BS EN 113-1997 Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values《木材防腐剂 对损害木材的.pdf

《BS EN 113-1997 Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values《木材防腐剂 对损害木材的.pdf》由会员分享，可在线阅读，更多相关《BS EN 113-1997 Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values《木材防腐剂 对损害木材的.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 113:1997 Incorporating Amendments Nos.1 and 2 Wood preservatives Test method for determining the protective effectiveness against wood destroying basidiomycetes Determination of the toxic values The European Standard EN 113:1996, with the incorporation of amendment A1:2004, ha

2、s the status of a British Standard ICS 71.100.50 BS EN 113:1997 This British Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and comes into effect on 15 June 1997 BSI 7 April 2004 The

3、following BSI references relate to the work on this British Standard: Committee reference B/515 Draft for comment 90/50379 DC ISBN 0 580 27324 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee B/515, Wood preservation, up

4、on which the following bodies were represented: British Telecommunications plc British Wood Preserving and Damp-proofing Association Chemical Industries Association Creosote Council Department of the Environment (Building Research Establishment) Timber Research and Development Association Timber Tra

5、de Federation Wood Panel Industries Federation The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of Consulting Scientists Council of the Forest Industries of British Columbia Imperial College of Science and Technology Institute

6、of Wood Science Amendments issued since publication Amd. No. Date Comments 13688 15 July 2002 See national foreword 15006 7 April 2004 See national forewordBS EN 113:1997 BSI 7 April 2004 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 113 3BS EN

7、113:1997 ii BSI 7 April 2004 National foreword This British Standard has been prepared by Technical Committee B/515 and is the English language version of EN 113:1996, Wood preservatives Test method for determining the protective effectiveness against wood destroying basidiomycetes Determination of

8、the toxic values, including amendment A1:2004, published by the European Committee for Standardization (CEN). EN 113:1996 was prepared as a result of discussion in CEN Technical Committee 38, Durability of wood and wood-based products, in which the United Kingdom participated. This British Standard

9、supersedes BS 6009:1982 which is withdrawn. This British Standard differed slightly from the English language version of EN 113:1996 when it was originally published. Amendment No. 1 removed these changes to ensure that the text was identical to the English language version of EN 113:1996. Amendment

10、 No. 2 implements CEN amendment A1. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to CEN carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. Cross-references The Britis

11、h Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Onlin

12、e. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an insi

13、de front cover, pages i and ii, the EN title page, pages 2 to 23 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 113 September 1996 + A1 January 2004 ICS 71.100.50 Supersedes EN 113

14、:1980, EN 113:1980/A1:1981 and EN 113:1980/A2:1985 Descriptors: Wood, wood preservatives, pest control, fungi, basidiomycetes, laboratory tests, effectiveness, effectiveness limit English version Wood preservatives Test method for determining the protective effectiveness against wood destroying basi

15、diomycetes Determination of the toxic values (includes amendment A1:2004) Produits de prservation du bois Mthode dessai pour dterminer lefficacit protectrice vis-vis des champignons basidiomyctes lignivores Dtermination du seuil defficacit (inclut lamendement A1:2004) Holzschutzmittel Prfverfahren z

16、ur Bestimmung der vorbeugenden Wirksamkeit gegen holzzerstrende Basidiomyceten Bestimmung der Grenze der Wirksamkeit (enthlt nderung A1:2004) This European Standard was approved by CEN on 1996-09-02, and amendment A1 was approved by CEN on 2003-11-28. CEN members are bound to comply with the CEN/CEN

17、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any

18、CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN

19、 members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland an

20、d United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members. Ref. No. EN 113:1996 + A1:2004 EEN 113:1996 BSI 7 April 2004 2 Foreword This Eur

21、opean Standard has been prepared by Technical Committee CEN/TC 38, Durability of wood and derived materials, the Secretariat of which is held by AFNOR. This European Standard supersedes EN 113:1980, EN 113:1980/A1:1981 and EN 113:1980/A2:1985. The significant technical differences between this editi

22、on and EN 113:1980 are as follows: application to water-dispersible formulations; the use of only one fungus but Coriolus versicolor being only used for particular hazards; the taking into account of the correction value for the loss in mass; new criteria of validity of test and interpretation of re

23、sults; complement to annex regarding test fungi. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 1997, and conflicting national standards shall be withdrawn at the latest by March 1997. Acco

24、rding to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden

25、, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 113:1996/A1:2004) has been prepared by Technical Committee CEN/TC 38, Durability of wood and derived materials, the Secretariat of which is held by AFNOR. This Amendment to the European Standard EN 113:1996 shall be giv

26、en the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2004 and conflicting national standards shall be withdrawn at the latest by July 2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of

27、the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spai

28、n, Sweden, Switzerland and United Kingdom. Contents Page Foreword 2 Introduction 3 1S c o p e 3 2 Normative reference 3 3 Definitions 3 4P r i n c i p l e 4 5 Test materials and apparatus 4 6 Sampling of the preservative 6 7 Test specimens 6 8 Procedure 7 9S t a t e m e n t o f r e s u l t s 1 0 10

29、Test report 11 Annex A (informative) Example of a test report 12 Annex B (normative) Methods of sterilization 15 Annex C (informative) Culture vessels 17 Annex D (normative) Test fungi 20 Annex E (informative) Recommended but non-comprehensive list of optional fungi 22 Annex F (informative) Bibliogr

30、aphy 23 Figure C.1 Kolle flask 17 Figure C.2 Alternative type of test vessel 18 Figure C.3 Alternative type of test vessel 19 Table A.1 Calculation of correction values C for wood preservative Z (organic) Scots pine sapwood 13 Table A.2 Summary of results (Coniophora puteana BAM Ebw. 15) for wood pr

31、eservative Z (organic) Scots pine sapwood 14 Table A.3 Summary of toxic values for preservative Z (organic) in xylene 15EN 113:1996 BSI 7 April 2004 3 Introduction This European Standard specifies a laboratory method of test which gives a basis for the assessment of the effectiveness of a wood prese

32、rvative against wood destroying basidiomycetes. By using this method it is possible to determine the loading at which impregnated wood of a susceptible species may be regarded as adequately protected under the conditions of test. This laboratory method provides one criterion by which the value of a

33、product can be assessed, and this criterion should be used to judge the value of the preservative taking into account the methods of application likely to be used. The procedures described in this standard method are intended to be carried out by suitably trained and/or supervised specialists. Appro

34、priate safety precautions should be observed throughout the use of the standard. Any deviation, however small, from the procedures given in this standard can influence the results, so it is important that the procedures given in this method are followed precisely. 1 Scope This European Standard spec

35、ifies a method for determining the toxic values of wood preservatives previously introduced into the wood by full impregnation against wood destroying basidiomycetes cultured on an agar medium. This method is applicable to products which are capable of achieving uniform and complete penetration of t

36、he test specimens including: water-insoluble chemicals which are being studied as active ingredients; or organic water-insoluble formulations, as supplied or as prepared in the laboratory by dilution of concentrates; or organic water-dispersible formulations as supplied or as prepared in the laborat

37、ory by dilution of concentrates which are capable of achieving uniform and complete penetration of test specimens (see Clause 7) by the procedure described in 8.2.2; or water-soluble products, for example salts. NOTE This method may be used in conjunction with an ageing procedure, for example EN 73.

38、 2 Normative reference This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisi

39、ons of any of these publications apply to this European Standard only when incorporated in it by amendment or revisions. For undated references the latest edition of the publication referred to applies. ISO 3696:1987, Water for analytical laboratory use Specification and test methods. 3 Definitions

40、For the purposes of this standard, the following definitions apply: 3.1 representative sample a sample having its physical or chemical characteristics identical to the volumetric average characteristics of the total volume being sampled 3.2 supplier the sponsor of the testEN 113:1996 4 BSI 7 April 2

41、004 4 Principle Impregnation of several series of test specimens of a susceptible wood species with solutions in which the concentrations of preservative are ranged in a given progression. Exposure of these test specimens to attack by basidiomycetes in pure culture to establish the toxic values of t

42、he product under test. 5 Test materials and apparatus 5.1 Biological material The test fungi to be used as follows: 5.1.1 Obligatory fungus in all cases (see also Annex D) Coniophora puteana (Schumacher ex Fries) Karsten (BAM Ebw.15) on softwood. Loss in mass in percentage in 16 weeks of Scots pine

43、sapwood specimens: minimum 20 % (m/m). 5.1.2 Obligatory fungus for particular hazards (see also Annex D) Coriolus versicolor (Linnaeus) Qulet (CTB 863 A) on hardwood and/or on softwood, as appropriate. Loss in mass in percentage in 16 weeks of beech specimens: minimum 20 % (m/m); of Scots pine sapwo

44、od specimens: minimum 15 % (m/m). 5.1.3 Two species to be used compulsorily on the basis of the nature of the product (see also Annex D) For creosotes and similar products: Lentinus lepideus Fries ex Fries (BAM Ebw. 20) on softwood. Loss in mass in percentage in 16 weeks of Scots pine sapwood specim

45、ens: minimum 20 % (m/m); Lentinus cyathiformis (Schaeffer ex Fries) Bresadola (CTB 67-02 B) on hardwood. Loss in mass in percentage in 16 weeks of beech specimens: minimum 20 % (m/m). For all other products: Poria placenta (Fries) Cooke sensu J. Eriksson (FPRL 280) on softwood. Loss in mass in perce

46、ntage in 16 weeks of Scots pine sapwood specimens: minimum 20 % (m/m); Gloeophyllum trabeum (Persoon ex Fries) Murrill (BAM Ebw. 109) on softwood. Loss in mass in percentage in 16 weeks of Scots pine sapwood specimens: minimum 20 % (m/m). 5.1.4 For specific regional uses or conditions, it is also po

47、ssible to select other fungi on an optional basis 1) . 5.1.5 Maintenance of strains. The strains shall be maintained and treated (that is frequency of subculturing, alternation of culture media, etc.) in accordance with the instructions from their laboratory of origin (see Annex D.2). The parent str

48、ain shall be maintained in the laboratory of its origin such that its vigour is conserved and assured. 5.2 Products and reagents 5.2.1 Culture medium The culture medium is a malt agar medium with the following composition: malt extract in concentrated form: (50 0,5) g, in powder form: (40 0,5) g; ag

49、ar causing no inhibition of growth of fungi: (20 0,5) g to (30 0,5) g; water conforming to grade 3 of ISO 3696; quantity to make up to 1 000 ml. Prepare this medium by warming the mixture in a boiling water bath or a steam bath, stirring until completely dissolved. 1) See Annex E for a recommended but non-comprehensive list of optional fungi.EN 113:1996 BSI 7 April 2004 5 Place in each culture vessel a s