ARMY MIL-B-44381-1990 BOARD MAP COMPLEXING (SICPS)《配合图板(SICPS)》.pdf

《ARMY MIL-B-44381-1990 BOARD MAP COMPLEXING (SICPS)《配合图板(SICPS)》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-B-44381-1990 BOARD MAP COMPLEXING (SICPS)《配合图板(SICPS)》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、+: - - R NIL-B-4Ll381 71 W 7777906 0230777 2 I INCH-POUND I MIL-B-44381 (GL) 5 February 1990 MILITARY SPECIFICATION BOARD, MAP, COMPLFXING (SICPS) This specification is approved for use by the Natick Research, Developnent and Engineering Center, Department of the Army, and is available for use by al

2、l Depariments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers a complexable map board. 2. APPLICABLE DOCUMENTS 2.1 Govertment documents. 2.1.1 Specification, standards, and handbooks. The following specifications, standards, and handbooks form a part of this

3、document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL L-P-375 - P

4、lastic Film, Flexible, Vinyl Chloride NN-P-530 - Plywood, Flat Panel PPP-B-601 - Boxes, Wood, Cleated Plywood PPP-B-636 - Boxes, Shipping, Fiberboard distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-qLl3L 71 999999b 02

5、309O 7 MIL-E44381 (GL) . STANDARDS MILITARY MIL-ST-105 - Sampling Pxocedures and Tables for Inspection by MIL-STD-129 - Marking for Shipnent and Storage MIL-STD-130 - Identification Marking of U.S. Military Property Attributes (Unless otherwise indicated, copies of federal and military specification

6、s, standards and handbooks are available fran the Standardization Docunents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2,1,2 %her Govertment documents, drawings, and publications. The following other Goverment documents, drawings, and publications form a part of this doc

7、ument to the extent specified herein. issues are those cited in the solicitation. Unless otherwise specified, the DRAWINGS UaS, ARMY NATICK RESEARCH, DEVELOPMENT, AND ENGINEERING CENTER 5-4-7457 - Mapimard Assembly 5-4-7461 - Mapboard (Copies of drawings are available fran the U.S. Anxiy Natick Rese

8、arch, Development, and mineering Center, AT.TN: STRNC-ENIS, Natick, MA 01760-5014.) 2,2 Non-Govermnt publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in th

9、e issue of the docmnts cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the docunents cited in the solicitation (see 6.2). AMERICAN SOCIETY M)R TESTING AND MATERIALS (MIM) D 3935 - Polycarbonate (E) Unfilled incorrect; illegibl

10、e; of improper size, location, sequence, or metho of application Materials Any canponent missing, damaged, or not as specif ied Workmanship Inadequate application of caaponents, such as: Bulged or distorted container incanplete sealing or closure of flap, improper taping, loose strapping or inadequa

11、te stapling Content Ntsnber per container ismore or less than required 5. PACKAGING 5.1 Preservation. Preservation shall be level A or Carniercial as specified (se 6.2). 5.1.1 Level A preservation. Fach map board shall be placed within a close The inside dhnsions of each box shall approximate 60-1/2

12、 inches fitting fbrboard box conforming to style OPF, type CF, grade 200 of PPP43-636, by 27 inches by 2-3/4 inches. Each box shall be closed in accordance With PPP-B-636 5.1.2 Caimercial preservation. Canponents of each frame shall be preserved in accordance with ASTM D 3951. 5.2 Packing. Packing s

13、hall be level A, B or Carmercial as specified (See 6.2)* 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* - MIL-B-LlLl3BL 71 7979706 0230785 8 W MIL-E44381 (GL) 5.2.1 Level A packing. Ten map boards, preserved as specified in 5.1, shall be packed

14、in a close fitting, cleated plywood shipping container conforming to overseas type, style A of PPP-B-O. approximate 61-1/2 inches in length, 28 inches in width, and 27-1/2 inches in depth. strapping in accordance with te appendix of PPP-B-601. Inside dimensions of the box shall Each shipping contain

15、er shall be skidded, closed and reinforced with 5.2.2 Level B packing. Ten map boards, preserved as specified in 5.1, shall Inside dimensions of the box shall be packed in a close fitting, cleated plywood shipping container conforming to domestic type, style optional of PPP-B-601. approximate 61-1/2

16、 inches in length, 28 inches in width, and 27-1/2 inches in depth. strapping in accordance with the appendix of PPP-B-601. Each shipping container shall be skidded, closed and reinforced with 5.2.3 Ccrisnercial packing. Map boards preserved as specified in 5.1, shall be packed in accordance with AST

17、M D 3951. 5.3 Marking, In addition to any special marking required by the contract or purchase order, unit packs and shipping containers shall be marked in accordance with MIL-STD-129 or ASTM D 3951, as applicable. 6. NOTES (This section contains information of a general or explanatory nature that m

18、ay be helpful, but is notmandatory.) 6.1 Intended use. The map board shall provide a -0th flat surface to layout maps, drawings, bulletins, etc, a 6.2 Acquisition requirements. Acquisition documents must specify the f o1 lowi ng : a. Title, nirmber, and date of this specification. b. Issue of DODISS

19、 to be cited in the solicitation, ad if rkired, the C. When a first article is required (see 3.1, 4.3, and 6.3). d. Levels of preservation and packing (see 5.1 and 5,2), specific issue of individual docisnents referenced (see 2.1.1 and 2,2), 6.3 First article. Wen a first article is required, it sha

20、ll be nspcted and approved under the appropriate provisions of FAR 52.209, The first &ick should be a preproduction saniple. appropriate type of first article and the nimber of units to be furnished, Tfme contracting officer should also include specific instructions in acqisltion documents regarding

21、 arrangements for selection, inspection, and approval of the first article. The contracting officer should specify tbs 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-q4381 71 U 934990b 023098b T c MIL-E44381 (GL) 6e4 Subject term (key wrd) listiq. Bulletin Drawing SICPS Tent Preparing activity: Army - GL (Project 719SA105) Custodian: Aq-GL 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-