BS 6920-3-2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temp.pdf

《BS 6920-3-2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temp.pdf》由会员分享，可在线阅读，更多相关《BS 6920-3-2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temp.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS 6920-3:2000 ICS 13.060

2、.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 3: High temperature testsThis British Standard, having been prepar

3、ed under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 May 2000 BSI 05-2000 The following BSI references relate to the work on this standard: Committee reference EH/3/7 Draft for comment 99/56013

4、2 DC ISBN 0 580 33112 1 BS 6920-3:2000 Amendments issued since publication Amd. No. Date Comments Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee EH/3, Water quality, to Subcommittee EH/3/7, Effects of materials on water

5、quality, upon which the following bodies were represented: Association of Manufacturers of Domestic Electrical Appliances Automatic Vending Association of Britain British Bathroom Council British Cement Association British Coatings Federation Ltd. British Malleable Tube Fittings Association British

6、Non-Ferrous Metals Federation British Plastics Federation British Plumbing Fittings Manufacturers Association British Precast Concrete Federation Ltd. British Rubber Manufacturers Association British Valve and Actuator Manufacturers Association British Water Department of the Environment for Norther

7、n Ireland The Drinking Water Inspectorate Galvanizers Association Laboratory of the Government Chemist Lead Development Association Pipeline Industries Guild UK Steel Association UK Water Byelaws Scheme Water Research Centre Water UK Zinc Development AssociationBS 6920-3:2000 BSI 05-2000 i Contents

8、Page Committees responsible Inside front cover Foreword ii Introduction 1 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Principle 1 5 Apparatus 1 6 Samples 1 7 Test procedure 2 8 Expression of results 2 9 Test report 2ii BSI 05-2000 BS 6920-3:2000 Foreword This part of BS 6920 has b

9、een prepared by Subcommittee EH/3/7 under the direction of the Health and Environment Sector Committee. This part of BS 6920 supersedes BS 6920-3:1990, which is withdrawn. This edition introduces technical changes but it does not reflect a full review or revision of the standard. BS 6920 is publishe

10、d in several parts, namely Part 1: Specification, Part 2: Methods of test, Part 3: High temperature tests and Part 4: The GCMS identification of water leachable organic substances. Part 2 is further subdivided into a number of sections and subsections as follows. Section 2.1: Samples for testing; Se

11、ction 2.2: Odour and flavour of water; Subsection 2.2.1: General method of test; Subsection 2.2.2: Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes; Subsection 2.2.3: Method of testing odours and flavours imparted to water by hoses for conveying water fo

12、r food and drink preparation; Section 2.3: Appearance of water; Section 2.4: Growth of aquatic microorganisms; Section 2.5: The extraction of substances that may be of concern to public health; Section 2.6: The extraction of metals. Annex A is informative. A British Standard does not purport to incl

13、ude all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages

14、 i and ii, pages 1 and 2, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. BSI 05-2000 1 BS 6920-3:2000 Introduction Non-metallic products used in contact with hot and boiling water can leach water soluble compoun

15、ds not detectable in significant quantities when tested under the conditions of test described in BS 6920-2. Such products, if satisfactory in the tests described in part 2, can be tested by the methods described in this part of BS 6920 if they are intended for use in hot domestic water installation

16、s where the water in contact with the product will pass to a draw-off point and hence could be used for drinking or culinary purposes. Materials use in plastics kettles can also be assessed for suitability for drinking purposes using these tests. NOTE It is recommended that no boiling water tests ar

17、e undertaken on non-metallic products until these products have been shown to comply with the complete requirements of BS 6920, including an Odour and Flavour assessment undertaken at 858C. 1 Scope This part of BS 6920 describes methods designed to assess the ability of a non-metallic product to aff

18、ect hot and boiling water intended for human consumption by imparting a discernible odour or flavour, or any noticeable colour or turbidity. It is also applicable in assessing the leachability in hot or boiling water of metals from non-metallic products and the extraction from such products of subst

19、ances that may be of concern to public health. It is not applicable to the test for growth of aquatic microorganisms (see BS 692-2.4). Products used exclusively in industrial or steam services are excluded. 2 Normative references The following normative documents contain provisions which, through re

20、ference in this text, constitute provisions of this part of BS 6920. For dated references, subsequent amendments to or revisions of any of these publications do not apply. For undated references, the latest edition of the publication referred to applies. BS 6920-1:2000, Suitability of non-metallic p

21、roducts for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 1: Specification. BS 6920-2.2.1, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the qual

22、ity of the water Part 2: Methods of test Section 2.2: Odour and flavour of water Subsection 2.2.1: General method of test. BS 6920-2.2.2, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 2:

23、Methods of test Section 2.2: Odour and flavour of water Subsection 2.2.2: Method of testing tastes imparted to water by hoses. BS 6920-2.2.3, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part

24、 2: Methods of test Section 2.2: Odour and flavour of water Subsection 2.2.3: Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation. BS 6920-2.3, Suitability of non-metallic products for use in contact with water intended for human consumption with re

25、gard to their effect on the quality of the water Part 2: Methods of test Section 2.3: Appearance of water. BS 6920-2.4, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 2: Methods of test Se

26、ction 2.4: Growth of aquatic microorganisms. BS 6920-2.5, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 2: Methods of test Section 2.5: The extraction of substances that may be of concern

27、 to public health. BS 6920-2.6, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 2: Methods of test Section 2.6: The extraction of metals. 3 Terms and definitions For the purposes of this pa

28、rt of BS 6920, the definitions given in BS 6920-2.1 apply. 4 Principle The product is immersed in test water at a temperature of between 308C and 858C in the manner set out in sections 2.2, 2.3, 2.5 and 2.6 of BS 6920. Additional testing in boiling water is carried out in a similar manner. 5 Apparat

29、us 5.1 Water bath or incubator, capable of maintaining a test container at the extraction temperature 28C (see 7.1). 6 Samples Samples shall comply with all the requirements of BS 6920-2.1:2000, 4.1, and any of those that apply to the sample in BS 6920 Section 2.1:2000, 4.2.2 BSI 05-2000 BS 6920-3:2

30、000 7 Test procedure 7.1 Hot water testing 7.2 Extraction temperature Store the sample in the test water during the extraction procedures (see 7.2) at the maximum water temperature for which the product is intended to be used (not lower than 308C) or 858C, whichever is the lower. 7.2.1 Extraction pr

31、ocedure Undertake each extraction procedure in accordance with that given in sections 2.2, 2.3, 2.5 and 2.6 of BS 6920 in a water bath or incubator (5.1) maintained at the required temperature (see 7.1.1). 7.2.2 Testing Before undertaking the measurements given in sections 2.2, 2.3, 2.5 and 2.6 of B

32、S 6920 as appropriate, allow each container plus test water and sample or reference container to cool to (25 2)8C. Then carry out the tests on the extracts from each sample as given in those sections. 7.3 Boiling water testing 7.3.1 Extraction procedure Place a sample with a total surface area of 15

33、 000 mm 2 into a 1.5 l clean borosilicate beaker. Add test water to give a total volume of 1 l, place a borosilicate glass watch-glass over the top of the beaker and then heat the water and sample to boiling point. Boil the water for (5 1) minutes. Cool the sample and water to (25 2)8C, add sufficie

34、nt test water to bring the total volume of water plus sample back to 1 l and collect the extract for the appropriate assessment(s). Into a second beaker place 1 l of test water and boil the water for (5 1) minutes. Cool the water to (25 2)8C and add sufficient test water to bring the total volume ba

35、ck to 1 l. 7.3.2 Testing Carry out the tests on the extracts from each sample in accordance with BS 6920-2. Apply the appropriate criteria in accordance with BS 6920-1 to assess the results obtained. NOTE Normally testing is limited to the “Odour and Flavour of Water Test”, BS 6920-2.2.1. If appropr

36、iate, on the basis of the result(s) on the first leachate, repeat the boiling periods, using the same test sample(s) and with fresh water on each occasion, for a maximum of seven 5 minute periods. 8 Expression of results Express the results for each test on a sample in accordance with the appropriat

37、e section of BS 6920-2. 9 Test report In addition to the requirements for the test report given in the appropriate section of BS 6920-2, include the temperature at which the test container plus sample and test water were maintained throughout the extraction period(s).blankBS 6920-3:2000 BSI 389 Chis

38、wick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Stand

39、ards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British St

40、andards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the techn

41、ical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orde

42、rs for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standar

43、ds, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on al

44、l its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Member

45、ship Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extrac

46、t may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbo

47、ls, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.