BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf

《BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf》由会员分享，可在线阅读，更多相关《BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD AEROSPACE SERIES BS A 356

2、:2000 ISO 13598:2000 ICS 49.030.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated DimensionsThis British Standard, having been prepared under the direction of the En

3、gineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 April 2000 BSI 04-2000 ISBN 0 580 34622 6 BS A 356:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 1359

4、8:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee ACE/12, Aerospace fasteners and fastening systems, to Subcommittee ACE/12/1, Aerospace fasteners and fastening systems (international), which has the responsibility to:

5、aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organiz

6、ations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standa

7、rds Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standar

8、d does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the docume

9、nt was last issued.Referencenumber ISO13598:2000(E) INTERNATIONAL STANDARD ISO 13598 Firstedition 2000-03-01 AerospaceInserts,self-locking, withMJthreads,reducedflanges,closed type,inmetallicmaterial,coatedor uncoatedDimensions Aronautique et espace Douilles filetes, freinage interne et filetage MJ,

10、 joues rduites, du type ferm, en matriau mtallique, revtues ou non revtues Dimensions BS A 356:2000ii BS A 356:2000 iii Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarr

11、iedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternational

12、Electrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting. PublicationasanInternationalSta

13、ndardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. AttentionisdrawntothepossibilitythatsomeoftheelementsofthisInternationalStandardmaybethesubjectof patentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. InternationalStandardISO13598waspreparedbyTechnicalCommit

14、teeISO/TC20, Aircraft and space vehicles, SubcommitteeSC4, Aerospace fastener systems. BS A 356:2000BS A 356:2000INTERNATIONALSTANDADR ISO89531:(0002)E1 AerospaceInserts,self-locking,withMJthreads,reduced flanges,closedtype,inmetallicmaterial,coatedoruncoated Dimensions 1 Scope ThisInternationalStan

15、dardspecifiesthedimensionsofclosedinserts,withself-lockingMJthreadsandreduced flanges,inmetallicmaterial,coatedoruncoated,forhoneycombandcompositematerials.Theclassification referringtostrengthandtemperature,dependingonthecorematerialandpottingcompound,isnotspecified. ThisInternationalStandardisonly

16、applicabletothecompilationofaerospaceproductstandards. 2 Normativereference Thefollowingnormativedocumentcontainsprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.Howev

17、er,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyingthemostrecenteditionofthenormativedocumentindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternat

18、ionalStandards. ISO5855-2:1999, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. 3 Configurationanddimensions SeeFigure1andTable1.Dimensionsandtolerancesareexpressedinmillimetres.Theyapplytoinsertsafterany surfacecoating(s). BS A 356:2000 2 Detailsofformnotstatedareatthemanufacturer

19、sdiscretion. Key 1 Thread 2 Pitchdiameter 3 Shankdeformedthisareatoprovidethreadlock 4 Antirotationfeatureatmanufacturersoptiononshankorbottomflange 5 Pottingandventslotsradiusedorsquared a Thesevalues,inmicrometres,arevalidpriortoanysurfacecoating(s).Thevaluesdonotapplytothreadshavingasurface textu

20、reobtainedbyusualmanufacturingmethods. Figure1 BS A 356:2000 3 Table1 Diameter Thread a ABCDE b F code 0 0,25 0,25 0,25 min. nom. tol. 030 MJ3 0,5-4H6H 36 040 MJ4 0,7-4H6H 48 9or12or15 or19or22or25 050 MJ5 0,8-4H6H 11,5 9,1 510 12or15or19 or22or25 060 MJ6 1-4H5H 12,7 10,3 2,4 612 15or19 or22or25 0,2

21、5 a InaccordancewithISO5855-2 b Effectivelengthofaboltthreadengagement 4 Exampleofapplication SeeFigure2. Key 1 Washer 2Bolt 3 Pottingcompound 4 Attachedcomponent 5 Sandwichpanel 6 Insert Figure2 BS A 356:2000BS A 356:2000 ISO 13598:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | |

22、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national b

23、ody responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the lat

24、est amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which

25、can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standard

26、s publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on sta

27、ndards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Informati

28、on Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020

29、8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system

30、or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.