BS EN 13126-5-2011 Building hardware Hardware for windows and door height windows Requirements and test methods Devices that restrict the opening of windows and door height windows.pdf

《BS EN 13126-5-2011 Building hardware Hardware for windows and door height windows Requirements and test methods Devices that restrict the opening of windows and door height windows.pdf》由会员分享，可在线阅读，更多相关《BS EN 13126-5-2011 Building hardware Hardware for windows and door height windows Requirements and test methods Devices that restrict the opening of windows and door height windows.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13126-5:2011Building hardware Hardwarefor windows and door heightwindows Requirements andtest methodsPart 5: Devices that restrict the opening ofwindows and door height win

2、dowsCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13126-5:2011. It supe

3、rsedes DD CEN/TS 13126-5:2004 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/538/4, Building hardware.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all

4、the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 63821 3 ICS 91.190 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and S

5、trategy Committee on 31 December 2011.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EUROPEAN ST

6、ANDARD NORME EUROPENNE EUROPISCHE NORM EN 13126-5 November 2011 ICS 91.190 Supersedes CEN/TS 13126-5:2004English Version Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows Qui

7、ncaillerie pour le btiment - Exigences et mthodes dessai des ferrures de fentres et portes-fentres - Partie 5: Dispositifs limiteurs douverture des fentres et portes-fentres Baubeschlge - Beschlge fr Fenster und Fenstertren - Anforderungen und Prfverfahren - Teil 5: Vorrichtungen zur Begrenzung des

8、ffnungswinkels von Fenstern This European Standard was approved by CEN on 15 October 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date l

9、ists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und

10、er the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

11、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NO

12、RMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13126-5:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo

13、reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 2 Contents Page Foreword 31 Scope 52 Normative references 53 Terms and definitions .54 Classification 64.1 General 64.2 Category of use (1 first digit) .64.3 Durability (2 second digit) 64.4 Mass

14、(3 third digit) 64.5 Fire resistance (4 fourth digit) .64.6 Safety in use (5 fifth digit) 64.7 Corrosion resistance (6 sixth digit) 74.8 Security (7 seventh digit) .74.9 Application (8 eighth digit) 74.10 Test sizes Size limitations (9 ninth digit) 84.11 Example of classification for devices that re

15、strict the opening of windows 95 Requirements .95.1 General 95.2 Initial opening test .95.3 Durability test 105.4 Mechanical strength test 115.5 Static load test 115.6 Percussion test . 125.7 Impact test . 125.8 Cutting test 126 Test equipment . 127 Test methods . 137.1 Samples . 137.2 Initial Openi

16、ng test procedure . 137.3 Durability test 147.4 Mechanical Strength test . 157.5 Static Load test procedure 167.6 Percussion test procedure 167.7 Impact test procedure 167.8 Cutting test procedure . 167.9 Corrosion resistance 17Annex A (informative) Test equipment . 18Annex B (normative) Test flow c

17、hart 22Bibliography . 23Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 3 Foreword This document (EN 13126-5:2011) has been prepared by Tech

18、nical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, an

19、d conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This do

20、cument supersedes CEN/TS 13126-5:2004. A full contribution to the preparation of this European Standard has been made by the European manufacturers organization “ARGE“ and national standards bodies. This European Standard is one of a series of European Standards dedicated to building hardware produc

21、ts. It is divided into many parts, the first part being common to all the other parts of this standards series, incorporating all types of hardware for windows and door height windows. Annex A (informative) of EN 13126-1 lists the titles of all parts of this European Standard and refers to their dif

22、ferent window opening-type applications. Annex B (informative) of EN 13126-1 provides a list of the elements of components used on the various types of window opening functions. The performance tests incorporated in this standard are considered to be reproducible and as such will provide a consisten

23、t and objective assessment of the performance of these products The main changes between this European Standard and the previous are Clause 3, Terms and definitions: Child safety restrictor added in 3.5; Clause 4, Classification: additional grades added in 4.6 (Safety in use); additional grades adde

24、d in 4.9 (Application); table with test sizes added in 4.10 (Test sizes); example of classification added in 4.11; Clause 5, Requirements: requirements in whole Clause 5 have been completely revised; Clause 7, Test methods: test methods in whole Clause 7 have been completely revised; Copyright Europ

25、ean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 4 tests for child safety restrictors added in 7.2.3 and 7.4.3; durability test revised completely in 7.3. A

26、ccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

27、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking perm

28、itted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 5 1 Scope This part of EN 13126 specifies requirements and test methods for durability, strength, security and functionality of devices that restrict the opening of windows and door height windows. NOTE 1 Restrictors and revers

29、e restrictors can be either a separate item of hardware or an integral part of hardware, for example a part of the operating gear or an integral part of a hinge. NOTE 2 Windows may be fitted with more than one restrictor. NOTE 3 The requirements included within this standard take the needs for child

30、 safety into consideration, child protective window restrictors intended to be installed by the end consumers are beyond the scope of this standard. Therefore, for the DIY market refer to PC398 and prEN 16281. 2 Normative references The following referenced documents are indispensable for the applic

31、ation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1670, Building hardware Corrosion resistance Requirements and test methods EN 12519, Windows and pedestrian doors

32、 Terminology EN 13049, Windows Soft and heavy body impact Test method, safety requirements and classification EN 13126-1, Building hardware Hardware for windows and door height windows Requirements and test methods Part 1: Requirements common to all types of hardware ISO 8317, Child-resistant packag

33、ing Requirements and testing procedures for reclosable packages 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13126-1 and EN 12519 and the following apply. 3.1 limiting restrictor (including maximum opening stops) device intended to limit the moveme

34、nt of an active sash to a predetermined position 3.2 holding restrictor (including peg type casement stays) mechanical device which is intended to hold the active sash in a predetermined position 3.3 reverse restrictor mechanical device which holds a reversed active sash securely for cleaning 3.4 sa

35、fety restrictor robust mechanical device intended to limit the initial movement of an active sash in a predetermined position, maximum 100 mm, to prevent accidental passage through the window Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repr

36、oduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 6 3.5 child safety restrictor robust mechanical device intended to limit the initial movement of an active sash in a predetermined position, maximum 89 mm, to prevent the passage of small children NOT

37、E Where child safety is achieved either through a restrictor that cannot be opened beyond the initial restricted position or through the use of a removable tool or implement, the window should not be used as a means of escape in the event of fire. 4 Classification 4.1 General The classification for

38、devices that restrict the opening of windows shall be in accordance with the requirements of EN 13126-1. 4.2 Category of use (1 first digit) No marking is required for the category of use in accordance with EN 13126-1. 4.3 Durability (2 second digit) Grades shall be in accordance with EN 13126-1. 4.

39、4 Mass (3 third digit) Grades shall be in accordance with EN 13126-1. 4.5 Fire resistance (4 fourth digit) Grades shall be in accordance with EN 13126-1. 4.6 Safety in use (5 fifth digit) One grade shall be identified in accordance with EN 13126-1. Hardware with safety requirements shall show a grad

40、e as generated from Table 1. The grade shall consist of two digits separated by a slash. The first of the digits shall represent the testing performed to conform to the selected safety requirements as shown in Table 2. The second of the digits shall represent the impact test drop height as shown in

41、5.7. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 7 Table 1 Safety in use grades Safety requirement grade Impact test drop height grade1

42、: No requirements 0 : No requirements 2 : Safety requirements 1 : 200 mm 3 : Child safety requirements 2 : 300 mm 3 : 450 mm 4 : 700 mm 5 : 950 mm EXAMPLE Grade 3/2 Child safety requirements. 300mm drop height for impact test. 4.7 Corrosion resistance (6 sixth digit) Grades shall be in accordance wi

43、th EN 13126-1. 4.8 Security (7 seventh digit) No marking is required for the category of security in accordance with EN 13126-1. 4.9 Application (8 eighth digit) The eighth digit shows a grade as indicated in Table 2 indicating the part of the standard which was used for testing the devices that res

44、trict the opening of windows in accordance with EN 13126-1. Seven grades are identified. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13126-5:2011EN 13126-5:2011 (E) 8 T

45、able 2 Application grade Safety in use grade (5thdigit) 1 2 3 Application Grade (8thdigit) 5/15/25/35/45/55/65/7Clause Description Limiting restrictorHolding restrictorReverse restrictorSafety limiting restrictorSafety holding restrictorChild safety limiting restrictorChild safety holding restrictor

46、5.2.2 Safety initial opening (max. 100 mm) X X 5.2.3 Child safety initial opening (max. 89 mm) X X 5.3.2 Restrictor operation cycle X X X X X X 5.3.3 Restrictor engage and release cycle X X X X X X X 5.4.2 Hold open strength 200 N X X X 5.4.3 Restrictor strength 350 N X X X X X 5.4.4 Child safety re

47、strictor strength 500 N X X 5.5 Static load X X X X 5.6 Percussion X X 5.7 Impact X X X X 5.8 Cutting X X X X 4.10 Test sizes Size limitations (9 ninth digit) The ninth digit shows the test sizes in accordance with EN 13126-1 as follows: S.W. (sash width) in mm / S.H. (sash height)in mm EXAMPLE 600

48、S.W. x 1 200 S.H. NOTE The specified sizes are a test sizes only. It does not relate to the maximum sizes to which a window may be fabricated. The window test size shall be determined by reference to the relevant part of the standards series for that hardware type or in accordance with Table 3. Table 3 Test window size (S.W. x S.H.) Test size A Test si