ASD-STAN PREN 4531-101-2014 Aerospace series Connectors optical circular single and multipin coupled by triple start threaded ring Flush contacts Part 101 Optical contact for EN 46.pdf
《ASD-STAN PREN 4531-101-2014 Aerospace series Connectors optical circular single and multipin coupled by triple start threaded ring Flush contacts Part 101 Optical contact for EN 46.pdf》由会员分享,可在线阅读,更多相关《ASD-STAN PREN 4531-101-2014 Aerospace series Connectors optical circular single and multipin coupled by triple start threaded ring Flush contacts Part 101 Optical contact for EN 46.pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4531-101 Edition P 3 July 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: 49.060 Supersedes edition
2、P 2 of December 2010 and will supersede EN 4531-101:2012 Descriptors: Aerospace industry, aircraft, aircraft equipment, optical connector, elements of optical connection, optical contact, characteristics, test, quality assurance ENGLISH VERSION Aerospace series Connectors, optical, circular, single
3、and multipin, coupled by triple start threaded ring Flush contacts Part 101: Optical contact for EN 4641 multimode cable 55 C to 125 C Product standard Srie arospatiale Connecteurs optiques circulaires accouplement par bague filete trois filets Contacts affleurants Partie 101 : Contact optique pour
4、cble multimode EN 4641 55 C 125 C Norme de produit Luft- und Raumfahrt Optische Rundsteckverbinder mit dreigngiger Schraubkupplung Bndige Kontakte Teil 101: Optischer Kontakt fr EN 4641-Multimode-Lichtwellenleiterkabel 55 C bis 125 C Produktnorm This “Aerospace Series“ Prestandard has been drawn up
5、under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the
6、publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft
7、 European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national sta
8、ndards conflicting with the EN. Edition approved for publication 1st July 2014 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4531-101:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Termi
9、ni dimensions . 4 4 General dimensions of the optical termini 5 5 Technical specification . 7 6 Tests according to EN 2591-100. 7 7 Cleaning instructions 8 8 Tooling 8 9 Termination instructions . 9 10 Designation 9 Bibliography 10 Foreword This standard was reviewed by the Domain Technical Coordina
10、tor of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4531-101:2014 (E) 3 1 Scope This standard defines the performance and dimensions o
11、f optical PC profiled contact for multimode 62,5 micrometres/125 micrometres or 50 micrometres/125 micrometres fibre and (1,8 0,1) mm diameter cable. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applica
12、tion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591 (all parts), Aerospace series Elements of electrical and optical connection Test methods EN 4531-001, Aerospace series Connect
13、ors, optical, circular, single and multipin, coupled by triple start threaded ring Flush contacts Part 001: Technical specificationEN 4533 (all parts), Aerospace series Fibre optic systems Handbook 1)EN 4641 (all parts), Aerospace series Cables, optical 125 m diameter cladding 1)TR 4646, Aerospace s
14、eries Termination procedure for EN 4531 optical contact 2)MIL-I-81969/8-10, Installing and removal tools, connector electrical contact, types I and II, class 2, composition A 3)1) Published as ASD-STAN Prestandard at the date of publication of this standard. http:/www.asd-stan.org/ 2) Published as A
15、SD-STAN Technical Report at the date of publication of this standard. http:/www.asd-stan.org/ 3) Published by: DoD National (US) Mil. Department of Defense. http:/www.defenselink.mil/ prEN 4531-101:2014 (E) 4 3 Termini dimensions See Figure 1. Dimensions and tolerances are in millimetres. Dimensions
16、 of t1, t2, c and d of Figure 1 are detailed Table 1. Key 1 Ferrule 2 Flange 3 Chamfer or radius 0,05 min./0,2 max. Figure 1 Table 1 EN 4531- Cable Optical fibre type Outer diameter c d t1t2micrometre mm m m m m 101 EN 4641-xxx 62,5/125 or 50/125 1,8 0,1 3 127 1 3 prEN 4531-101:2014 (E) 5 4 General
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASDSTANPREN45311012014AEROSPACESERIESCONNECTORSOPTICALCIRCULARSINGLEANDMULTIPINCOUPLEDBYTRIPLESTARTTHREADEDRINGFLUSHCONTACTSPART101OPTICALCONTACTFOREN46PDF
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-453223.html