BS EN 12779-2015 Safety of woodworking machines Chip and dust extraction systems with fixed installation Safety requirements《木工机械安全性 带固定装置的除碎屑及吸尘装置 安全要求》.pdf

《BS EN 12779-2015 Safety of woodworking machines Chip and dust extraction systems with fixed installation Safety requirements《木工机械安全性 带固定装置的除碎屑及吸尘装置 安全要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12779-2015 Safety of woodworking machines Chip and dust extraction systems with fixed installation Safety requirements《木工机械安全性 带固定装置的除碎屑及吸尘装置 安全要求》.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 12779:2015Safety of woodworkingmachines Chip and dustextraction systems withfixed installation SafetyrequirementsBS EN 12779:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12779:2015.It supersedes BS EN 12779:2004+A1:2009 whi

2、ch is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/23, Woodworking machines.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a cont

3、ract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 84889 6ICS 79.120.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the autho

4、rity of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 12779:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12779 November 2015 ICS 79.120.10 Supersedes EN 12779:2004+A1:2009English Version Safe

5、ty of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements Scurit des machines pour le travail du bois - Installations fixes dextraction de copeaux et de poussires - Prescriptions de scurit Sicherheit von Holzbearbeitungsmaschinen - Ortsfeste Absaugan

6、lagen fr Holzstaub und Spne - Sicherheitstechnische Anforderungen This European Standard was approved by CEN on 26 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

7、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

8、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu

9、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN

10、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12779:2015 EBS EN 12

11、779:2015EN 12779:2015 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, terminology, symbols and units 9 3.1 Terms and definitions . 9 3.2 Terminology . 12 3.3 Symbols and units 12 4 List of significant hazards . 12 5 Safety requirement

12、s and/or measures 14 5.1 General . 14 5.2 Control systems 14 5.2.1 Safety and reliability of control systems . 14 5.2.2 Emergency stop . 14 5.2.3 Failure of the power supply 15 5.3 Protection against mechanical hazards . 15 5.3.1 Stability of structural parts 15 5.3.2 Shearing, crushing, drawing-in

13、. 15 5.3.3 Access to machinery 16 5.3.4 Pneumatics . 16 5.4 Protection against fire and explosion . 16 5.4.1 Hazards of fire and explosion 16 5.4.2 Fire protection and prevention . 18 5.4.3 Explosion . 19 5.5 Protection against noise 25 5.6 Protection against hazardous substances . 25 5.6.1 Dust emi

14、ssions 25 5.6.2 Performance requirements 26 5.6.3 Performance indication . 27 5.6.4 Reintroduction of dust . 27 5.7 Protection against electrical hazards . 28 5.8 Additional requirements for silos 28 5.8.1 Requirements for design and construction 28 5.8.2 Discharge system . 29 5.8.3 Openings for sil

15、os . 29 6 Information for use . 31 6.1 General . 31 6.2 Marking 31 6.3 Instruction handbook . 32 6.3.1 General . 32 6.3.2 Information related to installation 33 6.3.3 Information related to operation . 33 6.3.4 Information related to maintenance . 34 6.3.5 Information related to silos 34 BS EN 12779

16、:2015EN 12779:2015 (E) 3 6.3.6 Fire fighting. 35 6.3.7 Noise declaration 35 Annex A (informative) Examples of extraction systems 37 A.1 Explanation to figures . 37 A.2 Interface to woodworking machinery. 43 Annex B (informative) Table with corresponding terms in English, French and German 44 Annex C

17、 (informative) Classification of places where explosive atmospheres may occur (according to Directive 1999/92/EC) . 48 Annex D (informative) Noise reduction at the design stage 50 D.1 Noise sources 50 D.2 Measures to reduce noise 50 D.3 Impact from chips and dust 51 Annex E (normative) Silos with a

18、cross section up to 45 m252 Annex F (informative) Measurement of residual dust content . 54 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 55 Bibliography . 58 BS EN 12779:2015EN 12779:2015 (E) 4 European foreword This doc

19、ument (EN 12779:2015) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

20、May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rig

21、hts. This document supersedes EN 12779:2004+A1:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports the basic requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex Z

22、A which is an integral part of this document. The European Standards produced by CEN/TC 142 are particular to woodworking machines and compliment the relevant “A” and “B” standards on the subject of general safety (see Introduction of EN ISO 12100:2010 for a description of A, B and C standards). NOT

23、E Extraction systems as a whole are not intended to be installed in areas, where the presence of potentially explosive atmosphere needs to be taken into account. In relation to the previous version of the standard, the following main modifications have been made: The scope has been adjusted to meet

24、the fields of application of the standard; The requirements for safety related controls have been modified for clarification; The requirements for electrical equipment and installations have been modified for clarification; The requirements for fire and explosion protection have been modified for cl

25、arification; The requirements for noise protection have been modified for clarification; The requirements for protection against hazardous substances have been modified for clarification; The requirements for silos have been modified for clarification; A new annex for examples of extraction systems

26、have been added for clarification; A new annex for the classification of places where explosive atmosphere may occur have been added for clarification. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

27、ean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, BS EN 12779:2015EN 12779:2015 (E) 5 Netherlands, Norway, Polan

28、d, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12779:2015EN 12779:2015 (E) 6 Introduction This standard has been prepared to be a harmonized standard to provide one means of conforming to the Essential Health and Safety Requirements of the

29、Machinery Directive and associated EFTA Regulations. This document is a type “C” standard as defined in EN ISO 12100:2010. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: machine manufacturers (small,

30、 medium and large enterprises); health and safety bodies (regulators, accident prevention organizations, market surveillance etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: machine users/employers (smal

31、l, medium and large enterprises); machine users/employees (e. g. trade unions, organizations for people with special needs); service providers, e.g. for maintenance (small, medium and large enterprises); consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder

32、groups have been given the possibility to participate at the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations and events covered are indicated in the scope of this document. When provisions of this type C standard are different from tho

33、se, which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built in accordance with the provisions of this type C standard. The requirements of this document are directed to ma

34、nufacturers and their authorized representatives of chip and dust extraction systems. This document also includes information to be provided by the manufacturer to the user. BS EN 12779:2015EN 12779:2015 (E) 7 1 Scope This European Standard deals with the significant hazards, hazardous situations an

35、d events relevant for chip and dust extraction systems for fixed installation and for connection with machines for working on solid wood (including hard wood), wood-based materials and wood-like materials, when they are used as intended and under the conditions foreseen by the manufacturer, includin

36、g reasonably foreseeable misuse. This European Standard deals also with the technical requirements to minimize the hazards in connection with the temporary storage of wood dust, chips and shavings in a silo, bin or container including charging and discharge systems. This European standard does not a

37、pply to: a) chip and dust extraction systems with filters installed indoors (covered by prEN 16770); b) extraction equipment (e.g. extraction hoods, ducts) within a woodworking machine including the outlet to which the extraction system is connected; c) chip and dust extraction systems designed for

38、KSTvalues above 200 bar ms1; d) mechanical conveying systems between filter and storage facility; e) extraction systems and conveying systems with underpressure below 0,3 bar or overpressure above 0,3 bar; f) storage devices for pressed wood products (e.g. pellets) and humid shavings. Requirements f

39、or containers are not dealt with in this standard. This European Standard is not applicable to machines which are manufactured before the date of its publication as EN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensa

40、ble for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 617:2001+A1:2010, Continuous handling equipment and systems Safety and EMC requirements for the equipment for th

41、e storage of bulk materials in silos, bunkers, bins and hoppers EN 953:1997+A1:2009, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 1093-7:1998+A1:2008, Safety of machinery Evaluation of the emission of airborne hazardous substances Par

42、t 7: Separation efficiency by mass, ducted outlet EN 1127-1:2011, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 1366-1:2014, Fire resistance tests for service installations Part 1: Ventilation ducts EN 1366-2:2015, Fire resistance tests for servi

43、ce installations Part 2: Fire dampers BS EN 12779:2015EN 12779:2015 (E) 8 EN 1366-7:2004, Fire resistance tests for service installations Part 7: Conveyor systems and their closures EN 1870-4:2012, Safety of woodworking machines Circular sawing machines Part 4: Multiblade rip sawing machines with ma

44、nual loading and/or unloading EN 1991-4:2006, Eurocode 1 Actions on structures Part 4: Silos and tanks EN 12750:2013, Safety of woodworking machines Four sided moulding machines EN 13463-1:2009, Non-electrical equipment for use in potentially explosive atmospheres Part 1: Basic method and requiremen

45、ts EN 14373:2005, Explosion suppression systems EN 14460:2006, Explosion resistant equipment EN 14491:2012, Dust explosion venting protective systems EN 14797:2006, Explosion venting devices EN 14986:2007, Design of fans working in potentially explosive atmospheres EN 15089:2009, Explosion isolation

46、 systems EN 16009:2011, Flameless explosion venting devices EN 16020:2011, Explosion diverters EN 16447:2014, Explosion isolation flap valves EN 60079-14:2014, Explosive atmospheres Part 14: Electrical installations design, selection and erection (IEC 60079-14:2013) EN 60204-1:2006,1)Safety of machi

47、nery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529:1991,2)Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 62305-1:2011, Protection against lightning Part 1: General principles (IEC 62305-1:2010, modified) EN ISO 4414:20

48、10, Pneumatic fluid power General rules and safety requirements for systems and their components (ISO 4414:2010) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of c

49、ontrol systems Part 1: General principles for design (ISO 13849-1:2006) 1) This document is impacted by the stand-alone amendment EN 60204-1:2006/A1:2009. 2) This document is impacted by the stand-alone amendments EN 60529:1991/A1:2000 and EN 60529:1991/A2:2013, and by the corrigendum EN 60529:1991/corrigendum May 1993. BS EN 12779:2015EN 12779:2015 (E) 9 EN ISO 13850:2008, Safety of machinery Emergency stop Principles for design (ISO 13850:2006) EN ISO 14119:2013, Safety of machinery