ASD-STAN PREN 9300-014-2006 Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Part 014 Reference proce.pdf

《ASD-STAN PREN 9300-014-2006 Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Part 014 Reference proce.pdf》由会员分享，可在线阅读，更多相关《ASD-STAN PREN 9300-014-2006 Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Part 014 Reference proce.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、ASD STANDARD NORME ASD ASD NORM prEN 9300-014 Edition P 1 October 2006 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONGulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION Aerospace

2、series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 014: Reference process description Retrieval Srie arospatiale LOTAR Archivage Long Terme et rcupration des donnes techniques produits numriques, telles que CAD 3D et PDM Partie

3、 014 : Description du processus de rfrence Mise disposition Luft- und Raumfahrt LOTAR Langzeitarchivierung und Bereitstellung digitaler technischer Produktdokumentationen, beispielsweise 3D CAD und PDM Daten Teil 014: Referenzprozessbescheibung Bereitstellung This “Aerospace Series“ Prestandard has

4、been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subs

5、equent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submit

6、ted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing an

7、y national standards conflicting with the EN. Edition approved for publication 31 October 2006 Comments should be sent within six months after the date of publication to ASD-STAN Engineering Procedures and Processes Domain Copyright 2006 by ASD-STAN prEN 9300-014:20062 Contents Page Foreword3 1 Scop

8、e 4 2 Normative references 4 3 Terms, definitions and abbreviations4 4 Applicability4 5 Retrieval5 6 Detailed process steps description .5 6.1 General5 6.2 Request retrieval data .6 6.3 Access 6 6.4 Data selection.6 6.5 Prepare data for dissemination6 6.6 Generate DIP 7 6.7 Provide DIP.7 7 Support P

9、rocess Steps: 7 7.1 Preservation Planning.7 7.2 Data Management 8 8 Data description.8 8.1 General8 8.2 Involved roles:8 8.3 Involved data:.8 Bibliography. 10 Figure Figure 1 Retrieval.5 prEN 9300-014:20063 Foreword This standard was prepared jointly by ASD-STAN and the PROSTEP iViP Association. The

10、 PROSTEP iViP Association is an international non-profit association in Europe. For establishing leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from leading industries, system vendors and research institutions. Its product and process data standardization

11、 activities at European and worldwide levels are well known and accepted. The PROSTEP iViP Association sees this standard and the related parts as a milestone of product data technology. Users should note that all standards undergo revision from time to time and that any reference made herein to any

12、 other standard implies its latest edition, unless otherwise stated. prEN 9300-014:20064 1 Scope EN 9300-014 provides a detailed description for the recommended process of retrieval of 3D and PDM data. A main focus lays on the secure process, which implies the defined search for archived data elemen

13、ts and the dissemination of the data packages, which includes e.g. the check for digital signatures or the validation of archived data as overviewed in EN 9300-010. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references,

14、 only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14721:2003, Space data and information transfer systems Open archival information system Reference model OAIS. EN 9300-003, Aerospace series LOTAR LOng Term

15、Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 003: Fundamentals and concepts. 1)EN 9300-007, Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 007: Terms and Ref

16、erences. 1)EN 9300-010, Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 010: Overview Data Flow. 2)3 Terms, definitions and abbreviations For the purposes of this standard, the terms, definitions and abbreviations

17、given in EN 9300-007 shall apply. 4 Applicability This EN 9300-014 is applicable to new 3-D product data records and may be applicable to existing 3D product data records, on current and earlier products, produced using previous regulations, standards and procedures. The current version is focused o

18、n product data as defined in the domain specific parts. 1) In preparation at the date of publication. 2) Published as ASD Prestandard at the date of publication of this standard. prEN 9300-014:20065 5 Retrieval See Figure 1. Figure 1 Retrieval The process includes a recommended access check, provide

19、s functionality for a data search to select the required data (provided the Consumer is allowed to see it), and the generation of a Dissemination Information Package (DIP). The generation of the DIP should meet the requirements of the Consumer. The sub process shall be certified. Input data: Retriev

20、al request Output data: DIP 6 Detailed process steps description 6.1 General Input and output data described in this standard represent the minimal requirements for the fulfilment of the process steps. Additional data may be added, but must match at a minimum the requirements for the information pac

21、kage. (See EN 9300-003, section 5.3.2.1 “Definition of the core model”). prEN 9300-014:20066 6.2 Request retrieval data The role Consumer/Administrator initiates a retrieval request for a data package. The request shall contain all information needed for the successful retrieval process i.e. selecti

22、on of requested data, data format required for the DIP and any validation information required. Output data: Request 6.3 Access The Archive centrally supervises the access rights for each role. The supervisor check if the role has the access rights for triggered queries. Input data: Request Output d

23、ata: Access granted information 6.4 Data selection The Archive provides the functions to search for the requested data. This includes the verification of access rights and methods for filtering the selection; according to access rights, It may be implemented in batch or interactive mode. The filteri

24、ng may result in successive and related requests from the consumer. It may implemented in batch or interactive mode. The filtering may result in successive and related requests of the consumer. Input data: Request Access granted information Support information Output data: Selection information 6.5

25、Prepare data for dissemination The archive checks the usability of data and the copies the AIP for dissemination. Input data: Selection information Support information Output data: Copy of AIP prEN 9300-014:20067 6.6 Generate DIP The archive generates the Dissemination Information Package (DIP), whi

26、ch is derived from one or more AIPs. The DIP generation includes any conversion of Content Information/ Preservation Description Information into the required data format and validates the converted data. This sub process shall be certified. The archive and the consumer shall define an agreement for

27、 each category of product information to preserve. It shall include at a minimum the specification of: preserved the key characteristics of the product information, the defined Descriptive Information of the SIP, the control criterias used for the verification, the validation properties of the sourc

28、e information to archive, the related KPIs. The Generate DIP Process includes some Error handling Procedures which secures the consistency of the DIP within the retrieval Process. Input data: Copy of AIP Support information Output data: Dissemination Information Package (DIP) 6.7 Provide DIP The arc

29、hive transfers the DIP from archive environment to consumers working environment. Input data: DIP Output data: DIP 7 Support Process Steps: 7.1 Preservation Planning The process provides services and functions for monitoring the environment of the archive and recommendations to ensure that the infor

30、mation stored in the archive remains accessible to the consumer over the long term, even if the original computing environment becomes obsolete. Preservation Planning functions include developing recommendations for archive standards and policies and monitoring changes in the technology environment,

31、 archiving format and the addressed consumer. Output data: Support information prEN 9300-014:20068 7.2 Data Management The Data Management is responsible for maintaining the integrity of the Data Management database, which contains both Descriptive Information and system information. The Data Manage

32、ment is responsible for creating any schema or table definitions required to support Data Management functions; for providing the capability to create, maintain and access customized user views of the contents of this storage; and for providing internal validation (e.g., referential integrity) of th

33、e contents of the database. A log describing the history of activity in the repository shall be archived. The Data Management is carried out in accordance with policies received from Administration. Output data: Support information 8 Data description 8.1 General The descriptions here are informative

34、; the definitions are found in the part EN 9300-007. 8.2 Involved roles: 8.2.1 Archive The Archive is the archiving system, which usual supports at least the key functions of an archiving architecture according to ISO 14721:2003 (OAIS). Key functions are administration, data management, archival sto

35、rage, access control, preservation planning). 8.2.2 Consumer The consumer is an organization, person, or client system, which interact with the services offered by the archive to find preserved information of interest and to access that information in detail. This can include other archives, as well

36、 as internal archive persons or system components. Typical roles of type “consumer“ may be Design Engineers, Suppliers, Manufactures, Customers, Regulatory Agencies or Quality. 8.2.3 Administrator Administrator is the role (organization or person), which is responsible for the management of the arch

37、ive and daily operation. The role performs actions such as access control, monitoring and error handling. The role is not directly involved in the archiving and retrieval processes. The role may not be responsible for the administration of further external tools like quality agents, the evolved TDM,

38、 CAx, PDM or Data Exchange applications. 8.3 Involved data: 8.3.1 Archival Information Package (AIP) The AIP consists of following main information objects: Content Information (archiving formatted and optional native formatted) Packaging Information Preservation Description Information (Validation

39、Properties, context information regarding the Content Information) Digital Signature Information prEN 9300-014:20069 The Content Information is a set of information that is of main interest and has all the qualities needed for permanent storage. Packaging information shall be that kind of informatio

40、n that is used to bind and identify the components of an Information Package. Preservation Description Information is the kind of information which is necessary for adequate preservation of the Content Information and which can be categorized as Provenance, Reference, Fixity, and Context information

41、. Digital Signature Information is the information about authenticity (identify the signature-key-owner), data integrity and time stamp information. 8.3.2 Dissemination Information Package (DIP) The DIP consists of following main information objects: Content Information (this may include native form

42、at and archive format) Packaging Information The Information Package will be generated by the archive as an answer to a consumers request. The DIP may contain collections of AIPs. The AIP Content Information will be converted into the data format of the target system. 8.3.3 Access granted informatio

43、n Contains the verification of the requesters access rights. 8.3.4 Request Manually generated request from the Consumer, or from the Administrator, which can consist, for example, of partial or full part number or assembly knot information. The access request will be transferred to the archive front

44、end. The request must contain the account information, such as name and/or password of the current user. 8.3.5 Selection information Contains a list of selected documents for retrieval. 8.3.6 Copy of AIP Copy of stored AIP. The original AIP remains within the archive. 8.3.7 Support Information Gener

45、al support information from, e.g., data management, this means additional rules and constrains for the process. prEN 9300-014:200610 Bibliography 1 ISO 10303, Industrial automation systems and integration Product data representation and exchange STEP 2 P.P.S. Chen The Entity Relationship model - tow

46、ard a unified view of data, ACM Transactions on Database Systems 1, (March 1976) 3 VDA Recommendation 4956: Product Data Exchange Part 1: Assembly Data Exchange (November 2002) 4 Reference Model for an Open Archival Information System (OAIS): Foreword, CCSDS 650.0-B-1, BLUE BOOK, January 2002 5 STEP

47、 Towards open systems, STEP Fundamentals & Business Benefits, Dr. Kais Al- Timini, John Mac Krell, 1999, CIMdata 6 BooRumJac99 Booch, G. Rumbaugh, J. Jacobson, I. The Unified Modeling Language, User Guide, Addison-Wesley, 1999 7 BGB: Brgerliches Gesetz Buch german civil code 8 European Union Directi

48、ve 99/93/EG: The directive is a common and comparable pan-European standard for offering and using electronic signature proceedings shall be established. 9 European Union Directive 98/37/EC: The directive is a common and comparable pan-European standard which means that no machine can be placed on t

49、he EU single market or installed if it does not bear the CE Marking. 10 IDEF0: is a method designed to model the decisions, actions, and activities of an organization or system. IDEF0 was derived from a well-established graphical language, the Structured Analysis and Design Technique (SADT), introduced by Douglas T. Ross in the early 1970s. (David A. Marca and Clement L. McGowan, SADT: Structured Analysis and Design Techniques. McGraw-Hill,