BS EN 1092-3-2003 Flanges and their joints - Circular flanges for pipes valves fittings and accessories PN designated - Part 3 Copper alloy flanges《法兰及其连接件 标注PN的管道、阀门、配件和附件用圆形法兰 铜合.pdf

《BS EN 1092-3-2003 Flanges and their joints - Circular flanges for pipes valves fittings and accessories PN designated - Part 3 Copper alloy flanges《法兰及其连接件 标注PN的管道、阀门、配件和附件用圆形法兰 铜合.pdf》由会员分享，可在线阅读，更多相关《BS EN 1092-3-2003 Flanges and their joints - Circular flanges for pipes valves fittings and accessories PN designated - Part 3 Copper alloy flanges《法兰及其连接件 标注PN的管道、阀门、配件和附件用圆形法兰 铜合.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 1092-3:2003 Incorporating Corrigendum No. 1 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 3: Copper

2、 alloy flanges The European Standard EN 1092-3:2003 has the status of a British Standard ICS 23.040.60 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIBS EN 1092-3:2003 This British Standard, was published under the authority of t

3、he Standards Policy and Strategy Committee on 8 March 2004 BSI 25 August 2004 ISBN 0 580 43532 6 National foreword This British Standard is the official English language version of EN 1092-3:2003, including Corrigendum July 2004. It supersedes BS 4504-3.3:1989 which is withdrawn. The UK participatio

4、n in its preparation was entrusted to Technical Committee PSE/15, Flanges, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications

5、 referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary

6、provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpreta

7、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 35 and a back cover. The BSI copyrigh

8、t notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 15319 Corrigendum No. 1 25 August 2004 Corrections to all Figures Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Un

9、controlled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN10923 September2003 ICS23.040.60 Incorporating Corrigendum July 2004 Englishversion FlangesandtheirjointsCircularflangesforpipes,valves, fittingsandaccessories,PNdesignatedPart3:Copperalloy flanges BridesetleursassemblagesBride

10、scirculairespourtubes, appareilsderobinetterie,raccordsetaccessoires, dsignesPNPartie3:Bridesenalliagesdecuivre FlanscheundihreVerbindungenRundeFlanschefr Rohre,Armaturen,FormstckeundZubehrteile,nachPN bezeichnetTeil3:FlanscheausKupferlegierungen ThisEuropeanStandardwasapprovedbyCENon27June2003. CEN

11、membersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENme

12、mber. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Be

13、lgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:rued

14、eStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN10923:2003E Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIEN 1092-3:2003/AC:2004 (E) 2 Contents Pag

15、e Foreword3 Introduction .3 1 Scope 4 2 Normative references 6 3 Terms and definitions6 4 Designation 7 4.1 General7 4.2 Standard designation 7 4.3 Information to be supplied by the equipment manufacturer.7 5 General requirements8 5.1 Materials .8 5.2 Repairs8 5.3 Bolting.8 5.4 Gaskets .8 5.5 Pressu

16、re/temperature (p/T) ratings8 5.6 Dimensions.9 5.7 Flange facings9 5.8 Spot facing or back facing10 5.9 Tolerances 11 5.10 Marking .11 Annex A (informative) Information to be supplied by the equipment manufacturer28 Annex B (informative) Application and installation.29 Annex C (informative) Approxim

17、ate masses of flanges and collars30 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC .34 Bibliography 35 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIEN

18、1092-3:2003/AC:2004 (E) 3 Foreword Due to the incorrect hatching, all figures were replaced. This document (EN 1092-3:2003) has been prepared by Technical Committee CEN/TC 74 “Flanges and their joints“ the secretariat of which is held by DIN. This European Standard shall be given the status of a nat

19、ional standard, either by publication of an identical text or by endorsement, at the latest by March 2004, and conflicting national standards shall be withdrawn at the latest by March 2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free

20、Trade Association, and supports essential requirements of the Pressure Equipment Directive (PED) 1) . For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard. EN 1092 consists of the following parts: Part 1: Steel flanges; Part 2: Cast iron flanges

21、; Part 3: Copper alloy flanges; Part 4: Aluminium alloy flanges. The annexes A, B, C and ZA are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Cze

22、ch Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Introduction This standard is related to ISO 7005-3 in respect of flanges having the same

23、PN. The types of flanges and their mating dimensions are identical with those flanges of the same DN and PN given in ISO 7005-3, except that certain flange types in accordance with this standard may regularly be supplied with raised face facings. The mating dimensions of the flanges of this standard

24、 are compatible with PN designated flanges of other materials in accordance with the other parts of EN 1092.1) Directive 97/23 EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the Laws of the Member States concerning pressure equipment; OIEC L 181. Licensed Cop

25、y: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIEN 1092-3:2003/AC:2004 (E) 4 1 Scope This European Standard specifies requirements for circular copper alloy flanges and copper alloy collars combined with loose steel plate flanges in PN design

26、ations from PN 6 to PN 40 and nominal sizes from DN 10 to DN 1800 in the types shown in Table 1. This standard also specifies dimensions and tolerances, materials and their associated pressure/temperature (p/T) ratings, flange facings and related surface finish, weld repairs, and marking, together w

27、ith information on bolting, gaskets, application/installation and approximate flange masses. The flanges specified, with the exception of integral (type 21) flanges, are for attachment to copper or copper alloy tubes in accordance with EN 12449. NOTE 1 When the flanges specified in this standard are

28、 required for use with copper or copper alloy tubes to EN 1057 in those tube diameters which are different to EN 12449, this should be agreed between the equipment manufacturer and the flange manufacturer. NOTE 2 The size of copper and copper alloy tubes is designated by reference to the outside dia

29、meter in millimetres. NOTE 3 See also annex B. NOTE 4 Non-gasketed pipe joints are outside the scope of this standard. Table 1 Types of flanges and collars Type no. Description 01 Plate flange in copper alloy for brazing or welding 02 Loose plate flange in steel with a plate collar (type 32) in copp

30、er alloy, for brazing or welding. 04 Loose plate flange in steel with a weld-neck collar (type 34) in copper alloy, for welding. 05 Blank flange in copper alloy. 05C Blank flange in steel clad with a copper alloy jointing face. 07 Loose plate flange in steel with a slip-on collar (type 37) in copper

31、 alloy, for soft soldering, brazing or welding. 11 Weld-neck flange in copper alloy for welding. 12 Hubbed slip-on flange in copper alloy, for soft soldering, brazing or welding. 14 Hubbed slip-on flange in copper alloy supplied with tube stops, for soft soldering, brazing or welding. 21 Integral fl

32、ange in copper alloy as part of some other equipment or component 32 Plate collar in copper alloy 34 Weld-neck collar in copper alloy. 37 Slip-on collar in copper alloy. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIEN 1092-3:20

33、03/AC:2004 (E) 5 Copper alloy component Steel component Type 01 Plate flange in copper alloy for brazing or welding Type 02, 32 Loose plate flange in steel with a plate collar (type 32) in copper alloy for brazing and welding Type 04, 34 Loose plate flange in steel with a weld-neck collar(type 34) i

34、n copper alloy for welding Type 05, 05C 05 Blank flange in copper alloy 05C Blank flange in steel clad with a copper alloy jointing face Type 07, 37 Loose plate flange in steel with a slip-on collar (type 37) in copper alloy, for soft soldering, brazing or welding Type 11 Weld-neck flange in copper

35、alloy for welding Type 12 Hubbed slip- on flange in copper alloy, for soft soldering, brazing or welding Type 14 Hubbed slip-on flange in copper alloy supplied with tube stops, for soft soldering, brazing or welding Type 21 Integral flange in copper alloy as part of some other equipment or component

36、 Figure 1 Types of flanges and collars Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIEN 1092-3:2003/AC:2004 (E) 6 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other pu

37、blications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revi

38、sion. For undated references the latest edition of the publication referred to applies (including amendments). EN 1333:1996, Pipework components Definition and selection of PN. EN 1652, Copper and copper alloys Plate, sheet, strip and circles for general purposes. EN 1982, Copper and copper alloys I

39、ngots and castings. EN 10028-2, Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties. EN 10222-2, Steel forgings for pressure purposes Part 2: Ferritic and martensitic steels with specified elevated temperature propertie

40、s. EN 12420, Copper and copper alloys Forgings. EN 12449, Copper and copper alloys Seamless round tubes for general purposes. EN ISO 887, Plain washers for metric bolts, screws and nuts for general purposes General plan (ISO 887:2000). EN ISO 4287, Geometrical Product Specifications (GPS) Surface te

41、xture: Profile method Terms, definitions and surface texture parameters (ISO 4287:1997). EN ISO 6708:1995, Pipework components Definition and selection of DN (nominal size) (ISO 6708:1995). 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1 DN s

42、ee EN ISO 6708:1995 3.2 PN see EN 1333:1996 3.3 maximum allowable pressure, PS means the maximum allowable pressure for which the equipment is designed, as specified by the equipment manufacturer 3.4 maximum allowable temperature, TS means the maximum allowable temperature for which the equipment is

43、 designed, as specified by the equipment manufacturer Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 15 November 2004, Uncontrolled Copy, (c) BSIEN 1092-3:2003/AC:2004 (E) 7 4 Designation 4.1 General The types of flanges and their reference numbers are given in Table 1 and

44、 the range of DN applicable to each flange type and to each PN shall be as given in Table 3. 4.2 Standard designation Flanges and collars in accordance with this standard shall be designated by the following: a) Designation, e.g. flange or collar; b) Number of this standard, EN 1092-3; c) Number of

45、flange type in accordance with Figure 1; d) Type of flange facing, A or B in accordance with Figure 1 (only for types 11, 12, 14 and 21); e) PN designation, PN; f) Nominal size, DN; g) Bore diameter B 1(only for flanges which can be made to suit more than one tube diameter see Tables 5 to 9); h) Mat

46、erial number or symbol (see Tables 11 and 12) (for type 05C flanges it is necessary to specify both the material of the flange and the material of the cladding). EXAMPLE 1 Designation of a plate flange type 01 with facing type A, in PN 6 and nominal size DN 800 and in material symbol CuAl8Fe3: Flang

47、e EN 1092-3/01A/PN 6/DN 800/CW303G EXAMPLE 2 Designation of a loose flange type 07, in PN 10 and nominal size DN 50 and in material symbol S235JR: Flange EN 1092-3/07/PN 10/DN 50/S235JR EXAMPLE 3 Designation of slip-on collar type 37, in PN 10 and nominal size DN 50 with bore diameter B 1 = 57,23 an

48、d in material symbol CuZn20Al2As: Collar EN 1092-3/37/PN 10/DN 50/57,23/CW702R EXAMPLE 4 Designation of a blank flange type 05C with clad jointing face, in PN 25 and nominal size DN 150 and in materials symbols S235JR (for blank flange) and CuNi30Mn1Fe (for cladding): Flange EN 1092-3/05C/PN 25/DN 150/S235JR-CW354H EXAMPLE 5 Designation of a weld-neck flange type 11 with facing type B, in PN 16 and nominal size DN 100 and in material symbol CuAl10Fe2-C: Flange EN 1092-3/11B/