BS EN 2996-004-2006 Aerospace series - Circuit breakers three-pole temperature compensated rated current 1 A to 25 A - Part 004 With signal contact - Product standard《航空航天系列 额定电流1 .pdf

《BS EN 2996-004-2006 Aerospace series - Circuit breakers three-pole temperature compensated rated current 1 A to 25 A - Part 004 With signal contact - Product standard《航空航天系列 额定电流1 .pdf》由会员分享，可在线阅读，更多相关《BS EN 2996-004-2006 Aerospace series - Circuit breakers three-pole temperature compensated rated current 1 A to 25 A - Part 004 With signal contact - Product standard《航空航天系列 额定电流1 .pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 2996-004:2006Aerospace series Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A Part 004: With signal contact Product standardThe European Standard EN 2996-004:2006 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g4

2、4g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 2996-004:2006This British Standard was

3、published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978 0 580 50013 8National forewordThis British Standard was published by BSI. It is the UK implementation of EN 2996-004:2006.The UK participation in its preparation was entrusted by Technica

4、l Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Panel ACE/6/-/5, Aerospace Protection for electrical systems.A list of organizations represented on ACE/6/-/5 can be obtained on request to its secretary.This publication does not purport to include all the necessary prov

5、isions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BS

6、IEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2996-004August 2006ICS 49.060English VersionAerospace series - Circuit breakers, three-pole, temperaturecompensated, rated current 1 A to 25 A - Part 004: With signalcontact - Product standardSrie arospatiale - Disjoncteurs tripolaires compenss ente

7、mprature, intensits nominales 1 A 25 A - Partie 004 :Avec contact de signalisation - Norme de produitLuft- und Raumfahrt - Schutzschalter, dreipolig,Temperaturkompensiert, Nennstrme von 1 A bis 25 A -Teil 004: Mit Signalkontakt - ProduktnormThis European Standard was approved by CEN on 5 June 2006.C

8、EN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on appl

9、ication to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has th

10、e same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,S

11、lovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide

12、 for CEN national Members.Ref. No. EN 2996-004:2006: ELicensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Dimensions and mass.4 4 Characteristics.6 5 Designation 11 6 Rated current code 11 7 Deliver

13、y codes .11 8 Marking .12 9 Technical specification .12 EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI3 Foreword This European Standard (EN 2996-004:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - St

14、andardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard sh

15、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. Attention is drawn to the possibility that some of the elements of this

16、document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa

17、rd: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2996-004

18、:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature bet

19、ween 55 C and 125 C for ratings 15 A and 55 C to 90 C for ratings 15 A and at an altitude of 22 000 m max. These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action “trip-free“ tripping with a signal contact which is open when main contacts are closed,

20、 and inversely. They will continue to function up to the short-circuit current. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the re

21、ferenced document (including any amendments) applies. EN 2996-001, Aerospace series Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A Part 001: Technical specification. EN 3155-016, Aerospace series Electrical contacts used in elements of connection Part 016: Contacts,

22、 electrical, male, type A, crimp, class S Product standard. EN 3841-305, Aerospace series Circuit breakers Test methods Part 305: Short-circuit performance. EN 6113, Aerospace series Circuit breaker, connecting and attachment hardware.1)TR 6083, Aerospace series Cut-outs for installation of electric

23、al components.2)MIL-I-81969/1A, Installing and removal tools, connector electrical contact, type III, class 2, composition C.3)MIL-I-81969/14C, Installing and removal tools, connector electrical contact, type III, class 2, composition B.3)FED-STD-595B, Colors used in Government Procurement. 3 Dimens

24、ions and mass 3.1 Dimensional characteristics The circuit breakers do not have to correspond to the pictorial illustration, only the dimensions given shall be adhered to. Dimensions are in millimetres. See Figure 1. 1) Published as AECMA Prestandard at the date of publication of this standard. 2) Pu

25、blished as AECMA Technical Report at the date of publication of this standard. 3) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI5 Key 1 Push button release

26、d 10 1 to 3 max. 2 Green colour according to FED-STD-595B No. 34090 11 3 White Gauge 20 connection pins according to EN3155-016M2018 4 Marking area, see Clause 8. 12 Indicative value 25 (see note) 5 Circuits deviding partition 13 Rated current marking (white on green) 6 Connecting screw and washer 1

27、4 7 Push button pressed Positioning lug in accordance with the panel cut-out, as per TR6083C202 8 Lockwasher 15 Terminals shape free 9 Attachment nut F1 and F2: see EN 2996-001 “Mechanical tests“. NOTE Tools noted in subclause 4.2.4 shall be applied without interfering with the terminal 2 connection

28、. Even if the circuit breakers are grouped. Figure 1 Configuration Dimensions Tolerances 341,50-0,5234,6 min.50,5 A12439 8,4 0,3C2B2A2C1B1A115,8max.0,5A16,5 max.12,8 0,517,5215 0,8 15 0,80,5 AF2F11530 max.26,5 max.20 max.138 min.10130,5M12 x 13 min.6,350,42,5 0,318,51310,819,5max.3max.6453453A7 min.

29、5 0,536247max.F1 and F2 : see EN 2996-001 table 3A2 B2 C2814 10,2 0,317119,8 max.EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI6 3.2 Electrical diagram See Figure 2. Terminal No.: 1 and 2: Main contacts 3 and 4: Signal contacts Figure 2 El

30、ectrical diagram 3.3 Mass 64 g max. (delivery code A including hardware). 3.4 Panel mounting See EN 2996-001. 4 Characteristics 4.1 Material, surface treatment See EN 2996-001. 4.2 Mechanical characteristics 4.2.1 Fasteners See EN 6113. 4.2.2 Recommended tightening torque of attaching nut for instal

31、lation (4,75 0,25) Nm 4.2.3 Recommended tightening torque of connection hardware for installation (1,6 0,1) Nm A2 A1B2 B1C2 C134Push-button releasedA2 A1B2 B1C2 C134Push-button pressedEN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI7 4.2.4 R

32、ecommended tools for contacts of auxiliary contact insertion and extraction plastic MIL-I-81969/14-11; metallic MIL-I-81969/1-02. 4.2.5 Resistance to vibrations 4.2.5.1 Combined test: ambient temperature at 70 C and vibrations Sinusoidal: 10 gn, see EN 2996-001. Random: 5,8 gn, see EN 2996-001. Low

33、frequencies: 10 gn, see EN 2996-001. 4.2.5.2 Combined test: ambient temperature at 85 C, altitude and vibrations Sinusoidal: 3 gn, see EN 2996-001. 4.2.6 Resistance to shocks 50 gn, see EN 2996-001. 4.2.7 Mechanical endurance See Table 6. 4.3 Environment characteristics 4.3.1 Humidity See EN 2996-00

34、1. 4.3.2 Corrosion See EN 2996-001. 4.3.3 Contaminating liquids See EN 2996-001. 4.3.4 Overvoltage caused by lightning See EN 2996-001. 4.4 Electrical characteristics 4.4.1 Nominal voltages of main contacts See Table 1. Table 1 Nominal voltage 115/200 V a.c., 360 Hz to 800 Hz EN 2996-004:2006License

35、d Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI8 4.4.2 Voltage drop at nand at low current See Table 2. Table 2 Ratings A 1 2 2,5 3 5 7,5 10 15 20 25 U max. at n V 1,1 0,75 0,70 0,55 0,35 0,30 0,30 0,25 0,25 0,20 U max. at = 100mA mV 110 40 30 18 8 4 3 2,5 2,5 2,

36、5 Signal circuit: 28 V d.c.; I = 3 mA : U 0,3 mV. NOTE When a signal contact has been operated with a power greater than 60 mW and/or with a voltage higher than 28 V d.c., it loses its low current quality. 4.4.3 Minimum and maximum tripping thresholds See Table 3. Table 3 Overload (in % of n) Minimu

37、m thresholds value 1 h Maximum thresholds value 1 h Ambient temperatures C Ratings On ground At 22 000 m On ground 23 5 110 105 140 55 5 115 105 160 70 5 All 105 100 140 90 5 20 and 25 90 80 140 125 5 1 to 15 100 80 140 NOTE 1 For detection of minimum threshold, all the poles are connected in series

38、. NOTE 2 For detection of maximum threshold, load value is: - increased by about 20 % when one pole is submitted to the load and other poles are not loaded; - increased by about 10 % when two poles are submitted to the load and the other one is not loaded; - not increased when the two other poles ar

39、e loaded at 0,9 n. EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI9 4.4.4 Overload trip See Table 4. Table 4 Overload (in % of n) 200 500 1 000 3 poles 1 pole 3 poles 1 pole 3 poles 1 pole Ambient temperatures C Ratings A Trip time s 23 5 2

40、 to 20 55 5 All 40 48 90 5 20 and 25 1,5 1,5 125 5 1 to 15 1,5 1,5 0,15 to 2,30 0,15 to 2,80 0,035 to 0,500 0,035 to 0,600 NOTE 1 When 3 poles are loaded, they will be connected in series. NOTE 2 When 1 pole is loaded, the two other poles are not loaded. 4.4.5 Short-circuit values See Table 5. Table

41、 5 Nominal voltage 115 / 200 V a.c., 360 Hz to 800 Hz 0,8 cos 1 Prospective currents 65 nor 1 000 A r.m.s. (value the most favourable) Test altitudes On the ground and at maximum altitude 22 000 m (4 000 Pa) Number of operations 1 CO a+ 2 OCO b+ 1 CO + 2 OCO aBreak operation (for definition refer to

42、 EN 3841-305). bMake operation (for definition refer to EN 3841-305). 4.4.6 No-load and load endurance See Table 6. EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI10 Table 6 Number of operations to be provided No-load Load 5 000 2 500 Main

43、contacts Applicable Inductive 0,6 cos 0,7 n, 115 / 200 V a.c. - 360 Hz to 800 Hz All ratings Signal contacts Applicable Resistive 0,5 A, 28 V d.c. Resistive 3 mA, 28 V d.cResistive 3 mA, 5 V d.cLamp 0,2 A, 28 V d.c. Lamp 0,23 A, 5 V a.c.NOTE 1 One operation corresponds to one closing + one opening.

44、NOTE 2 Tolerances 5 % on current, voltage and frequency values. 4.4.7 Dielectric rigidity See Table 7. Table 7 Closed position Z = 0 m Z = 22 000 m A1, B1, C1 with attachment A1, B1, C1 with 3 A1, B1, C1 with 4 A1, A2 with B1, B2 and C1, C2 B1, B2 with A1, A2 and C1, C2 1 500 V 400 V 3 with 4 3 and

45、4 with attachment 500 V 150 V Open position Z = 0 m Z = 22 000 m 1 with 2 A1, B1, C1, A2, B2, C2 with attachment 3 and 4 with A1, B1, C1 3 and 4 with A2, B2, C2 A1, A2 with B1, B2 and C1, C2 B1, B2 with A1, A2 and C1, C2 1 500 V 400 V 3 and 4 with attachment 500 V 150 V 4.4.8 Insulation resistance A

46、ccording to EN 2996-001, Table 5. EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI11 5 Designation EXAMPLE Description block CIRCUIT BREAKER Identity block EN2996-004A20AA Number of EN standard Design code, A: green button Rated current code

47、 (see Table 8) Delivery code A (see Table 9) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Rated current code See Table 8. Table 8 Rating current n (A) 1 2 2,5 3 5 7,5 10 15 20 25 Marking on actuator 1 2 2 3 5 7 10 15 20 25 Rated current co

48、de 01A 02A 2A5 03A 05A 7A5 10A 15A 20A 25A 7 Delivery codes See Table 9. Table 9 Connection and attachment hardware kits EN 6113 Delivery conditions Delivery code Kit part-No. aIncluded parts Pieces per part Fitted Supplied separately Connecting screw 6 Connecting lockwasher 6 Attachment nut 1 A EN6

49、113C1 Attachment lockwasher 1 X Attachment nut 1 B EN6113B1 Attachment lockwasher 1 X aSpare parts could be ordered separately, for information see EN 6113. EN 2996-004:2006Licensed Copy: Wang Bin, na, Thu Apr 05 02:53:51 GMT+00:00 2007, Uncontrolled Copy, (c) BSI12 8 Marking As defined on the drawing and unless otherwise specified by contract, marking shall include: the designation defined in Clause 5 (without delivery