BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf

《BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf》由会员分享，可在线阅读，更多相关《BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD AEROSPACE SERIES BS A 353

2、:2000 ISO 13595:2000 ICS 49.030.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated DimensionsThis British Standard, having been prepared under the direction of the Engineering Se

3、ctor Committee, was published under the authority of the Standards Committee and comes into effect on 15 April 2000 BSI 04-2000 ISBN 0 580 34599 8 BS A 353:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 13595:2000 and i

4、mplements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee ACE/12, Aerospace fasteners and fastening systems, to Subcommittee ACE/12/1, Aerospace fasteners and fastening systems (international), which has the responsibility to: aid enquirer

5、s to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations repre

6、sented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspo

7、ndence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not o

8、f itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last

9、issued.Referencenumber ISO13595:2000(E) INTERNATIONAL STANDARD ISO 13595 Firstedition 2000-03-01 AerospaceInserts,withself-locking floatingnut,withMJthreads,inmetallic material,coatedoruncoatedDimensions Aronautique et espace Douilles, avec crou flottant, freinage interne et filetage MJ, en matriau

10、mtallique, revtues ou non revtues Dimensions BS A 353:2000ii BS A 353:2000 iii Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Each

11、memberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmatt

12、ersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthemem

13、berbodiescastingavote. AttentionisdrawntothepossibilitythatsomeoftheelementsofthisInternationalStandardmaybethesubjectof patentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. InternationalStandardISO13595waspreparedbyTechnicalCommitteeISO/TC20, Aircraft and space vehicles,

14、 SubcommitteeSC4, Aerospace fastener systems. BS A 353:2000BS A 353:2000INTERNATIONALSTANDADR ISO59531:(0002)E1 AerospaceInserts,withself-lockingfloatingnut,withMJ threads,inmetallicmaterial,coatedoruncoatedDimensions 1 Scope ThisInternationalStandardspecifiesthedimensionsofinserts,withself-lockingf

15、loatingnut,withMJthreads,in metallicmaterial,coatedoruncoated,forhoneycombandcompositematerials.Theclassificationreferringto strengthandtemperature,dependingonthecorematerialandpottingcompound,isnotspecified. ThisInternationalStandardisonlyapplicabletothecompilationofaerospaceproductstandards. 2 Nor

16、mativereference Thefollowingnormativedocumentcontainsprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareenc

17、ouragedto investigatethepossibilityofapplyingthemostrecenteditionofthenormativedocumentindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternationalStandards. ISO5855-2:1999, Aerospace MJ threads Part 2:

18、 Limit dimensions for bolts and nuts. 3 Configurationanddimensions SeeFigure1andTable1.Dimensionsandtolerancesareexpressedinmillimetres.Theyapplytoinsertsafterany surfacecoating(s). BS A 353:20002 Detailsofformnotstatedareatthemanufacturersdiscretion. Key 1 RadialfloatofnutrelativetohousingW 0,75 2

19、Thread 3 Shankdeformedthisareatoprovidethreadlock 4 Housing 5Nut 6Cap 7 Antirotationknurl 8 Pottingandventhole a Thesevalues,inmicrometres,arevalidpriortoanysurfacecoating(s).Thevaluesdonotapplytothreadshavingasurface textureobtainedbyusualmanufacturingmethods. Figure1 BS A 353:2000 3 Table1 ABCDE b

20、 F Diameter code Thread a 0 0,25 0,25 0,25 min. max. 040 MJ4 0,7-4H6H 4,7 9 9,4 050 MJ5 0,8-4H6H 17,5 12,7 5,7 10,5 10,9 060 MJ6 1-4H5H 19 15 2,4 6,7 13,8 14,2 a InaccordancewithISO5855-2 b Effectivelengthofaboltthreadengagement 4 Exampleofapplication SeeFigure2. Key 1 Washer 2Bolt 3Nut 4 Pottingcom

21、pound 5 Attachedcomponent 6 Sandwichpanel 7 Insert Figure2 BS A 353:2000BS A 353:2000 ISO 13595:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

22、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is inc

23、orporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if an

24、yone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called

25、PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international

26、standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical H

27、elp to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive

28、 substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the inte

29、rnational standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Th

30、is does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.