BS EN 1459-3-2015 Rough-terrain trucks Safety requirements and verification Interface between the variable-reach truck and the work platform《崎岖地形卡车 安全要求和验证 伸缩臂式卡车和工作平台之间的接口》.pdf
《BS EN 1459-3-2015 Rough-terrain trucks Safety requirements and verification Interface between the variable-reach truck and the work platform《崎岖地形卡车 安全要求和验证 伸缩臂式卡车和工作平台之间的接口》.pdf》由会员分享,可在线阅读,更多相关《BS EN 1459-3-2015 Rough-terrain trucks Safety requirements and verification Interface between the variable-reach truck and the work platform《崎岖地形卡车 安全要求和验证 伸缩臂式卡车和工作平台之间的接口》.pdf(16页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationBS EN 1459-3:2015Rough-terrain trucks Safetyrequirements and verificationPart 3: Interface between the variable-reachtruck and the work platformBS EN 1459-3:2015Incorporating corrigendum June 2015BS EN 1459-3:2015 BRITISH STANDARDNational forewordThis British Standard is the
2、 UK implementation of EN 1459-3:2015.The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary
3、provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 90618 3ICS 53.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publi
4、shed under the authority of the Standards Policy and Strategy Committee on 31 May 2015.Amendments/corrigenda issued since publicationDate Text affected30 June 2015 Supersession statement in national foreword removedEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM EN 1459-3 May 2015 ICS 53.060 English
5、 Version Rough-terrain trucks - Safety requirements and verification - Part3: Interface between the variable-reach truck and the workplatform Chariots tout-terrain - Prescriptions de scurit etvrification - Partie 3 : Interface entre le chariot portevariable et la plateforme de travail Gelndegngige S
6、tapler - Sicherheitsanforderungen undVerifizierung - Teil 3: Zustzliche Anforderungen fr Staplermit vernderlicher Reichweite ausgerstet mit ArbeitsbhneThis European Standard was approved by CEN on 16 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat
7、e the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standa
8、rd exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the samestatus as the official versions. CEN members are the nationa
9、l standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia
10、, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means rese
11、rvedworldwide for CEN national Members. Ref. No. EN 1459-3:2015 EBS EN 1459-3:2015EN 1459-3:2015 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Safety requirements 6 4.1 General 6 4.2 Locking of the work platform .6 4.3 Dismounting of t
12、he work platform from the truck 6 4.4 Cables and connections .7 4.5 Mechanical locking device 7 4.6 Safety related functions 7 5 Verification .7 6 Information for use 8 6.1 General 8 6.2 Instruction handbook 8 6.2.1 General 8 6.2.2 Operating and maintenance instructions 8 6.3 Marking .9 Annex A (inf
13、ormative) List of significant hazards . 10 A.1 General . 10 Bibliography . 11 BS EN 1459-3:2015EN 1459-3:2015 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Safety requirements 6 4.1 General 6 4.2 Locking of the work platform .6 4.3 Dis
14、mounting of the work platform from the truck 6 4.4 Cables and connections .7 4.5 Mechanical locking device 7 4.6 Safety related functions 7 5 Verification .7 6 Information for use 8 6.1 General 8 6.2 Instruction handbook 8 6.2.1 General 8 6.2.2 Operating and maintenance instructions 8 6.3 Marking .9
15、 Annex A (informative) List of significant hazards . 10 A.1 General . 10 Bibliography . 11 BS EN 1459-3:2015EN 1459-3:2015 (E) 3 Foreword This document (EN 1459-3:2015) has been prepared by Technical Committee CEN/TC 150 “Industrial trucks - Safety”, the secretariat of which is held by BSI. This Eur
16、opean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the
17、elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. The purpose of this standard is to give requirements for the specific aspects related to the fitting and interface of a work platform to a va
18、riable-reach truck designed for the lifting of persons. This standard does not give requirements for the complete truck fitted with a work platform. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Trucks which are equip
19、ped with work platforms as interchangeable equipment are regarded as Mobile Elevating Work Platforms (MEWPs) as defined in 3.1 of EN 280:2013, and listed under Annex IV, item 17 of the Machinery Directive 2006/42/EC. EN 1459 consists of the following parts, under the general title Rough-terrain truc
20、ks Safety requirements and verification: Part 1: Variable-reach trucks Part 2: Slewing variable-reach trucks Part 3: Interface between the variable-reach truck and the work platform Part 4: Additional requirements for variable reach trucks handling suspended loads Part 5: Additional requirements for
21、 attachments and attachment interface Part 6: Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain trucks (CEN/TR) Part 7: Test method and determination of noise emission According to the CEN/CENELEC Internal Regulations, the national standards organisations of the f
22、ollowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland
23、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1459-3:2015EN 1459-3:2015 (E) 4 Introduction This document is a type-C standard as stated in EN ISO 12100. The machines concerned and the extent to which hazards, hazardous situ
24、ations or hazardous events are covered as indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for m
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN145932015ROUGHTERRAINTRUCKSSAFETYREQUIREMENTSANDVERIFICATIONINTERFACEBETWEENTHEVARIABLEREACHTRUCKANDTHEWORKPLATFORM
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-549019.html