BS EN 13473-2-2001 Reinforcement Specifications for multi-axial multi-ply fabrics Methods of test and general requirements《加筋 多轴向多股纤维织物规范 试验方法和一般要求》.pdf

《BS EN 13473-2-2001 Reinforcement Specifications for multi-axial multi-ply fabrics Methods of test and general requirements《加筋 多轴向多股纤维织物规范 试验方法和一般要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13473-2-2001 Reinforcement Specifications for multi-axial multi-ply fabrics Methods of test and general requirements《加筋 多轴向多股纤维织物规范 试验方法和一般要求》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13473-2:2001Reinforcement Specifications for multi-axial multi-ply fabrics Part 2: Methods of test and general requirements The European Standard 13473-2:2001 has the status of a British Standard ICS 59.100.99; 83.120 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY CO

2、PYRIGHT LAWBS EN 13473-2:2001 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 August 2001 BSI 07-2001 ISBN 0 580 37759 8 National foreword Thi

3、s British Standard is the official English language version of EN 13473-2:2001. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: A list of organizations represented on this comm

4、ittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by u

5、sing the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immuni

6、ty from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summ

7、ary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORME

8、EUROPENNE EUROPISCHENORM EN134732 June2001 ICS59.100.99;83.120 Englishversion ReinforcementSpecificationsformultiaxialmultiplyfabrics Part2:Methodsoftestandgeneralrequirements RenfortSpcificationspourlestissusmultiaxiaux multicouchesPartie2:Mthodesdessaietexigences gnrales VerstrkungenSpezifikationf

9、rMultiaxialgelegeTeil2: PrfverfahrenundallgemeineProduktanforderungen ThisEuropeanStandardwasapprovedbyCENon10May2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelis

10、tsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguagean

11、dnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTE

12、EFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN134732:2001EPage2 EN134732:2001 Contents Page Foreword3 1 Scope 4 2 Normat

13、ivereferences 4 3 Termsanddefinitions. .4 4 Listofphysicalproperties . .4 5 Generalrequirements 5 5.1 Appearance.5 5.2 Packaging .6 5.3 Labelling .6 Bibliography 7Page3 EN134732:2001 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitteeCEN/TC249“Plastics“,thesecretariatof whichisheldbyIBN

14、. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyDecember2001,andconflictingnationalstandardsshallbewithdrawnatthelatest byDecember2001. ThisstandardisonepartofEN13473, ReinforcementSpecificationsformultiaxialmultiplyfab

15、rics whichis constructedasfollows: Part1:Designation Part2:Methodsoftestandgeneralrequirements Part3:Specificrequirements ThisstandardincludesaBibliography. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:A

16、ustria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden, SwitzerlandandtheUnitedKingdom.Page4 EN134732:2001 1Scope ThisPart2ofEN13473definesthetestmethodstobeusedtodeterminethedesignatedandspecifiedproperties given

17、inParts1and3respectively. Part2ofEN13473definesthegeneralrequirementsapplicabletothespecificationofalltypesofmultiaxialmulti plyfabricsfallingwithinthescopeofthisspecificationasdefinedinPart1ofthisstandard. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfro

18、motherpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatest

19、editionofthe publicationreferredtoapplies(includingamendments). EN134731, ReinforcementSpecificationsformultiaxialmultiplyfabricsPart1:Designation ENISO5274, PlasticsDeterminationoftensilepropertiesPart4:Testconditionsforisotropicandorthotropic fibrereinforcedplasticcomposites (ISO5274:1997) ENISO33

20、44, ReinforcementproductsDeterminationofmoisturecontent (ISO3344:1997) ENISO10548, CarbonfibreDeterminationofsizecontent (ISO10548:1994) ISO472, PlasticsVocabulary ISO1887, TextileglassDeterminationofcombustiblemattercontent ISO1888, TextileglassStaplefibresorfilamentsDeterminationofaveragediameter

21、ISO3374, ReinforcementproductsMatsandfabricsDeterminationofmassperunitarea ISO4603, TextileglassWovenfabricsDeterminationofthickness ISO5025, ReinforcementproductsWovenfabricsDeterminationofwidthandlength ISO11567, CarbonfibreDeterminationoffilamentdiameterandcrosssectionalarea 3 Termsanddefinitions

22、 ForthepurposesofthisEuropeanStandard,thefollowingdefinitionsgiveninISO472andEN134731apply. 4 Listofphysicalproperties Thelistofphysicalpropertieswiththeapplicabletestmethodshallbeconsideredasaguidefortheselectionofthe propertiesandlimitswhichresultoftechnicalspecificationsoftheapplication.Page5 EN1

23、34732:2001 Table1Listoftestmethods Properties Testmethods accordingto Remarks Lossonignition ISO1887 formultiaxialmultiplyfabricsmadeoutofglassfibresonly Sizecontent ENISO10548 formultiaxialmultiplyfabricsmadeoutofcarbon/aramidfibres Moisturecontent ENISO3344 formultiaxialmultiplyfabricsmadeoutofgla

24、ss/carbon/aramid fibres Filament diameter ISO 1888 formultiaxialmultiplyfabricsmadeoutofglassfibrefor designationonly Filamentdiameter ISO11567 formultiaxialmultiplyfabricsmadeoutofcarbon/aramidfibres fordesignationonly Massperunitarea ISO3374 forspecialmultiaxialmultiplyfabrics,e.g.fabricseasilygoi

25、ng outofshape,specialarrangementsshallbemade Length&width ISO5025 Fabricthickness ISO4603 Mechanicalpropertiesof laminate EN ISO 5274 I. Materialparametersderivedfromcompositetestsof differentreinforcementtextiles,e.g.wovenfabricsandmulti axialmultiplyfabrics,onlythencanbeconsultedforthe comparisono

26、fthereinforcementtextiles,ifthecomposite samplesareproducedwiththesamenumber,orientation, stackingsequenceandthesameareaweightofthe reinforcementthreadpliesandfurthermoretestedinthesame directionsaccordingtothecompositesampleconstruction.The useofthesameresintypeandthecorrespondingprocessing areobli

27、gatory. II. Anexactdescriptionoftheconstructionofthecomposite sampleshastobesecuredatthetimeoftheirproduction. III. Itisrecommendedtouseonlysampletype3describedin ENISO5274withawidthb=b 1of50 0,5mm. 5 Generalrequirements 5.1Appearance Themultiaxialmultiplyreinforcementfabrichavetobesubstantiallyfree

28、fromcontamination(e.g.oil,dirt,etc.) andshallnotcontainunacceptablelevelsofotherfaults(seeTable2below). OnthebasisofthedefectclassificationaccordingtoTable2,thetotalnumberofdefectsbypointsshallnotexceed 20per100m 2 withamaximumof3majordefects.Majordefectsshallbecounted2points,minordefects1point.A ma

29、ximumof2defectpointsshallbecountedpersquaremeter,evenifseveraldefectsoccursimultaneously.If requiredtheproductspecificationshalldefinealternativeacceptancelevels.Page6 EN134732:2001 Table2Listofdefects Defect Description Acceptancelevel Major defect Minor defect 1 Plyconstruction 1.1 Brokenormissing

30、thread 0thread: 1missingthread X 2ormorecontiguousmissingthreads X thread: 5ormorecontiguousmissingthreads X 1.2 Lanewithoutbrokenor missingthread(rightangled measuredtothreaddirection) 5.10mm 10mm X X 2 Bindingsystem 2.1 Brokensingleyarn( 300 mm)inloopsystem formultiaxialmultiplyconstructionswith0t

31、hreads onfabricsurface X forothermultiaxialmultiplyconstructions X 3 Multiaxialmultiplyfabric 3.1 Cuts,tears defectsgreaterthan10mm X 3.2 Dirtyspotsorstains widthandlengthlessthan50mm X widthandlengthequalandgreaterthan50mm X 3.3 Deviationofwidth widthbeyondspecifictolerances(seeEN134733) X 3.4 Fold

32、s X 5.2Packaging Thepackagingshallprotecttheproductduringhandling,storageandtransportation. 5.3Labelling Eachpackageshallbeidentifiedwith: 5.3.1 Designationcode(seeEN134731). 5.3.2 Totalmassperunitareaincludingplyconstructionandbindingsystem. 5.3.3 Width. 5.3.4 Length. 5.3.5 Weightofmultiaxialmultip

33、lyfabricpackage(net). 5.3.6 Defectdesignation. 5.3.7 Anyspecialhandling/storageinstructions. 5.3.8 Manufacturersproductionandtraceabilityreference.Page7 EN134732:2001 Bibliography ENISO5271, PlasticsDeterminationoftensilepropertiesPart1:Generalprincipals (ISO5271:1993including Corr.1:1994) ENISO1886

34、, ReinforcementfibresSamplingplansapplicabletoreceivedbatches (ISO1886:1990) ISO10432, PlasticsSymbolsPart2:Fillersandreinforcingmaterials ISO4921, KnittingBasicconceptsVocabularyBS EN 13473-2:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent nati

35、onal body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess t

36、he latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of

37、which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign st

38、andards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been pub

39、lished as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available

40、 which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and othe

41、r benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internation

42、al standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does

43、 not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.