BS 3056-8-1987 Sizes of refractory bricks - Specification for bricks for ladles《耐火砖尺寸 第8部分 钢铁水包用砖规范》.pdf

《BS 3056-8-1987 Sizes of refractory bricks - Specification for bricks for ladles《耐火砖尺寸 第8部分 钢铁水包用砖规范》.pdf》由会员分享，可在线阅读，更多相关《BS 3056-8-1987 Sizes of refractory bricks - Specification for bricks for ladles《耐火砖尺寸 第8部分 钢铁水包用砖规范》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS3056-8: 1987 Sizes of refractory bricks Part 8: Specification for bricks for ladles UDC 666.76431:62181BS3056-8:1987 This British Standard, having been prepared under the directionof the Refractory Products Standards Committee, was published under the authorityof the Board of BSI

2、andcomesintoeffect on 30 April1987 BSI08-1999 The following BSI references relate to the work on this standard: Committee reference RPM/4 Draft for comment85/40464 DC ISBN 0 580 15818 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Ref

3、ractory Products Standards Committee (RPM/-) to Technical Committee RPM/4 upon which the following bodies were represented: British Ceramic Research Ltd. British Gas plc British Metallurgical Plant Constructors Association British Steel Industry Cement Makers Federation Coke Oven Managers Associatio

4、n Institute of Refractories Engineers Refractories Association of Great Britain Society of Glass Technology Amendments issued since publication Amd. No. Date of issue CommentsBS3056-8:1987 BSI 08-1999 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 Nomenclature 1 3

5、Sizes 1 4 Designations and statement of dimensions 1 Table 1 Dimensions of squares 1 Table 2 Dimensions of splits 1 Table 3 Dimensions of a tile 2 Table 4 Dimensions of straights 2 Table 5 Dimensions of side arch bricks (constant back face dimension) 2 Table 6 Dimensions of side arch bricks (with me

6、dian taper) 3 Table 7 Dimensions of end arch bricks 3 Table 8 Dimensions of circle bricks 3 Table 9 Dimensions of semi-universal ladle bricks 4 Publications referred to Inside back coverBS3056-8:1987 ii BSI 08-1999 Foreword This Part of BS3056 has been prepared under the direction of the Refractory

7、Products Standards Committee. It is one of a series of new Parts intended to cover bricks for a wide range of specific applications. It includes sizes that are also included in BS3056-1 as well as more specialized shapes, thus providing a complete list for the construction of ladles for the steel in

8、dustry. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document co

9、mprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS3056-8:1987 BSI 08-19

10、99 1 1 Scope This Part of BS3056 specifies the sizes of the following shapes of refractory bricks used in the construction of ladles for the steel industry, excluding torpedo ladles: a) squares; b) splits; c) tile; d) straights; e) side arch bricks; f) end arch bricks; g) circle bricks; h) semi univ

11、ersal ladle bricks. NOTE 1The tolerances on the sizes are not specified in this Part, and may be the subject of agreement between manufacturer and purchaser. NOTE 2The titles of the publications referred to in this Part of BS3056 are listed on the inside back cover. 2 Nomenclature The names given to

12、 the various shapes of brick are as given in BS3446, with the exceptions of straights (see Table 4) and semi-universal ladle bricks (seeTable 9). NOTEBS3446 is being revised and the new edition will include all the nomenclature given here. 3 Sizes The sizes of refractory bricks for use in ladles sha

13、ll be as given in Table 1 to Table 9. 4 Designations and statement of dimensions 4.1 The designations of the sizes, where appropriate, shall be as given in Table 1 to Table 9. NOTEThe designations in Table 1, Table 2, Table 3, Table 5 and Table 7 have been retained from the previous edition of BS305

14、6 for reference purposes. They are unsuitable for the more complicated sizes, and it it envisaged that they will be phased out or modified in any future revision. They should not be used for sole reference unless it is known that the recipients of the communication are conversant with them. It is re

15、commended that if there is any doubt whether the designations will be understood, the dimensions should be stated, either in conjunction with or instead of the appropriate size designations. 4.2 The dimensions of a brick, where stated, shall be given in the order given in Table 1 to Table 9. Table 1

16、 Dimensions of squares Table 2 Dimensions of splits NOTEThe letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C 1-76 a 1LBQ-52 1LBQ-64 1LBQ-76 mm 230 230 230 230 mm 114 150 150 150 mm 76 52 64 76 a This size is included in ISO5019-1. NOTEThe

17、 letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C mm mm mm 1-25 1-38 a 1-52 230 230 230 114 114 114 25 38 52 a This size is included in ISO5019-1.BS3056-8:1987 2 BSI 08-1999 Table 3 Dimensions of a tile Table 4 Dimensions of straights aTa

18、ble 5 Dimensions of side arch bricks (constant back face dimension) NOTEThe letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C 1D-76 a mm 230 mm 230 mm 76 a This size is included in ISO5019-1. NOTEThe letters designating the dimensions rela

19、te only to the diagram in this table. Size designation Dimensions A B C 2PO b 25/O 3PO 4PO 5PO c mm 250 250 250 250 250 345 mm 124 150 155 187 220 114 mm 125 100 100 100 100 76 a In BS3446 this shape of brick is termed a “whelp”. b This size is included in ISO5019-6. c This size is included in ISO50

20、19-1. NOTEThe letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C D 1SA-12 a 1SA-6 a 1SA-3 1SAL-12 1SAL-6 1SAL-3 mm 230 230 230 230 230 230 230 mm 76 114 114 114 150 150 150 mm 76 76 76 76 76 76 76 mm 73 64 70 73 64 70 73 a These sizes are i

21、ncluded in ISO5019-2.BS3056-8:1987 BSI 08-1999 3 Table 6 Dimensions of side arch bricks (withmedian taper) Table 7 Dimensions of end arch bricks Table 8 Dimensions of circle bricks NOTEThe letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C

22、D 2P24 2P10 2/3-2P10 3/4-2P10 3P20 3P10 2/3-3P10 3/4-3P10 4P22 4P12 2/3-4P12 3/4-4P12 6P26 6P18 6P10 mm 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 mm 124 124 124 124 155 155 155 155 187 187 187 187 250 250 250 mm 137 130 87 98 110 105 70 79 111 106 71 80 113 109 105 mm 113 120 77 88

23、 90 95 60 69 89 94 59 68 87 91 95 NOTEThe letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C D 1EA-12 a 1EA-6 a 1EA-3 1EAL-8 mm 230 230 230 230 mm 114 114 114 150 mm 76 76 76 76 mm 64 70 73 68 a These sizes are included in ISO5019-2. NOTETh

24、e letters designating the dimensions relate only to the diagram in this table. Size designation Dimensions A B C D Pos87 Pos88 Pos89 Pos18 Pos40 mm 240 225 213 230 230 240 225 213 230 230 229 229 mm 200 200 200 204 220 200 200 200 204 220 211 216 mm 150 150 150 114 114 150 150 150 114 114 150 114 mm

25、 100 100 100 100 100 76 76 76 76 76 100 100BS3056-8:1987 4 BSI 08-1999 Table 9 Dimensions of semi-universal ladlebricks NOTE 1The letters designating the dimensions relate only to the diagram shown in this table. Size designation Dimensions Internal diameter of brickwork A B C D SU445 SU545 SU560 SU

26、645 SU660 SU745 SU760 SU945 SU960 mm 210 210 210 210 210 210 210 210 210 mm 196 192 197 189 194 185 192 178 186 mm 102 127 127 152 152 178 178 229 229 mm 100 100 100 100 100 100 100 100 100 mm 2810 2750 3760 2700 3710 2650 3660 2550 3550 NOTE 2When using these bricks for a spirally built lining, a s

27、pecial “starter set” or ramp is required to commence the building. This ramp can be produced in specially shaped bricks or from ramming mix formed behind a wooden former.BS3056-8:1987 BSI 08-1999 Publications referred to BS3056, Sizes of refractory bricks. BS3056-1, Specification for multi-purpose b

28、ricks 1) . BS3446, Glossary of terms relating to the manufacture and use of refractory materials. ISO5019, Refractory bricks Dimensions. ISO5019-1, Rectangular bricks. ISO5019-2, Arch bricks. ISO5019-6, Basic bricks for oxygen steel-making converters. 1) Referred to in the foreword only.BS3056-8: 19

29、87 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards a

30、re updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this B

31、ritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the lat

32、est editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those t

33、hat have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services ar

34、e also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of thes

35、e and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs a

36、nd Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of ne

37、cessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.