ARMY UFGS-09 51 00-2010 ACOUSTICAL CEILINGS.pdf

《ARMY UFGS-09 51 00-2010 ACOUSTICAL CEILINGS.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-09 51 00-2010 ACOUSTICAL CEILINGS.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-09 51 00 (August 2010)-Preparing Activity: USACE SupersedingUFGS-09 51 00 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 51 00ACOUSTICAL CEILINGS

2、08/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Fire Resistive Ceilings1.2.2 Ceiling Attenuation Class and Test1.2.3 Ceiling Sound Absorption1.2.4 Light Reflectance1.2.5 Other Submittals Requirements1.3 SUBMITTALS1.4 SUSTAINABLE DESIGN CERTIFICATION1.5 DELIVERY, STORAGE. AND HANDLING1.6

3、 ENVIRONMENTAL REQUIREMENTS1.7 SCHEDULING1.8 WARRANTY1.9 EXTRA MATERIALSPART 2 PRODUCTS2.1 ACOUSTICAL UNITS2.1.1 Affirmative Procurement2.1.2 Units for Exposed-Grid System A _2.1.3 Units for Concealed-Grid System A _2.1.4 Metal Pans A _2.1.5 Impact/Abrasion Resistant Units2.1.6 Humidity Resistant Co

4、mposition Units2.1.7 Metal Faced Composition Units2.1.8 Unit Acoustical Absorbers2.2 SUSPENSION SYSTEM2.3 HANGERS2.3.1 Wires2.3.2 Straps2.3.3 Rods2.3.4 Eyebolts2.3.5 Masonry Anchorage Devices2.4 ACCESS PANELSSECTION 09 51 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted

5、without license from IHS-,-,-2.5 ADHESIVE2.6 FINISHES2.7 COLORS AND PATTERNS2.8 ACOUSTICAL SEALANTPART 3 EXECUTION3.1 INSTALLATION3.1.1 Suspension System3.1.1.1 Plumb Hangers3.1.1.2 Splayed Hangers3.1.2 Wall Molding3.1.3 Acoustical Units3.1.4 Caulking3.1.5 Adhesive Application3.2 CEILING ACCESS PANE

6、LS3.3 CLEANING3.4 RECLAMATION PROCEDURES- End of Section Table of Contents -SECTION 09 51 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09 51 00 (August 2010)-Preparing Activity: USACE SupersedingUFGS-0

7、9 51 00 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION 09 51 00ACOUSTICAL CEILINGS08/10*NOTE: This guide specification covers the requirements for conventional and impact/abrasion resistant acoustical ceiling tile and panels, unit a

8、coustical absorbers, hangers, and suspension system grid for installation in commercial-type work.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove informatio

9、n and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designat

10、ion and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*Note: Plaster or gypsum wallboard ceilings, metal faced or ceramic-bonded mineral fiber acoustical ceilings should be used in lieu of mineral fiber, or fi

11、berglass base acoustical ceiling systems, in wet areas such as showers and bathrooms or around grills, in kitchens, and similar facilities where greasy vapors are a problem. Be alert to this fact, however, gypsum board made in other countries may contain asbestos which, of course, is unacceptable.Dr

12、awings should indicate the following:SECTION 09 51 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a. Location of acoustical systems. Arrangement of acoustical units, panels, light fixtures, and diffusers, other penetrations and exposed susp

13、ension grids.b. Location of systems required to have ceiling attenuation class (CAC).c. Location and details of system required to have a fire resistive rating.d. Location and details and material of fire stops above suspended ceilings.e. Location and details of access panels and maximum spacing of

14、suspension members for concealed grid suspension systems.f. Location of each different color and pattern when more than one type acoustical unit is specified for a project. Details of special or patterned panels if necessary to describe adequately. If more than one system is used, key to locations b

15、y using symbols.g. Where acoustical ceilings are provided in conjunction with thermal insulation beneath vented attic spaces, careful attention should be given to furnishing the appropriate type ceiling tile, adequate details on the contract drawings, and to including appropriate sections in the spe

16、cifications. Details on the drawings will cover such features as support of insulation at flush-mounted light fixtures, conduit, acoustical units, suspension system components, heating and air-conditioning units, and other utilities. Installation of insulation over the suspension systems, light fixt

17、ures, and other ceiling penetrations will be coordinated with Sections 06 10 00 ROUGH CARPENTRY and 07 21 13 BOARD AND BLOCK INSULATION, and manufacturers literature.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications a

18、re referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article

19、. Also use the Reference Wizards Check Reference feature to update the issue dates.SECTION 09 51 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-References not used in the text will automatically be deleted from this section of the project s

20、pecification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM A 1008/A 1008M (20

21、09a) Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake HardenedASTM A 167 (1999; R 2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Pl

22、ate, Sheet, and StripASTM A 489 (2004e1) Standard Specification for Carbon Steel Lifting EyesASTM A 580/A 580M (2008) Standard Specification for Stainless Steel WireASTM A 641/A 641M (2009a) Standard Specification for Zinc-Coated (Galvanized) Carbon Steel WireASTM A 653/A 653M (2009a) Standard Speci

23、fication for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip ProcessASTM B 633 (2007) Standard Specification for Electrodeposited Coatings of Zinc on Iron and SteelASTM C 423 (2009a) Sound Absorption and Sound Absorption Coefficients by the Reverberation

24、 Room MethodASTM C 635/C 635M (2007) Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel CeilingsASTM C 636/C 636M (2008) Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In PanelsASTM C 834 (2010) L

25、atex SealantsASTM E 119 (2009c) Standard Test Methods for Fire Tests of Building Construction and MaterialsSECTION 09 51 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM E 1264 (2008) Acoustical Ceiling ProductsASTM E 1414 (2006) Airborn

26、e Sound Attenuation Between Rooms Sharing a Common Ceiling PlenumASTM E 1477 (1998a; R 2008) Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere ReflectometersASTM E 580/E 580M (2009a) Application of Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels in Are

27、as Requiring Moderate Seismic RestraintASTM E 795 (2005) Mounting Test Specimens During Sound Absorption TestsASTM E 84 (2010) Standard Test Method for Surface Burning Characteristics of Building MaterialsGREENGUARD ENVIRONMENTAL INSTITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsSCIEN

28、TIFIC CERTIFICATION SYSTEMS (SCS)SCS Scientific Certification Systems (SCS)Indoor AdvantageU.S. DEPARTMENT OF DEFENSE (DOD)UFC 3-310-04 (2007; Change 1) Seismic Design for BuildingsUNDERWRITERS LABORATORIES (UL)UL Fire Resistance (2010) Fire Resistance Directory1.2 SYSTEM DESCRIPTION*NOTE: When refl

29、ected ceiling plans showing ceiling penetrations are included in the project drawings, it may not be necessary for the Contractor to re-draw and submit as a shop drawing; in such cases, delete the requirement from SD-02. Details not applicable to the project should also be deleted. On simple project

30、s where manufacturers standard printed data are sufficient, omit this submittal category from SD-03.Where many different ceiling systems are used, it may be more convenient to schedule STC ratings, fire ratings, panel and suspension types on the drawings, keyed to finish schedules, rather than to in

31、clude this data in the specification.SECTION 09 51 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*Provide sound controlling units mechanically mounted on a ceiling suspension system for acoustical treatment. The unit size, texture, finish,

32、 and color must be as specified. The Contractor has the option to substitute inch-pound (I-P) Recessed Light Fixtures (RLF) for metric RLF. If the Contractor opts to furnish I-P RLF, other ceiling elements like acoustical ceiling tiles, air diffusers, air registers and grills, shall also be I-P prod

33、ucts. Coordinate the whole ceiling system with other details, like the location of access panels and ceiling penetrations, etc., shown on the drawings. The Contractor is responsible for all associated labor and materials and for the final assembly and performance of the specified work and products i

34、f I-P products are used. The location and extent of acoustical treatment shall be as shown on the approved detail drawings. Submit drawings showing suspension system, method of anchoring and fastening, details, and reflected ceiling plan. Coordinate with paragraph RECLAMATION PROCEDURES for reclamat

35、ion of mineral fiber acoustical ceiling panels to be removed from the job site.1.2.1 Fire Resistive Ceilings*NOTE: Certified laboratory test reports for fire resistance rating and ceiling attenuation class (CAC) cannot be obtained for ceiling assemblies which are nonstandard with the manufacturer. T

36、herefore, where a fire resistance rating and/or ceiling sound transmission class are necessary, do not specify a nonstandard ceiling assembly. Refer to data in the UL Fire Resistance Directory for details.For Navy projects, delete this paragraph when fire separation is not required by Mil HDBK-1008,

37、 Fire Protection for Facilities Engineering, Design, and Construction. Where required, rating applies to total floor-ceiling or roof-ceiling assembly, including mechanical-electrical elements, penetrations, structural system, and deck. If system is required to be fire-endurance rated, show details o

38、f recessed fixture enclosures and other penetrations on drawings.*Rate acoustical ceiling systems, indicated as fire resistant, for fire endurance as specified when tested in accordance with ASTM E 119. Test suspended ceiling with a specimen roof floor assembly representative of the indicated constr

39、uction, including mechanical and electrical work within ceiling space openings for light fixtures, and air outlets, and access panels. Provide ceiling assembly rating for 1 1-1/2 2 3 4 hour concealed grid system exposed grid system as shown on drawings. Provide acoustical units with a flame spread o

40、f 25 or less and smoke development of 50 or less when tested in accordance with ASTM E 84.1.2.2 Ceiling Attenuation Class and Test*NOTE: Ensure that CAC rating chosen is coordinated with rating of walls detailed on the drawings. It SECTION 09 51 00 Page 7Provided by IHSNot for ResaleNo reproduction

41、or networking permitted without license from IHS-,-,-is inappropriate to have high CAC rating for ceilings if walls nullify acoustical benefit.Where room partitions do not extend to floor or roof deck above, ceiling plenum path may prevent acoustical privacy between rooms. Where required to provide

42、adequate room to room sound attenuation, entire ceiling assembly, including air terminals and light fixtures, should have appropriate Ceiling Attenuation Class (CAC). Any penetration of ceiling assembly will destroy integrity of ceiling in this regard. Verify that other specification sections and dr

43、awings include appropriate data to ensure that these requirements are met for air terminals and light fixtures. For standard applications, specify CAC range of 35 - 39. A ceiling CAC range of 40-44 is recommended for all spaces where speech privacy is required and that are surrounded or sub-divided

44、by partitions which do not extend to underside of floor or roof deck above. For classified conference rooms, executive offices, teleconferencing rooms and other occupancies requiring the highest degree of speech privacy, sound attenuation requirements will have to be achieved by other means, most likely by high sound transmission class (STC) partition extending to the underside of floor or roof deck above.*Provide a ceiling system with an attenuation class (CAC) of _ for _ and _ for _ when determined in accor