BS 5551-4 3 1-1983 Fertilizers - Chemical analysis - Determination of potassium - Preparation of the test solution for determination of water-soluble potassium content《肥料 第4部分 化学分析.pdf

《BS 5551-4 3 1-1983 Fertilizers - Chemical analysis - Determination of potassium - Preparation of the test solution for determination of water-soluble potassium content《肥料 第4部分 化学分析.pdf》由会员分享，可在线阅读，更多相关《BS 5551-4 3 1-1983 Fertilizers - Chemical analysis - Determination of potassium - Preparation of the test solution for determination of water-soluble potassium content《肥料 第4部分 化学分析.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 5551-4.3.1: 1983 ISO 5317:1983 Fertilizers Part 4: Chemical analysis Section 4.3 Determination of potassium Subsection 4.3.1 Preparation of the test solution for determination of water-soluble potassium content ISO title: Fertilizers Determination of water-soluble potassium conte

2、nt Preparation of the test solution UDC 631.8:543.06:546.32BS5551-4.3.1:1983 This British Standard, having been prepared under the directionof the Chemicals Standards Committee, was published under the authority ofthe Board of BSI and comes intoeffect on 30December1983 BSI 10-1999 The following BSI

3、references relate to the work on this standard: Committee reference CIC/37 Draft for comment 82/51198 DC ISBN 0 580 13636 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Chemicals Standards Committee (CIC/-) to Technical Committee CIC/

4、37 upon which the following bodies were represented: Association of Public Analysts British Agrochemicals Association Department of Industry (Laboratory of the Government Chemist) Fertiliser Manufacturers Association Ltd. Institute of Trading Standards Administration Ministry of Agriculture, Fisheri

5、es and Food Amendments issued since publication Amd. No. Date of issue CommentsBS5551-4.3.1:1983 BSI 10-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Principle 1 3 Reagent 1 4 Apparatus 1 5 Preparation of the test sample 1 6

6、Procedure 1 7 Test report 1 Publications referred to Inside back coverBS5551-4.3.1:1983 ii BSI 10-1999 National foreword This British Standard has been prepared under the direction of the Chemicals Standards Committee in order to standardize terminology and labelling, sampling and methods of physica

7、l and chemical testing for fertilizers. For some years the United Kingdom has participated in the standardization of methods of analysing fertilizers through Subcommittee 4, Chemical analysis, of Technical Committee 134, Fertilizers and soil conditioners, of the International Organization for Standa

8、rdization (ISO). As international agreement is reached on the methods, it is proposed to publish them as Sections of BS 5551. The standard is to be published in four Parts, each Part being subdivided into Sections and, where appropriate, Subsections. The four Parts are: Part 1: Terminology and label

9、ling; Part 2: Sampling; Part 3: Physical properties; Part 4: Chemical analysis. Part 4 is to be divided into five Sections as follows: Section 4.1: Determination of nitrogen; Section 4.2: Determination of phosphorous; Section 4.3: Determination of potassium; Section 4.4: Determination of water; Sect

10、ion 4.5: Determination of other constituents. This Subsection of Part4is identical with ISO 5317:1983 “Fertilizers Determination of water-soluble potassium content Preparation of the test solution”. Terminology and conventions. The text of the International Standard has been approved as suitable for

11、 publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read a

12、s “British Standard”. The comma has been used as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Additional information. 1) This British Standard describes a method of test only and should not be used as a specification definin

13、g limits of purity. Reference to the standard should indicate that the method of test used is in accordance with BS 5551-4.3.1. 2) With reference to 6.2, water complying with BS 3978 “Water for laboratory use” is suitable. 3) With reference to clause 5 and 6.1 the phrase “pretreatment of test sample

14、s” (see clause 5) refers solely to the sampling procedures, such as sample division, used to produce “the prepared test sample” (see 6.1) and has no other significance, e.g. chemical significance. Other International Standards in this series are being prepared describing these sampling procedures an

15、d, subject to UK approval, will be published as identical Sections of BS 5551-2. Pending publication of these methods, guidance on sampling may be obtained in BS5309 “Methods for sampling chemical products” Part 1 “Introduction and general principles”, Part 3 “Sampling of liquids” and Part 4 “Sampli

16、ng of solids”. Cross-reference International Standard Corresponding British Standard ISO 1042:1981 BS 1792:1982 Specification for one-mark volumetric flasks (Identical)BS5551-4.3.1:1983 BSI 10-1999 iii A British Standard does not purport to include all the necessary provisions of a contract. Users o

17、f British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, pages 1 and 2, an inside back cover and a bac

18、k cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.iv blankBS5551-4.3.1:1983 BSI 10-1999 1 1 Scope and field of application This International Standard specifies the reference

19、method for the preparation of test solutions of fertilizers for the subsequent determination of their water-soluble potassium contents. 2 Principle Boiling of a test portion with water. 3 Reagent Use only distilled water or water of equivalent purity. 4 Apparatus Ordinary laboratory apparatus, and 4

20、.1 Flat-bottomed flask, of capacity 750 ml. 4.2 One-mark volumetric flask, of capacity1000 ml, complying with the requirements of ISO 1042 1) , class B (maximum permitted error: 0,80ml). 5 Preparation of the test sample Pretreatment of test samples of fertilizers for the determination of potassium c

21、ontent will form the subject of a future International Standard. 6 Procedure 6.1 Test portion Weigh, to the nearest0,001g,5g of the prepared test sample (see clause 5). 6.2 Dissolution Transfer the test portion (6.1) to the flask (4.1) with400ml of water. Bring to the boil and continue boiling for30

22、min. Cool the contents of the flask and transfer to the one-mark volumetric flask (4.2). Dilute to the mark, mix well and filter into a dry beaker. Discard the first50ml of filtrate. 7 Test report The test report for the subsequent determination of the water-soluble potassium content shall include t

23、he following information relevant to the preparation of the test solution: a) all the information necessary for the complete identification of the sample; b) a reference to this International Standard; c) any operations not specified in this International Standard, or regarded as optional, as well a

24、s any incidents likely to affect the results of the determination of water-soluble potassium content. 1) ISO 1042, Laboratory glassware One-mark volumetric flasks.2 blankBS5551-4.3.1:1983 BSI 10-1999 Publications referred to See national foreword.BS 5551-4.3.1: 1983 ISO 5317:1983 BSI 389 Chiswick Hi

25、gh Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendmen

26、t or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would i

27、nform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standa

28、rds. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publishe

29、d as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which

30、 give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits c

31、ontact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no

32、 extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such a

33、s symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.