BS EN 4199-005-2009 Aerospace series - Bonding straps for aircraft - Part 005 Flat braid conductors copper tin plated -65 C up to 150 C and copper nickel plated -65 C up to 260 C -.pdf

《BS EN 4199-005-2009 Aerospace series - Bonding straps for aircraft - Part 005 Flat braid conductors copper tin plated -65 C up to 150 C and copper nickel plated -65 C up to 260 C -.pdf》由会员分享，可在线阅读，更多相关《BS EN 4199-005-2009 Aerospace series - Bonding straps for aircraft - Part 005 Flat braid conductors copper tin plated -65 C up to 150 C and copper nickel plated -65 C up to 260 C -.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN4199-005:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Bonding straps foraircraftPart 005: Flat braid conductors copper,tin plated -65 C up to 150 C andcopper, nickel plated, -65 C up to 260C Product standardThis British Sta

2、ndardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 June2009. BSI 2009ISBN 978 0 580 65953 9Amendments/corrigenda issued since publicationDate CommentsBS EN 4199-005:2009National forewordThis British Standard is the UK implementation of EN 4199-005:2009.The UK pa

3、rticipation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionso

4、f a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 4199-005:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4199-005 June 2009 ICS 49.060 English Version Aerospace series - Bonding straps for

5、aircraft - Part 005: Flat braid conductors copper, tin plated -65 C up to 150 C and copper, nickel plated, -65 C up to 260 C - Product standard Srie arospatiale - Tresses de mtallisation pour avion - Partie 005 : Plat conducteur pour utilisation de - 65 C 150 C en cuivre tam et de - 65 C 260 C en cu

6、ivre nickel - Norme de produit Luft und Raumfahrt - Masseverbinder fr Luftfahrzeuge - Teil 005: Masseband, flache Geflechtsleiter Kupfer, verzinnt - 65 C bis 150 C und Kupfer, vernickelt - 65 C bis 260 C - Produktnorm This European Standard was approved by CEN on 13 March 2009. CEN members are bound

7、 to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN

8、 Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same statu

9、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

10、 Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worl

11、dwide for CEN national Members. Ref. No. EN 4199-005:2009: EBS EN 4199-005:2009EN 4199-005:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Characteristics .4 4.1 Temperature rating 4 4.2 Material and finish .4 5 Dimensions and mass .4 6 Quality ass

12、urance 5 7 Designation 5 8 Marking .5 9 Packaging .6 BS EN 4199-005:2009EN 4199-005:2009 (E) 3 Foreword This document (EN 4199-005:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). This European Standard shall be given the status of a

13、 national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. After enquiries and votes carried out in accordance with the rules of this Association, this Standar

14、d has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be h

15、eld responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finla

16、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4199-005:2009EN 4199-005:2009 (E) 4 1 Scope This standard defines the char

17、acteristics of flat braided conductors copper tin or nickel plated for bonding straps according to EN 4199-001. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referenc

18、es, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2424, Aerospace series Marking of aerospace products. EN 4199-001, Aerospace series Bonding straps for aircraft

19、 Part 001: Technical specification. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4199-001 apply. 4 Characteristics 4.1 Temperature rating Flat braid copper conductors copper / tin plated 65 C to 150 C and copper / nickel plated 65 C to 260 C. 4.2 M

20、aterial and finish Single copper strands 0,10 mm diameter and larger shall be in accordance with EN 2083, and the same material and plating shall be used for strands smaller than 0,10 mm diameter. 5 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1. = angle of braid 10 - 35 Figur

21、e 1 BS EN 4199-005:2009EN 4199-005:2009 (E) 5 Table 1 Braid size code Braid conductor cross section Strand diameter Construction of braid b s Resistance at 20 C under 1 A Mass nom nom nom nom ( 10 %) max. mm2mm mm mm mm /km kg/km A 4 0,071 24 44 0,071 8,2 1,0 4,70 40 B 6 24 66 0,071 10,0 1,3 3,4 63

22、C 10 24 110 0,071 14,0 1,5 2,0 115 D 16 0,10 24 84 0,10 17,5 2,0 1,3 160 E 25 24 132 0,10 21,0 2,4 0,80 262 6 Quality assurance See EN 4199-001. Flexure endurance shall be 1 000 cycles using a mandrel diameter 5s (5 times the nominal braid thickness). A suspended weight shall be applied; the mass to

23、 be sufficient to ensure that the braid remains in contact with the mandrel. As a guide, the mass should be calculated using the formula: Nominal cross sectional area mm2 150 g Dimensions shall include braid angle. 7 Designation EXAMPLE Description block FLAT BRAID CONDUCTOR Identity block EN4199-00

24、5AT Number of this standard Size code (see Table 1) Finish (T = tin plated or N = nickel plated) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 8 Marking The marking of the flat braid conductor by label on reel or packaging shall include: a) t

25、he designation as defined in this product standard b) the date of manufacture c) the manufacturers name or monogram in accordance with EN 2424 style F d) the length BS EN 4199-005:2009EN 4199-005:2009 (E) 6 9 Packaging To be packed on reels as agreed with the purchaser. BS EN 4199-005:2009This page

26、has been intentionally left blank BS EN4199-005:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on stan

27、dards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of ou

28、r products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400

29、.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001.

30、Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requeste

31、d.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Conta

32、ct Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel

33、: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the cop

34、yright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise

35、 without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: