ARMY MIL-T-43641-1969 TABLE EMBALMING MORTUARY《尸检防腐台》.pdf

《ARMY MIL-T-43641-1969 TABLE EMBALMING MORTUARY《尸检防腐台》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-T-43641-1969 TABLE EMBALMING MORTUARY《尸检防腐台》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、. I _ . I ./ , MILITARY SPECIFICATION MIL-T-43641 6 Ma.y 1969 TABLES, EMEAIMING, MORTtJARY This specification is mandatory for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope.- This specification covers two types of mortuary embalming tables (see 6.1). 1.2 Classi

2、fication.- Tables shall be of the following tmes, as speci- fied (see 6.2). Type I - Nonhydraulic operated Type II - Hydraulic operated 2. APPIIICABL;E DOCUMENTS 2.1 The following documents, of the issue in effect on date of Invitation for bids or request for proposal, form a part of this specificat

3、ion to the extent specified herein: SPECIFICATIONS MMM-A- 2 60 TPP-B-601 PPP-B - 62 1 p-B-636 PPP-B-1055 PPP-C-843 PPP-F-320 PPP-T - 97 Adhesive, Water-Resistant, (For Sealing Water- Box, Wood, Cleated-Plywood Box, Wood, Nailed and Lock-Corner Box, Fiberboard Barrier Material, Waterproof ea, Flexibl

4、e Cushioning Material, Cellulosic Fiberboard, Corrugated and Solid Sheet Stock Tape, Pressure-Sensitive Adhesive, Filament Re- proofed Paper) (Container Grade) and Cut Shapes inf orced Licensed by Information Handling ServicesMIL-T-43641 77 7797706 03752C8 1 M - _MIL- T - 43 64 1 STANDARDS MIIXTARY

5、MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. MIL-STD-l29 - Marking for Shipment and Storage. (Copies of specifications, standards, and drawings required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as d

6、irected by the contracting officer.) 2.2 Other publications.- The following documents form a past of this specification to the extent specified herein. Unless otherwiseindicated, the issue in effect on date of invitation for bids or request for proposai shall apply. AMERICAN SOCIETY FOR TESTING AND

7、MATERIAIS (ASTM) A 1-67-63 - Corrosion-Resicking Chromium- Wickel Skeel Plahe, _Sheet and Strip. B 210-65 - .Aluminum Alloy, Drawn Seamless Tubes. (Applications for copies of the American Society fo? Testing and, Materials, standard specifications should be addressed to the American Society for Test

8、ing and Materials, 1916 Race Street, Philadelphia, Pa., 19103 1 NATIONAL CLASSIFICATION BOARD National Motor Freight Classification (Application for copies should be addressed to the National Classification Board, 1616 P Street, N.W., Washington, D. C. 20036. ) UNIFORM CLASSIFICATION COMMITTEE Unifo

9、rm :Freight Classif ication (Application for copies should be addressed to the Uniform Classification Committee, 202 Union Station, Chicago, Ill. 60606.) (Technica.1 soziety a.rid technical associakion specificahions and standards am generally ava.llable for reference from libraries. distributed amo

10、ng Lechnical groups and using Federal. agencks . ) They are also .- 2 67 Licensed by Information Handling ServicesMIL-T-43641 3. REQUIREMENTS 3.1 First article.- When specified (see 6.2), before production is commenced, the supplier shall submit a preproduction sample to the con- tracting officer or

11、 his authorized representative for azproval in accordance with 4.2. The approval of the preproduction sample authorizes the commencement of production, but does not relieve the supplier of respon- sibility for compliance with all applicable provisions of this specifica.tion. The preproduction sample

12、 shall be manufactured in the same facilities to be used forthe manufacture of the production item. 3.2 Standard product. - The tables delivered under this specification shall be the.manufacturers current commercial product, except for any changes necessary .to comply with specification requirements

13、. 3.3 Ma.terials.- Materials not definitely specified shall be of the quality normally used by the manufacturer for embalmingtables, provided the completed item complies with all provisions of this specification. 3.3.1 Corrosion-resisting steel. sheet.- Corrosion-resisting steel sheet shall conform

14、to type 302 of ASTM A 167-63 and shall be a minimum 0.0355 inch thick. 3.3.2 Aluminum Tube.- Aluminum tube shall conform to 6063-822 of The diameter of the tube shall be in accordance with the ASTM B 2iO. mmuf acturer s current commercial practice. 3.4 Design.- The embalming tables shall conform to

15、the requirements specified herein and in table I. top mounted on a, tubular frame and equipped with casters. table shall be similar to figure 1. tilting and swiveling table top, mounted on a single pier base, containing a hydraulic mechanism, equipped with casters The type I table, when tested as sp

16、ecified in 4.4.1, and the type II table, when tested as speci- fied in 4.4.2, shall show no evidence of warping, cracking or deformation. Type 1 table shall consist of a reinforced The type II table shall consist of a The* type I 7 -.: 3 Licensed by Information Handling ServicesMIL-T -43641 TABU I.

17、- c physical characteristics Minimum Characteristic Requirement ( inches) Type 1 Type TI Length, overall Width Height, unextended ICotal adjustment, each end (type I) Total extension (type 11) 79 79 27 28 31 27- 1/2 7-3 14 10 3.5 Construction.- 3.5.1 Type 1.- 3.5.1.1 Table top.- The table top of the

18、 type I table shall be fabri- cated of corrosion-resisting steel sheet specified in 3.3.1. reinforcing members shall be fabricated of corrosion-resisting steel. table top shall have a. conca.ve drain channel around the outer perimeter, connected to a. drain hole at the center ofthe foot end. A bucke

19、t hook shall be permanently attached adjacent to the drain hole, and shall not become deformed when tested as specified in 4.4.3. on both ends of the table to raise and lower the table top within the limitations specified in table L. The method used shall assure positive locking action and shall not

20、 malfunction or become deformed when tested as specified in 4.4.1. Table top The Means shall be provided 3.5.1.2 Frame.- The frame of the type I table shall be fabricated of - the aluminum tube specified in 3.3.2. provided with means to receive casters. The bottom of the frame shall be 3.5.13 Caster

21、s.- Casters for the type I table sha.11 be not less than 7 inches inxer by 1-1/2 inches wide, semi-pneumatic, ball beasring type. Each caster shall haxe a. load rarting of not less than 125 pounds. Casters shall be provided with caster locks to bobolize the table when tested as specified in 4.4.1. 3

22、.5.2 Type 11.- 4 Licensed by Information Handling Services3.5.2.3-Table Top.- The table top of the type II table shall be made of reinforced pressed steel, The edges of the top shall form an apron not less than 3 inches deep around the top to form a drain channel. hole shall be located at the center

23、 of the foot of the table. A bucket hook shall be permanently attached adjacent to the drain hole and shall not fracture or become deformed when tested as specified in 4.4.3. tested as specified in 4.4.2, the table top shall tilt down approximately 6 inches at the head end and new vertical at the fo

24、ot end. When tilted, the table top shall swivel 360 degrees. be provided for the tilt -and swivel mechanism. A drain When A positive means of locking shall 3.5.2.2 - Base.- The singlepier base shall be made of cast iron and shall contain a hydraulic mechanism. When tested as specified in 4.4.2, the

25、base shall not tip and -the hydraulic mechanism shall saise and lower the table top within the limitations specified in table 1 without slipping, The hydraulic mechanism shall be furnished with a foot or hand release and yump valve or lever. The casters shall be moisture and acid resistant, non-mark

26、ing arid of the ball bearing type. Nearis shall be provided to lock the casters in position when -tested -as specified in 4.4.2. edge of the table rests attached in accordance with industry practice. The base shall bemounted on concealed casters. The base shall not extend beyond the The base shall b

27、e equipped with chromium plated foot 3.5.2.3 Water attachment.- A water attachment shall be furnished with the type II table to provide a constant flow of water to the table. attachment shall be made of corrosion-resisting material and furnished with a clamping device or other means of arttachment t

28、o the table. The 3.6 .Fjnish.- 3.6.1 Finish for type 1 table, - Corrosion-resisting steel components shall have a smooth, natural finish, equivalent to a No. 3 sheet finish or better. Alumin, tJfwd 1)r rilul.lo.7Ilcd. Sco 1 c, :m i lux rio I; rcamovcd rorri WC.llS (J3 UPPLCJC1kl.c) Missing or not as

29、 specified. 7 X X X X X X X x . _ ;! Licensed by Information Handling Services MIL-T-43641 77 7997906 0395264 7 W MIET-43641 TABLE II.- Visual examination (contd) Classification Examine Defect Major Minor Marking Not marked as specified, marking illegible. X 4.3.3.2 Dimensional examination.- Examina

30、tion shall be made of the embalming table for defects in dimensions. specified tolerance shall be classified as a defect. The inspection level shall be S-2 with an AQL of 6.5, expressed in terms of defects per hundred units. Any dimension not within 4.3.3.3 Testing of the end item.- The end item sha

31、ll be tested as specified in 4.4.1 for type I tables, or 4.4.2 for type TI tables, as applicable, and 4.4.3. The inspection level shall be S-2 dd the AQL shall be 4.0, expressed in terms of defects per hundred units. 4.3.4 Examination of preparation foi delivery.- An examination shall bemade to dete

32、rmine that packaging, packing and marking as required by section 5 of this specification are compliedwith. Defects shall be as indicated in table4II. fully prepased for delivery. for inspection at one the. AQL of 4.0, expressed in kerms of defects per hundred units. The sample unit shall be one ship

33、ping container The lot shall be all of the containers offered The inspection level shall be S-2 with an TABLE 111.- Examination of preparation for delivery defects Examination Defect Mwkings, exterior Omitted; incorrect; illegible; mdmproper size, location, .sequence, or method of application. Mater

34、ials Component missing or damaged. Worlnnms hip Inadequate application of components, such as cushioning or blocking and bracing inadequate. 4.3.4.1 Examination of shipping containers. - Examination for defects in closureeand strapping of shipping containers shall be in accordance with the appendix

35、of the applicahle container specificatj un. 8 Licensed by Information Handling ServicesMIL-T-43641 77 W 9797706 0375265 7 MIL-T-43641 k.4 Tests.- 4-4.1. Performance test, type I.- The caster locks of the type I table shall be engaged, and an evenly distributed load of 300 pounds shall be placed on t

36、he assembled table. to each of its locking positions and allowed to remain in each of its locking positions for a period of 5 minutes and then lovered to the lower lMt of adjustment. table. One end of the table top shall be raised The test shall be repeated at the other end of the The table shall be

37、 observed to determine compliance as follows: (a) (b) (e) Adjustability (see 3.5.1). (a) Warping, deformation or cracking (see 3.4). Failure of supporting devices (see 3.5 .i). Failure of caster locks (see 3.5.1.1). 4.4.2 Performance test, type 11.- The casters of the type II table shall be locked.

38、The table top raised to its highest pint of extension and an evenly distributed load-of 300 pounds shall be placed on the table top and secuked. limits of adjustment. The ta,ble top shall be lowered to two intermdiate positions for 5 minutes and then lowered to its lower limit. position the table sh

39、all be rotated 360 degrees. tilting mechanism shall be returned to its original position. shall then be raised to its upper limit. The test shall be repeated, except the foot of the ta,ble shall be lowered to its lower limit. table shall be observed to determine compliance as follows: The head of th

40、e table top shall be tilted to the lower At each At the lower limit the The takle The Warping, deformation or cracking (see 3.4). Jlocking action for tilting and swiveling (see 3.5.2.1). Tilting of the head and foot end (see 3.5.2.1). Tipping of the base (see 3.5.2.2). 0 eration of the hydraulic mec

41、hanism without slipping Failure of caster locks (see 3.5.2.2). (a) (e) (f) psee 3.5.2.2). 4.4.3 Hook test.- A static load of not less than 30 pounds shall be atta.ched=to the drain hole hook for a period of 30 minutes to determine compliance with 3.5.1. 5. PREPARATION POR DEIJVERY 5.1 Packaging.- Pa

42、ckaging shall be level A or C as specified. (see 6.2). 5.1.1 Levei A.- 9 . Licensed by Information Handling ServicesMIL-T-43641 77 m 9779706 O395266 O m MIL-T-43641 5-1.1.1 Disassembly. - Each table shall be disassembled by removing the top and casters from the base. The base of type i table shal1 b

43、e disassembled into its component parts. table shall be disassembled from the table. The water- aktachment of type II 5.1.1.2 Lubricakion. - All bearings shall be lubricated to capaci-ty with the manufacturers recommended lubricant containing a rust inhibitor. 5.1.1.3 Packaging. - 5.1.1.3.1 Ta.ble t

44、op.- The top, sides and ends of each table top shall be covered with minimum 30-pound basis weight (24 by 36-500) highly- calendered or machine-glazed kraft paper. All surfaces of the table top shall then be covered with fiberboard conforming to type CF or SF, class domestic, grade 275, or class wea

45、ther resistant, grade nc or V3s of PPP-F-320, or cellulosic cushioning material conforming to type I or II, class B of YYP-C-843 (see 5-2.1.1). The fiberboard or cushioning material shall be secured with jute, sisal, manila or cotton twine having a minimum breaking strength of 80 pounds, or tape con

46、forming to PPP-T-97, in a manner as to prevent shifting or detachment during shipment. 5.1.1.3.2 Table base.- Tubing similar in size and shape, for type 1 tables, shall be nested and secu-ed together with tape conforming to PPP-T-97. The base of type TI tables shall have all surfaces, except the bot

47、tom, covered with kraft paper and fiberboaxd or cellulosic cushioning material as specified in 5.1.1.3.1- 5.1.1.3.3 Components, hardware and assembly instruction.- Hardware re- moved during disassembly of the table shall be placed in a, cotton cloth drawstring bag and, together with water attachment

48、 for type II table, casters and assembly instructions, shall be packaged in a fiberboard box conforming to type CF or SF, class domestic or weather-resistant, variety SW, style optional of PPP-B-636 (see 5.2.1.1). separated and immobolized by fiberboard inserts, individually wra.pped in c:ishioning

49、makerial conforming to type I or II, class A or B of PPP-C-843, or other equivaient means. Each box shall be securely closed in accordance with Method II of the appendix of PPP-B-636. The components shall be 5-1.2 Level C. - Tables shall be packaged to afford adequate protection a.gainst physical damage during shipment from the supply source to the first receiving activity. The supplier may use his standard practice when it meets this requirement. 5.2 Pucking. - Packing shall be level A, 13 or C 8,s spccified ( see 6.2). f %* ! I i.L.1. Level A.-