BS EN 3355-2012 Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Extruded section De 150 mm 900 MPa Rm 1160 MPa《航空航天系列 TI-P64001 (Ti-6Al-4V)钛合金 退火 挤压型材 De≤150 mm 900 .pdf

《BS EN 3355-2012 Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Extruded section De 150 mm 900 MPa Rm 1160 MPa《航空航天系列 TI-P64001 (Ti-6Al-4V)钛合金 退火 挤压型材 De≤150 mm 900 .pdf》由会员分享，可在线阅读，更多相关《BS EN 3355-2012 Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Extruded section De 150 mm 900 MPa Rm 1160 MPa《航空航天系列 TI-P64001 (Ti-6Al-4V)钛合金 退火 挤压型材 De≤150 mm 900 .pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 3355:2012Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Extruded section De 150 mm 900 MPa Rm 1 160 MPaBS EN 3355:2012Incorporating corrigendum April 2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 3355:2012 BRITISH STANDARDNational fo

2、rewordThis British Standard is the UK implementation of EN 3355:2012. Together with BS EN 3311:2009, it partially supersedes BS 3TA 11:2009+A1:2017 for the following forms: Round bar, limiting ruling section 110mm. Extruded section, limiting ruling section 150mm.The UK participation in its preparati

3、on was entrusted to Technical Committee ACE/61/-/49, Titanium and its Alloys for Aerospace Purposes.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are res

4、ponsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 98045 9ICS 49.025.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Stan

5、dards Policy and Strategy Committee on 31 March 2012.Amendments/corrigenda issued since publicationDate Text affected30 April 2017 Supersession information updatedBS EN 3355:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3355 March 2012 ICS 49.025.30 English Version Aerospace series - Tita

6、nium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De 150 mm - 900 MPa Rm 1 160 MPa Srie arospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Profils fils - De 150 mm - 900 MPa Rm 1 160 MPa Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglht - Strangpreprofi

7、le - De 150 mm - 900 MPa Rm 1 160 MPa This European Standard was approved by CEN on 24 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U

8、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

9、slation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla

10、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPI

11、SCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3355:2012: EBS EN 3355:2012EN 3355:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Norm

12、ative references 5BS EN 3355:2012EN 3355:2012 (E) 3 Foreword This document (EN 3355:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standar

13、d has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

14、 September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all su

15、ch patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary

16、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3355:2012EN 3355:2012 (E) 4 Introduction This European Standard is part of the series of EN metallic m

17、aterial standards for aerospace applications. The general organization of this series is described in EN 4258. This European Standard has been prepared in accordance with EN 4500-4. BS EN 3355:2012EN 3355:2012 (E) 5 1 Scope This European Standard specifies the requirements relating to: Titanium allo

18、y TI-P64001 (Ti-6Al-4V) Annealed Extruded section De 150 mm 900 MPa Rm 1 160 MPa for aerospace applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edit

19、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2032-2, Aerospace series Metallic materials Part 2: Coding of metallurgical condition in delivery condition EN 4258, Aerospace series Metallic materials General organizatio

20、n of standardization Links between types of EN standards and their use EN 4500-4, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 4: Specific rules for titanium and titanium alloys1 EN 4800-002, Aerospace series Titanium and titanium alloys Technica

21、l specification Part 002: Bar and section 1Published as ASD-STAN Standard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). BS EN 3355:2012EN 3355:2012 (E) 6 1 Material designation Titanium alloy TI-P

22、64001(Ti-6Al-4V) 2 Chemical composition %Element Al V O N O + 2N H Fe C Y Others Ti Each Total min. 5,50 3,50 Base max. 6,75 4,50 0,20 0,03 0,25 0,012 5 0,30 0,08 0,005 0 0,10 0,40 3 Method of melting See EN 4800-002. 4.1 Form Extruded section 4.2 Method of production Extruded ( + or processed) 4.3

23、Limit dimension(s) mm De 150 5 Technical specification EN 4800-002 6.1 Delivery condition Annealed Heat treatment 690 C 840 C / t 30 min AC or cooled in inert atmosphere a6.2 Delivery condition code Ub7 Use condition Delivery conditionHeat treatment Characteristics 8.1 Test sample(s) See EN 4800-002

24、. 8.2 Test piece(s) See EN 4800-002. 8.3 Heat treatment Use condition 9 Dimensions concerned mm De 150 10 Thickness of cladding on each face % 11 Direction of test piece L c12 Temperature C Ambient13 Proof stress Rp0,2MPa 830 14 T Strength RmMPa 900 Rm 1160 15 Elongation A % 8 16 Reduction of area Z

25、 % 20 17 Hardness 18 Shear strength Rc MPa 19 Bending k 20 Impact strength 21 Temperature C 22 Time h 23 Stress a MPa 24 C Elongation a % 25 Rupture stress R MPa 26 Elongation at rupture A % 27 Notes (see line 98) a, b, c BS EN 3355:2012 EN 3355:2012 (E) 7 30 Microstructure See EN 4800-002. 2 Each e

26、xtruded section back end 3 The sample shall represent the full cross section 7 Criteria to be agreed between the manufacturer and the purchaser 44 External defects See EN 4800-002. 1 Visual examination 61 Internal defects See EN 4800-002. 74 Surface contamination See EN 4800-002. 95 Marking inspecti

27、on See EN 4800-002. 96 Dimensional inspection See EN 4800-002. 98 Notes a If after annealing, any straightening or stretching operations are performed on extruded section below 550 C, the extruded section shall be stress relieved by heating to a temperature 550 C 700 C / t 30 min/AC or cooled in ine

28、rt atmosphere. b According to EN 2032-2. c If required, properties for LT direction to be agreed between manufacturer and purchaser. 99 Typical use BS EN 3355:2012 EN 3355:2012 (E) 8 100 Product qualification See EN 4800-002. Qualification programme to be agreed between manufacturer and purchaser. T

29、his page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.Br

30、itish Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and

31、 refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting

32、 our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need in

33、ternational and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or enti

34、ty that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other pe

35、rson. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licen

36、sed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use on

37、ly.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document,

38、 or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription serv

39、ices are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refresh

40、ed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing

41、Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on yo

42、ur intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We contin

43、ually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20