BS EN 1387-1997 Machine readable cards - Health care applications - Cards - General characteristics《机读卡 保健申请卡的一般特征要求》.pdf

《BS EN 1387-1997 Machine readable cards - Health care applications - Cards - General characteristics《机读卡 保健申请卡的一般特征要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 1387-1997 Machine readable cards - Health care applications - Cards - General characteristics《机读卡 保健申请卡的一般特征要求》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1387 : 1997 The Eur

2、opean Standard EN 1387 : 1996 has the status of a British Standard ICS 11.020; 24.240.15 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Machine readable cards Health care applications Cards: General characteristicsBS EN 1387 : 1997 This British Standard, having been prepared

3、under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 April 1997 BSI 1997 The following BSI references relate to the work on this Standard: Committee reference IST/17 Draft for comment 94/643779 DC ISBN 0 580 27053 X Amendments is

4、sued since publication Amd. No. Date Text affected Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/17, Identification cards and related devices, upon which the following bodies were represented: APACS (Barclaycard) AP

5、ACS (Co-operative Bank) APACS (Lloyds Bank) APACS (Midland Bank) APACS (Nat West Bank) Association for Payment Clearing Services (APACS) BT Laboratories Cellnet Consumer Policy Committee of BSI Electricity Association GPT Card Technology HMSO Mondex International Motorola Ltd. Rochford Thompson Equi

6、pment Shell UK Thorn Transit Systems International Vodafone Ltd. Westinghouse Cubic Ltd.BS EN 1387 : 1997 BSI 1997 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 1387 3ii BSI 1997 BS EN 1387 : 1997 National foreword This British Standard has been

7、 prepared by Technical Committee IST/17 and is the English language version of EN 1387 : 1996 Machine readable cards Health care applications Cards : General characteristics published by the European Committee for Standardization (CEN). This British Standard is published under the direction of the D

8、ISC Board whose Technical Committee IST/17 has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European

9、 developments and promulgate them in the UK. NOTE. International and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London, W4 4AL. Compliance with a British Standard does not of itself confer immunity from legal obligations. Sum

10、mary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 8, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue

11、de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN 1387 : 1996 E EUROPEAN STANDARD EN 1387 NORME EUROPE ENNE EUROPA ISCHE NORM August 1996 ICS 35.240.60 Descriptors: Social welfare, identification cards, IC cards, physical properties, data recording, information inter

12、change English version Machine readable cards Health care applications Cards: General characteristics Cartes lisibles par machine Applications pour la sante Cartes: Caracte ristiques ge ne rales Maschinenlesbare Karten Anwendungen im Gesundheitwesen Karten: Allgemeine Eigenschaften This European Sta

13、ndard was approved by CEN on 1996-06-13. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning suc

14、h national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

15、and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Unite

16、d Kingdom.Page 2 EN 1387 : 1996 BSI 1997 Foreword This European Standard has been prepared by the Technical Committee CEN/TC 224, Machine readable cards, related device interfaces and operations, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a nationa

17、l standard, either by publication of an identical text or by endorsement, at the latest by February 1997, and conflicting national standards shall be withdrawn at the latest by February 1997. In accordance with the CEN/CENELEC Internal Regulations, the following countries are bound to implement this

18、 European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Contents Page Foreword 2 Introduction 2 1 Scope 3 2 Normative references 3 3 Definitions 3 4 Abbreviatio

19、ns 4 5 Physical characteristics 4 6 Recording techniques 4 6.1 Embossing, engraving, printing 4 6.1.1 Technical specification 4 6.1.2 Organization and location of the visually readable data 4 6.1.2.1 L1 and L2 4 6.1.2.2 L3, L4 and L5 4 6.2 Integrated circuits 4 6.2.1 Technical specification 4 6.2.2

20、IC contact area 4 6.3 Photograph 4 6.3.1 Technical specification 4 6.3.2 Photograph area 4 6.4 Bar codes 4 6.4.1 Technical specification 4 6.4.2 Bar codes area 4 Page 6.5 Magnetic stripe 5 6.5.1 Technical specification 5 6.5.2 Magnetic stripe area 5 6.6 Signature panel 5 6.7 High density storage tec

21、hniques 5 Annex A (informative) Possible locations of technologies on health care cards 6 Annex B (normative) Luhn formula for computing modulus 10 double-add-double check digit 7 Introduction This European Standard is one of a series of standards describing the characteristics of machine readable c

22、ards in the health care sector and the use of such cards for European interchange. Other card technologies could be taken into account in the future. Users can select from the technologies described in this standard to organize and store health care data in the card and to meet the security needs an

23、d functions of the card system.Page 3 EN 1387 : 1996 BSI 1997 1 Scope This European Standard specifies directly or by reference the requirements for cards used for health care, health care coverage or health care entitlement. This European Standard specifies the physical characteristics of cards and

24、 the recording techniques, but not the security requirements. It defines the area on each side of the surface of the card allocated to each type of media. Test methods applying to this European Standard are as defined in ISO/IEC 10373. 2 Normative references This European Standard incorporates by da

25、ted or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard

26、 only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 23166 Codes for the representation of names of countries (ISO 3166:1993) EN 27810 Identification cards Physical characteristics (ISO 7810:1985, ed.1) EN 27811-

27、1 Identification cards Recording technique Part 1 : Embossing (ISO 7811-1 : 1985, ed.1) EN 27811-2 Identification cards Recording technique Part 2 : Magnetic stripe (ISO 7811-2:1988, ed.1) EN 27811-3 Identification cards Recording technique Part 3 : Location of embossed characters on ID-1 cards (ISO

28、 7811-3:1985, ed.1) EN 27811-4 Identification cards Recording technique Part 4 : Location of read-only magnetic tracks Tracks 1 and 2 (ISO 7811-4:1985, ed.1) EN 27811-5 Identification cards Recording technique Part 5 : Location of read-write magnetic track Track 3 (ISO 7811-5:1985, ed.1) EN 27816-1

29、Identification cards Integrated circuit(s) with contacts Part 1 : Physical characteristics (ISO 7816-1:1987, ed.1) EN 27816-2 Identification cards Integrated circuit(s) with contacts Part 2 : Dimensions and location of the contacts (ISO 7816-2:1988, ed.1) EN 27816-3 Identification cards Integrated c

30、ircuit(s) cards with contacts Part 3 : Electronic signals and transmission protocols (ISO/IEC 7816-3:1989, edition 1) EN 27816-3 : 1992/A1:1993 Identification cards Integrated circuit(s) cards with contacts Part 3 : Electronic signals and transmission protocols Amendment 1 : Protocol type T=1, async

31、hronous half duplex block transmission protocol (ISO/IEC 7816-3:1989, Amendment 1:1992) ISO 8859-1 Information processing 8-bit single-byte coded graphic character sets Part 1 : Latin alphabet No. 1 ISO/IEC 10373 Identification cards Test methods ISO/IEC 11693 Identification cards Optical memory car

32、ds General characteristics ISO/IEC 11694-1 Identification cards Optical memory cards Linear recording method Part 1 : Physical characteristics ISO/IEC 11694-2 Identification cards Optical memory cards Linear recording method Part 2 : Dimensions and location of the accessible optical area ISO/IEC 116

33、94-3 Identification cards Optical memory cards Linear recording method Part 3 : Optical properties and characteristics 3 Definitions For the purposes of this standard, the following definitions apply: 3.1 health care card Personal portable record included in a card containing administrative and/or m

34、edical data to facilitate health care. 3.2 front side of the card Face of the card carrying visual information containing numbers identifying the card and the card holder. 3.3 back side of the card The opposite face from the front.Page 4 EN 1387 : 1996 BSI 1997 4 Abbreviations IC Integrated circuit

35、5 Physical characteristics The physical characteristics shall conform to EN 27810 and EN 27816-1. 6 Recording techniques This European Standard refers to several different recording techniques. Depending on the particular combination of techniques chosen there may be conflicts in implementing them i

36、n one card. It is the responsibility of card issuers to detect and resolve any such conflicts within the standards concerned. 6.1 Embossing, engraving, printing 6.1.1 Technical specification If embossing is used it shall be as specified in EN 27811-1 and EN 27811-3. 6.1.2 Organization and location o

37、f the visually readable data NOTE. The visually readable information consist of 5 lines referred to as L1, L2, L3, L4 and L5, as given in table 1. 6.1.2.1 L1 and L2 L1 and L2 shall be included on all cards and shall be located on the front side of the card (see 3.2). If embossed, they shall comply w

38、ith EN 27811-3. If not embossed (printed, engraved etc.) their location and the size of their contents are at the discretion of the issuer. L1 is made up of the following components: the industry identifier (2 characters); the country code, as defined in EN 23166 (3 characters); the issuer identifie

39、r (5 characters); the check digit (1 digit), calculated on all preceeding characters using the Luhn modulus 10 formula (see annex B). Spaces, if used, shall separate the above components. L2, the card holder identification number, consists of up to 27 characters. This string of characters shall repr

40、esent a cardholder identifier provided by the card issuer. 6.1.2.2 L3, L4 and L5 The use of lines L3, L4 and L5 is at the discretion of the issuer but if these lines are used for the name of the card holder the following rules should be followed: a) the name shall be the first data to appear after L

41、2 ; b) the name can appear on one or several lines with the most significant part (usually the surname) coming first, followed by the least significant part (usually the given names). If there is ambiguity in separation between the two parts, only a separator in the form of a forward oblique (/) may

42、 be introduced. If not embossed (printed, engraved etc.), their location and their size are at the discretion of the issuer. Table 1. Organization of the visually readable data Line Data name Length Character set L1 Card issuer identifier 11 characters Decimal characters and spaces only L2 Card hold

43、er identification number Up to 27 characters Latin alphabet n 1 1) L3 Reserved for issuer Not specified Not specified L4 Reserved for issuer Not specified Not specified L5 Reserved for issuer Not specified Specified 1) As defined in ISO 8859-1. 6.2 Integrated circuit(s) 6.2.1 Technical specification

44、 The communication protocol of the IC card shall be the asynchronous half duplex character protocol (T = 0) or the block protocol (T = 1) as defined in EN 27816-3 and EN 27816-3:1992/A 1: 1993. 6.2.2 IC contact area If used, dimension and position of contacts shall conform to EN 27816-2. For engrave

45、d and printed cards it may be on either side of the card. 6.3 Photograph 6.3.1 Technical specification The recording technique as well as the size of the photograph shall be compatible with the other technologies implemented on the card. 6.3.2 Photograph area If used, the photograph shall be located

46、 on the upper right corner of the front side of the card. 6.4 Bar codes 6.4.1 Technical specification The recording techniques as well as the size of the bar codes shall be compatible with the other technologies implemented on the card. 6.4.2 Bar codes area If used it is recommended that the bar cod

47、es be located on the upper left corner of the front side of the card.Page 5 EN 1387 : 1996 BSI 1997 6.5 Magnetic stripe 6.5.1 Technical specification The magnetic stripe shall conform to EN 27811-2, EN 27811-4 and EN 27811-5. 6.5.2 Magnetic stripe area If used, the magnetic stripe area shall be loca

48、ted on the back side of the card as specified in EN 27811-2, EN 27811-4 and EN 27811-5. 6.6 Signature panel If used, a signature panel for a handwritten signature shall be located on the back side of the card below the magnetic stripe area. If a reproduced signature image is used, it should be locat

49、ed on the upper front to the left of the photograph area, or alternatively on the back side of the card below the magnetic stripe area. 6.7 High density storage techniques If used, high density storage media shall be located on the back side of the card and conform to the relevant International Standards: ISO/IEC 11693, ISO/IEC 11694-1, ISO/IEC 11694-2 and ISO/IEC 11694-3.Page 6 EN 1387 : 1996 BSI 1997 Figure A.1. Possible locations of technologies on