking ring 3.6 protective cover component to cover a feeding teat or drinking accessory 3.7 matched components any of the above defined components which

36、 are used together whilst feeding a child 3.8 numbered graduations numbered markings which indicate the volume of fluid within the container 3.9 single-use feeding teat, drinking accessory or container any item of drinking equipment sold for single-use 3.10 re-usable component intended to be used ag

37、ain after first use 3.11 protrusions drinking accessory, feeding teat or spoon, excluding straws 4 Description Figures 1, 2, 3, 4 and 5 illustrate typical examples of different items of drinking equipment and their design features. EN 14350-1:2004 (E) 7 Key 1 Nipple 2 Feeding Hole/Holes Figure 1 Des

38、ign features of a feeding teat Figure 2 Examples of feeding teats EN 14350-1:2004 (E) 8 Key 1 Feeding spout 2 Trainer spout 3 Straw 4 Trainer spoon Figure 3 Examples of drinking accessories EN 14350-1:2004 (E) 9 Key 1 Protective cover 2 Locking ring 3 Feeding teat 4 Sealing disc 5 Feeding bottle 6 F

39、eeding bag 7 Numbered graduations 8 Holder for feeding bag Figure 4 Examples of containers with feeding teats EN 14350-1:2004 (E) 10 Key 1 Drinking cup 2 Drinking accessory/feeding spout Figure 5 Example of container with drinking accessory 5 Requirements 5.1 General Drinking equipment shall conform

40、 to 5.2 to 5.10. 5.2 Visual and tactile examination All components of drinking equipment when assembled for use shall be free from points and edges which are likely to cause injury. 5.3 Small parts All parts which are designed to be detached (e.g. for cleaning) shall not fit entirely within the smal

41、l parts cylinder (see Figure 6) in any orientation and without compression. EN 14350-1:2004 (E) 11 Dimensions in millimetres Figure 6 Small parts cylinder 5.4 Volume 5.4.1 Volumetric labelling 5.4.1.1 All feeding bottles, but not necessarily drinking cups, shall be marked with graduations at least i

42、n millilitres. 5.4.1.2 Feeding bottles All feeding bottles shall be marked at least once with the letters “ml”. NOTE 1 Additional units for measurement can be used if applicable. NOTE 2 Although this document only requires the provision of numbered graduations, further unnumbered graduations in any

43、position, may be provided. The lowest numbered graduation shall not be more than 60 ml. The highest numbered graduation shall be equal to the nominated maximum measurable use of the feeding bottle or container, e.g. 125 ml, 250 ml, 320 ml. The gap between numbered graduations shall not exceed 60 ml.

44、 5.4.1.3 Drinking cups Where drinking cups have one or more numbered graduations, the letters “ml“ shall appear at least once. NOTE 1 Additional units for measurement can be used if applicable. EN 14350-1:2004 (E) 12 Where a single numbered graduation is present on drinking cups it shall indicate th

45、e nominated maximum measurable use of the drinking cup, e.g. 125 ml, 250 ml, 320 ml. Where more than one numbered graduation is present on drinking cups, the gap between graduations shall not exceed 60 ml. 5.4.2 Volumetric accuracy When tested in accordance with 6.4 the volumetric accuracy of number

46、ed graduations on feeding bottles and drinking cups (if marked with numbered graduations), shall be as follows: numbered graduations 100 ml: 5 %; numbered graduations 100 ml: 5 ml. 5.5 Resistance to tearing When tested in accordance with 6.3, no feeding teats, drinking accessories (with the exceptio

47、n of drinking straws) which punctures in 6.3.1, shall break, tear or separate. 5.6 Additional requirements for re-usable products 5.6.1 Resistance to boiling water When tested in accordance with 6.1.1, there shall be no visual deformation or damage. 5.6.2 Print adhesion of markings and decorations W

48、hen tested in accordance with EN ISO 2409, no print from marked graduations or decorations, shall be removed from any products except single-use items. NOTE Where there is insufficient printed area as specified in EN ISO 2409, the largest print area available on the container should be used. 5.6.3 Thermal shock When tested in accordance with 6.5 no part of any product, shall crack or break. 5.7 Additional requirements for sealing discs The minimum diameter of a sealing disc sha