BS EN 570-2007 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification《铝和铝合金 锻造冲挤金属棒 规范》.pdf

《BS EN 570-2007 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification《铝和铝合金 锻造冲挤金属棒 规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 570-2007 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification《铝和铝合金 锻造冲挤金属棒 规范》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58o

2、btained from wrought products SpecificationICS 77.150.10Aluminium and aluminium alloys Impact extrusion slugs BRITISH STANDARDBS EN 570:2007BS EN 570:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIThis British Standard was published under the a

3、uthority of the Standards Policy and Strategy Committee on 29 February 2008 BSI 2008ISBN 978 0 580 54084 4Amendments/corrigenda issued since publicationDate Commentscontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obliga

4、tions.National forewordThis British Standard is the UK implementation of EN 570:2007. It supersedes BS EN 570:1995 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys.A list of organizations represented on this committ

5、ee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 570January 2007ICS 77.150.10 Supersedes EN 570:1994 English VersionAluminium and aluminium alloys - Impact extrusion slugsob

6、tained from wrought products - SpecificationAluminium et alliages daluminium - Pions de filage parchoc obtenus partir de produits corroys - SpcificationAluminium und Aluminiumlegierungen - Butzen zumFliepressen aus Halbzeug hergestellt - SpezifikationThis European Standard was approved by CEN on 15

7、December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be o

8、btained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Manag

9、ement Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway

10、, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and b

11、y any means reservedworldwide for CEN national Members.Ref. No. EN 570:2007: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Ordering informat

12、ion.5 4.1 General5 4.2 Designation 5 5 Requirements.6 5.1 Tolerances on dimensions and form.6 5.2 Chemical composition 10 5.3 Mechanical properties.10 5.4 Other requirements11 6 Testing 11 6.1 Chemical composition 11 6.2 Brinell hardness.11 6.3 Surface quality .12 7 Sampling rate and test certificat

13、es 12 8 Packaging and marking 12 9 Complaints of non-conformity .12 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 3 Foreword This document (EN 570:2007) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium a

14、lloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2007, and conflicting national standards shall be withdrawn at the latest by July 2007. This

15、 document supersedes EN 570:1994. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 11 “Slugs for impact extrusion“ to revise EN 570:1994. The following technical modifications have been introduced during the revision: Clause 2: References to EN 754-3, EN 754-7, EN

16、 754-8, EN 755-3, EN 755-7 and EN 755-8 added; Clause 4: Text modified; Clause 5: Text in 5.1.1 modified, former Table 2 deleted and replaced by reference to EN 755-3, former Table 4 deleted and replaced by references to EN 755-7 and EN 755-8; Table 6: Materials EN AW-1090, EN AW-1100, EN AW-3003, E

17、N AW-5251, EN AW-6005A and EN AW-6063 added; materials EN AW-5305, EN AW-5505 and EN AW-5110 deleted. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

18、 CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard. According to the CEN/CENELEC Internal Regulations,

19、the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

20、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 4 1 Scope This document specifies the technical conditions for inspection and del

21、ivery, tolerances on dimensions and form and other requirements for flat or preformed wrought aluminium and wrought aluminium alloy slugs for impact extrusion. It applies to slugs produced either by punching of rolled products or by cutting of extruded products. Slugs covered in this document are su

22、itable for the manufacture of impact extruded parts for packaging and indus-trial applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest e

23、dition of the referenced document (including any amendments) applies. EN 573-3, Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition EN 754-3, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 3: Round bars, tolerances on dimensi

24、ons and form EN 754-5, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 5: Rectangular bars, tolerances on dimensions and form EN 754-7, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 7: Seamless tubes, tolerances on dimensions and form EN 754-8, Aluminium and alumini

25、um alloys Cold drawn rod/bar and tube Part 8: Porthole tubes, tolerances on dimensions and form EN 755-3, Aluminium and aluminium alloys Extruded rod/bar, tube and profile Part 3: Round bars; tolerances on dimensions and form EN 755-5, Aluminium and aluminium alloys Extruded rod/bar, tube and profil

26、e Part 5: Rectangular bars, toler-ances on dimensions and form EN 755-7, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 7: Seamless tubes, toler-ances on dimensions and form EN 755-8, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 8: Porthole tubes,

27、toler-ances on dimensions and form EN 10204, Metallic products Types of inspection documents EN ISO 6506-1, Metallic materials Brinell hardness test Part 1: Test method (ISO 6506-1:2005) 3 Terms and definitions For the purposes of this document the following terms and definitions apply. 3.1 slug pie

28、ce of metal of uniform thickness of regular or irregular shape taken from a wrought product, usually for impact extrusion with or without a centre hole 3.2 thickness in slugs punched from rolled products, the thickness is measured perpendicular to the rolling plane, whilst in slugs cut from extruded

29、 products thickness is measured in the extrusion direction Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 5 4 Ordering information 4.1 General The selection of material and of the condition of supply is at the purchasers discretion.

30、 The purchaser should state when ordering the intended use and any further processing envisaged. The order shall describe the slug in the condition of delivery. If preformed slugs are required, the type of preforming shall be given when ordering, together with a drawing speci-fying the details. 4.2

31、Designation 4.2.1 Standard designation The standard designation shall be given in the following order: the designation of product (slug); the number of this European Standard (EN 570); the designation of the aluminium or aluminium alloy, see 5.2; the slug shape, e.g. flat, round with or without hole

32、, rectangular, preformed; dimensions in millimetres; the surface finish, see 5.4.2. 4.2.2 Examples of standard designation 4.2.2.1 Round slug without a centre hole (see Figure 1) Description of product, EN number, material designation, slug shape: round (rd), diameter thickness, surface finish, brig

33、ht (br) e.g.: Slug EN 570 EN AW-1050A rd 24,8 4,2 br or Slug EN 570 EN AW-Al 99,5 rd 24,8 4,2 br Figure 1 Round slug without a centre hole 4.2.2.2 Round slug with a centre hole (see Figure 2) Description of product, EN number, material designation, slug shape: round (rd), diameter thickness hole di-

34、ameter (ch), surface finish blasted (bl), e.g.: Slug EN 570 EN AW-1050A rd 24,8 4,2 8ch bl orSlug EN 570 EN AW-Al 99,5 rd 24,8 4,2 8ch bl Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 6 Figure 2 Round slug with a centre hole 4.2.2.

35、3 Rectangular slug (see Figure 3) Description of product, EN number, material designation, slug shape: rectangular (rect), length width thickness, corner radius (R), e.g. R1 if 1 mm, surface finish tumbled (tu), e.g.: Slug EN 570 EN AW-1050A rect 51 26,5 6,1 R1 tu or Slug EN 570 EN AW-Al 99,5 rect 5

36、1 26,5 6,1 R1 tu Figure 3 Rectangular slug 4.2.3 Designation in order When ordering, the standard designation shall be supplemented by stating the mass (preceding the standard des-ignation). EXAMPLE 4 t of round flat slugs without a centre hole with scoured (sc) surface finish: 4 t Slug EN 570 EN AW

37、-1050A flat, rd 29,8 4 sc or 4 t Slug EN 570 EN AW-Al 99,5 flat, rd 29,8 4 sc 5 Requirements 5.1 Tolerances on dimensions and form 5.1.1 General The requirements for tolerances on dimensions and form for slugs manufactured in a flat or preformed shape are specified in 5.1.2 to 5.1.6. The tolerances

38、specified in Tables 1 to 5 shall apply for slugs after punching or cutting in the bright condition. The tolerances on dimensions for slugs with a roughened surface shall be agreed between supplier and purchaser, as an increase of the outside diameters is to be expected. This increase in dimensions h

39、as to be taken into account by the supplier in his manufacturing process. The increase in dimensions depends on the material used, the mass of the slug and the method of roughing. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 7 Lim

40、its in the manufacture of punched slugs: a) In the case of round slugs, the thickness should not exceed the diameter. b) In the case of rectangular slugs, the thickness should not exceed the width. c) In the case of slugs with a centre hole, the slug thickness should not exceed the hole diameter. If

41、 these limits are exceeded, slugs should be manufactured by cutting. 5.1.2 Slug diameter The tolerances specified in Table 1 for punched round slugs shall apply. For sawn round slugs the tolerances on diameter as specified in EN 755-3 shall apply. If tighter tolerances are needed, this shall be spec

42、ified in the order. In this case tolerances as specified in EN 754-3 shall apply. Table 1 Tolerances on diameter of punched slugs Dimensions in millimetres Slug diameter over up to Tolerancesa 10 0,02 10 40 0,03 40 60 0,04 60 80 0,05 80 120 0,06 120 150 0,08 150 200 0,10 aThe tolerances include the

43、circularity tolerance. 5.1.3 Hole diameter of punched slugs The tolerances specified in Table 2 shall apply only for flat slugs with a hole, with the hole diameter not exceeding 40 % of the slug diameter and the slug thickness not exceeding two thirds of the hole diameter. In all other cases, the to

44、lerances of the hole diameter shall be agreed between supplier and purchaser. Table 2 Tolerances on hole diameter of punched slugs Dimensions in millimetres Hole diameter over up to Tolerances 10 0,05 10 20 0,07 20 0,1 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontro

45、lled Copy, (c) BSIEN 570:2007 (E) 8 The hole eccentricity e shall be determined according to Figure 4 and shall not exceed 0,15 mm. Figure 4 Hole eccentricity The tolerances for the hole diameter include the circularity tolerance. 5.1.4 Diameters and wall thickness of sawn slugs with a hole For sawn

46、 round slugs with a hole, produced from round tubes with or without extrusion seams the tolerances as specified in EN 755-8 or EN 755-7 shall apply. If tighter tolerances are needed for example in accordance with EN 754-7 or EN 754-8 this shall be specified in the order. 5.1.5 Length and width of re

47、ctangular slugs The tolerances specified in Table 3 shall apply to punched rectangular slugs. Table 3 Tolerances on length and width of punched rectangular slugs Dimensions in millimetres Length and width over up to Tolerancesa 10 0,05 10 20 0,08 20 40 0,10 40 60 0,12 60 120 0,14 120 150 0,17 150 20

48、0 0,20 aThe corner radius shall not be less than 1 mm and shall be specified in the order. For sawn rectangular slugs up to 200 mm the tolerances for the cross-section of the bar as specified in EN 755-5 shall apply. If tighter tolerances are needed this shall be specified in the order. In this case

49、 tolerances as specified in EN 754-5 shall apply. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/05/2008 07:59, Uncontrolled Copy, (c) BSIEN 570:2007 (E) 9 5.1.6 Thickness The tolerances specified in Tables 4 and 5 shall apply to the slug thickness. Table 4 Tolerances on thickness of punched slugs Dimensions in millimetres Slug thickness over up to Tol