ARMY MIL-DTL-3628 18 M-2012 BADGE QUALIFICATION CLASPS EXPERT RIFLE AND PISTOL MARINE CORPS.pdf

《ARMY MIL-DTL-3628 18 M-2012 BADGE QUALIFICATION CLASPS EXPERT RIFLE AND PISTOL MARINE CORPS.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3628 18 M-2012 BADGE QUALIFICATION CLASPS EXPERT RIFLE AND PISTOL MARINE CORPS.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, CLASPS, EXPERT RIFLE AND PISTOL, MARINE CORPS This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist

2、of this specification sheet and the latest issue of MIL-DTL-3628. PISTOL Textured background RIFLE MATERIAL: Red Brass, 85/15 (UNS Alloy No.C-230) Nickel Silver or Zinc Aluminum FINISH: 1.Red Brass 85/15(UNS Alloy No. C-230): and Nickel Silver, Nickel Plated ,Mirror-like Polished and shall match The

3、 Institute of Heraldry (TIOH) Metal Finish Chip Number 16 except Textured Background Areas which shall be lightly Polished. . 2. Zinc Aluminum: Copper Plated, Nickel Plated, Mirror-like Polished and shall match TIOH Metal Finish Chip Number 16 except Textured Background Areas which shall be lightly

4、Polished. INCH-POUND MIL-DTL-3628/18M 10 December 2012 SUPERSEDING MIL-DTL-3628/18L 15 November 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/18M 2 of 3 DASH NO. -1: 2nd Award,Rifle -5: 2nd Award,Pistol -2: 3rd Award, Rifle -6: 3r

5、d Award, Pistol -3: 4th Award, Rifle -7: 4th Award, Pistol -4: 5th Award, Rifle -8: 5th Award, Pistol -9: 6th Award, Rifle -14: 6th Award, Pistol -10: 7th Award, Rifle -15: 7th Award, Pistol -11: 8th Award, Rifle -16: 8th Award, Pistol -12: 9th Award, Rifle -17: 9th Award, Pistol -13: 10th Award, Ri

6、fle -18: 10th Award, Pistol -19: 11th Award, Rifle -39: 11th Award, Pistol -20: 12th Award, Rifle -40: 12th Award, Pistol -21: 13th Award, Rifle -41: 13th Award, Pistol -22: 14th Award, Rifle -42: 14th Award, Pistol -23: 15th Award, Rifle -43: 15th Award, Pistol -24: 16th Award, Rifle -44: 16th Awar

7、d, Pistol -25: 17th Award, Rifle -45: 17th Award, Pistol -26: 18th Award, Rifle -46: 18th Award, Pistol -27: 19th Award, Rifle -47: 19th Award, Pistol -28: 20th Award, Rifle -48: 20th Award, Pistol -29: 21st Award, Rifle -49: 21st Award, Pistol -30: 22nd Award,Rifle 50: 22nd Award,Pistol -31: 23rd A

8、ward, Rifle -51: 23rd Award,Pistol -32: 24th Award, Rifle -52: 24th Award, Pistol -33: 25th Award, Rifle -53: 25th Award, Pistol -34: 26th Award, Rifle -54: 26th Award, Pistol -35: 27th Award, Rifle -55: 27th Award, Pistol -36: 28th Award, Rifle -56: 28th Award, Pistol -37: 29th Award, Rifle -57: 29

9、th Award, Pistol -38: 30th Award, Rifle -58: 30th Award, Pistol DIMENSIONS: HEIGHT (Including Lugs): -1 thru -4, -9 thru -13, -19 thru -38: 1/2 inch (REF) -5 thru -8, -14 thru -18, -39 thru -58: 7/16 inch (REF) WIDTH (Overall): -1 thru -4, -9 thru -13,-19 thru -38: 1-33/64 inches (REF) -5 thru -8, -

10、14 thru -18,-39 thru -58: 1-5/32 inches (REF) THICKNESS (At Edge): 0.065 inch + .005 inch LUGS & LINKS: 1. Two links shall be positioned on top lugs and shall use the same material and finish as the badge clasp. 2. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in length and

11、 shall be fabricated from 0.044 inch + 0.005 inch diameter wire. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/18M 3 of 3 3. Lugs shall be located equidistant from each end. The distance, center to center of the lugs, shall be as follo

12、ws: -1 thru -4,-9 thru -13,-19 thru -38: 13/16 inch + 1/64 -5 thru -8,-14 thru -18,-39 thru -58: 5/8 inch + 1/64 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. All badge clasps are of identical design except for lettering. 3. Requalification cl

13、asps covered by this specification sheet shall be used in conjunction with the basic badges on specification sheets MIL-DTL-3628/16 and MIL-DTL-3628/17 as applicable. 4. Badge may be rhodium plated with a mirror-like polished finish which shall match the TIOH Metal Finish Chip Number 16 at the optio

14、n of the manufacturer. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy - MC Review activity: (Project No. 8455-2013-007) DLA

15、 - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-