BS 6019-1980 Recommendations for performance standards in building - Contents and presentation《建筑物性能推荐标准 内容和表述方法》.pdf

《BS 6019-1980 Recommendations for performance standards in building - Contents and presentation《建筑物性能推荐标准 内容和表述方法》.pdf》由会员分享，可在线阅读，更多相关《BS 6019-1980 Recommendations for performance standards in building - Contents and presentation《建筑物性能推荐标准 内容和表述方法》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6019:1980 ISO 6240:1980 Recommendations for Performance standards in building: contents and presentation ISO title: Performance standards in building Contents and presentation UDC 69.001.3:006.83:001.818BS6019:1980 This British Standard, having been prepared under the directionof

2、 the Basic Data and Performance Criteria for CivilEngineering and BuildingStructures StandardsCommittee, was published under the authority ofthe Executive Board and comesinto effect on 31December1980 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference BD

3、B/1 Draft for comment 78/14946 DC ISBN 0 580 11731 6 Cooperating organizations The Basic Data and Performance Criteria for Civil Engineering and Building Structures Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following: Agrment

4、Board* Health and Safety Executive* Aluminium Federation Incorporated Association of Architects and Association of Building Component Surveyors* Manufacturers Ltd. Institute of Building Association of District Councils Institution of Civil Engineers* Association of Metropolitan Authorities* Institut

5、ion of Highway Engineers Brick Development Association* Institution of Municipal Engineers British Constructional Steelwork Association Institution of Structural Engineers* British Precast Concrete Federation Ltd. Ministry of Defence* British Woodworking Federation* Modular Society Limited* Cement a

6、nd Concrete Association National Caravan Council Limited Concrete Society Limited* National Council of Building Materials Consumer Standards Advisory Committee Producers* ofBSI* National Federation of Building Trades Convention of Scottish Local Authorities* Employers* Department of Education and Sc

7、ience* Royal Association for Disability and Department of Health and Social Security* Rehabilitation* Department of the Environment (Building Royal Institute of British Architects* Research Establishment)* Royal Institution of Chartered Surveyors* Department of the Environment (Housing and Scottish

8、Development Department* Construction)* Timber Research and Development Department of the Environment (PSA) Association* Department of Transport Trades Union Congress* Environmental Health Officers Association Federation of Associations of Specialists and Sub-contractors The organizations marked with

9、 an asterisk in the above list, together with the following, were directly represented on the Technical Committee entrusted with the preparation of this British Standard: Association of County Councils Greater London Council British Ceramic Research Association Home Office Constructional Steel Resea

10、rch and Individual expert Development Organisation Amendments issued since publication Amd. No. Date of issue CommentsBS6019:1980 BSI 10-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii 0 Introduction 1 1 Scope and field of application 1 2 Reference 1 3 Definiti

11、ons 1 4 Clauses for inclusion in performance standards 1BS6019:1980 ii BSI 10-1999 National foreword This British Standard has been prepared under the direction of the Basic Data and Performance Criteria for Civil Engineering and Building Structures Standards Committee. It is identical with ISO6240

12、“Performance standards in building Contents and presentation” prepared by ISO/TC59, Building construction, and published in1980 by the International Organization for Standardization (ISO). Terminology and conventions. The text of the International Standard has been approved as suitable for publicati

13、on, without deviation, as a BritishStandard. Some terminology and certain conventions are not identical with those used in British Standards; attention is especially drawn to the following. Wherever the words “International Standard” appear, in clauses0, 1 and3, referring to this standard, they shou

14、ld be read as “British Standard”. Where the words “International Standard” appear in4.4, 4.5.2, 4.6.1 and4.6.2 they should be read as “International Standard and/or British Standard”. Where the words “International Standard or Guides” appear in4.6 they should be read as “International Standard or Gu

15、ide and/or British Standard or Guide”. NOTETextual error. In line5 of clause 0, “clause 2” should read “clause1”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Bri

16、tish Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and 2 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will

17、 be indicated in the amendment table on the inside front cover.BS6019:1980 BSI 10-1999 1 0 Introduction This International Standard has a particularly wide range of applications within the standards field, as well as a number of further potential applications to building documents incorporating perf

18、ormance statements; these are described formally in clause2 below. Its application extends to standards that are wide-ranging in scope covering, for example, groups of products or assemblies of components as well as to the more customary standards for specific products. Different kinds of informatio

19、n on performance will be required in these different “levels” of standards, and this International Standard is intended to provide a broad, common basis of headings and sequence for arranging this information. The scope of the information to be given will also vary depending on whether the standard

20、being drafted a) covers all relevant aspects of the performance of a component or assembly, i.e.forms a comprehensive performance specification or statement; b) is restricted to one or a limited number of performance attributes, or c) includes both performance requirements and other types of require

21、ment, for example for aspects of material or construction. The detailed guidance in this International Standard relates to comprehensive standards written in performance terms only paragraph a) above. A measure of selection or interpretation will be required to determine which aspects of the guidanc

22、e apply to standards of the other types paragraphs b) and c) above. 1 Scope and field of application This International Standard specifies the basic contents to be included in performance standards for building components and assemblies, and indicates a standard order for their inclusion. It is inte

23、nded primarily for use by standards committees preparing performance standards for building components and assemblies. It should also be useful for the preparation of other types of document, such as: a) statements of required performance in building regulations and other statutory documents; b) sta

24、tements of required or achieved performance in guidance documents for building designers; c) statements of required or achieved performance in contract documents for purchasing components; d) statements of required or achieved performance in briefs and contract documents for the construction of buil

25、dings as a whole; e) statements of achieved performance in descriptive documents about manufacturers products. NOTEA document covering preparation of performance standards in building has been submitted for testing to the sub-committees and ISO technical committees concerned. 2 Reference When Intern

26、ational Standards are being produced, reference should be made to the Directives for the Technical work of ISO, Part3: Presentation of International Standards, whose recommendations for general layout should also be followed. 3 Definitions For the purposes of this International Standard, the followi

27、ng definitions apply: 3.1 component a product manufactured as a distinct unit to serve a specific function (or functions) 3.2 assembly an aggregate of components used together 3.3 performance (the) behaviour (of a product) related to use 4 Clauses for inclusion in performance standards 4.1 “Scope” G

28、ive the name of, or otherwise identify, the component or assembly which is the subject of the standard. 4.2 “Field of application” Define the intended uses of the standard itself, and of the component or assembly which is its subject. Sufficient indication of any related uses to which they are only

29、partially applicable should also be given in this clause. 4.3 “References” Refer to the other relevant standards and documents regarding applications. 4.4 “Definitions” Define all specialized terms used in the standard, following relevant International Standards.BS6019:1980 2 BSI 10-1999 4.5 “Purpos

30、e and context of use” 4.5.1 Describe the role that the component or assembly is intended to play in satisfying applicable functional requirements, either solely or in combination with other parts of construction. 4.5.2 Indicate the agents relevant to the performance of the component or assembly (for

31、example the agents or actions to which it may besubjected, or which it may generate under the intended service conditions or range of conditions). The factors shall be expressed quantitatively, and in accordance with International Standards on means of expression, where applicable. 4.6 “Performance

32、requirements” Performance requirements must be listed for final use in the building and, if necessary, for supply, transport, intermediate storage, handling and installation, in accordance with any order recommended in applicable International Standard or Guides. A distinction may need to be drawn b

33、etween those requirements which always apply and those which apply only in certain circumstances, according to the purpose and context(s) of use stated under4.5. Each performance requirement must be defined(4.6.1) and then each requirement must have specified methods of assessment or verification(4.

34、6.2) and performance values(4.6.3), together with a commentary(4.6.4), if appropriate. 4.6.1 “Definition of performance” Define each performance requirement in terms of a function which is to be fulfilled, together with the physical or chemical property or properties on which assessment or verificat

35、ion will be based. Use terms and expressions capable of quantification and in accordance with any applicable International Standards. NOTEIt may be necessary to define properties that a component or assembly shall NOT possess, for example unacceptable side-effects. 4.6.2 “Methods of assessment or ve

36、rification” For each performance requirement, describe fully or cross-refer to: a) the means (measurement, calculation, test or method of examination) by which the achieved performance of the component or assembly will be assessed or verified; and b) the means of predicting the performance over time

37、 of the component or assembly. Cross-references should be to International Standards where possible. 4.6.3 “Performance values” For each performance requirement, state upper and lower limits to the range of acceptable performance values or grades, against which the achieved performance of any partic

38、ular component or assembly will be required to be stated. Indicate the relationship of the values or grades to the purpose and context(s) of use stated under4.5, giving appropriate increments for the selection of specific values. 4.6.4 “Commentary” Give any observations, examples or data that may as

39、sist understanding. 4.7 “Description of achieved performance” State any requirements for the description (for example by manufacturers) of the achieved performance of products complying with the standard. 4.8 “Applicability to certification” Give details of the standards applicability to certificati

40、on, making reference as necessary to quality control procedures, marking, etc.blankBS 6019:1980 ISO 6240:1980 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards

41、in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our

42、products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers memb

43、ers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In r

44、esponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards thro

45、ugh its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with stand

46、ards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the p

47、ublications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written

48、permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.