ANSI UL 60730-2-8-2007 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electrically Operated Water Valves Incl.pdf

《ANSI UL 60730-2-8-2007 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electrically Operated Water Valves Incl.pdf》由会员分享，可在线阅读，更多相关《ANSI UL 60730-2-8-2007 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electrically Operated Water Valves Incl.pdf（65页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-8 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements STANDARD FOR

2、SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Automatic Electrical Controls for Household and Simila

3、r Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements, UL 60730-2-8 Second Edition, Dated February 28, 2007 Summary of Topics These revisions to ANSI/UL 60730-2-8 are based on the second amendment to edition No. 2 of IEC 60730-2-8. Text that

4、 has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. The new and revised requirements are substantially in accordance with Proposal(s) on this subject dated February 3, 2017. All rights reserved. No part of this publication may

5、 be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to,

6、 the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this

7、 Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety

8、agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. MAY 1

9、0, 2017 UL 60730-2-8 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 10, 2017 UL 60730-2-8 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 28,

10、 2007 (Title Page Reprinted: May 10, 2017) 1 UL 60730-2-8 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements The rst edition was titled Standard for Automatic Electrical C

11、ontrols for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements and numbered UL 8730-2-8. First Edition June, 1995 Second Edition February 28, 2007 This ANSI/UL Standard for Safety consists of the Second Edition includi

12、ng revisions through May 10, 2017. The most recent designation of ANSI/UL 60730-2-8 as an American National Standard (ANSI) occurred on May 10, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or Preface. The National Difference Page and IEC Foreword

13、 are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs

14、Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABO

15、RATORIES INC. ANSI/UL 60730-2-8-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 10, 2017 UL 60730-2-8 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CO

16、NTENTS Preface (UL) 6 NATIONAL DIFFERENCES . 7 FOREWORD 8 1 Scope and normative references .11 1.5 Normative references 12 2 Denitions 12 2.2 Denitions of types of control according to purpose 13 2.3 Denitions relating to the function of controls .14 2.13 Miscellaneous denitions 16 3 General require

17、ments 16 4 General notes on tests .16 4.1 Conditions of test 16 4.2 Samples required 16 5 Rating 16 6 Classication 16 6.5.2 According to degree of protection provided by enclosures against harmful ingress of water (see IEC 60529) .16 6.7 According to ambient temperature limits of the SWITCH HEAD:.17

18、 6.8 According to protection against electric shock: 17 6.101 According to type of end-connections 18 6.102 According to features of electrically operated WATER VALVES 18 6.103 According to temperature, pressure and type of the water controlled 19 6.104 According to NOMINAL SIZE and thread size of E

19、ND CONNECTIONS 20 7 Information 20 7.4 Additional requirements for marking .22 8 Protection against electric shock .23 9 Provision for protective earthing .23 9.5.101DV.1 Swimming pool VALVE 23 10 Terminals and TERMINATIONS .24 10.1 Terminals and TERMINATIONS for external copper conductors .24 10.2

20、Terminals and TERMINATIONS for INTERNAL CONDUCTORS 24 11 Constructional requirements 24 11.3 Modication: .24 11.101 Separation of wetted parts from electrical parts 25 11.102DV.1 Springs .25 11.103DV.1 Metal parts .25 11.104DV.1 Threaded fasteners 26 12 Moisture and dust resistance .26 13 Electric s

21、trength and insulation resistance .26 14 Heating 26 15 MANUFACTURING DEVIATION and DRIFT 28 16 Environmental stress 28 16.2 Environmental stress of temperature 28 17 Endurance .28 17.7 Over-voltage (or in some countries, overload) test of AUTOMATIC ACTION at accelerated rate .29 17.16 Test for parti

22、cular purpose controls 30 MAY 10, 2017 UL 60730-2-8 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 18 Mechanical strength .30 18.101.1 Test at 1,5 times maximum rated working pressure (test for external leakage) . . .30 18.101.2 Test at 5

23、times maximum rated working pressure (hydrostatic strength test) .31 18.101.3 Anti-WATER HAMMER characteristics .31 18.101.4 Test on VALVE BODIES of thermoplastic material 32 18.102 Wetted material specications .33 18.103 Torque 33 19 Threaded parts and connections 34 20 CREEPAGE DISTANCES, CLEARANC

24、ES and distances through insulation .34 21 Resistance to heat, re and tracking 35 22 Resistance to corrosion 35 23 Electromagnetic compatibility (EMC) requirements emission 35 24 Components .35 25 Normal OPERATION 35 26 Electromagnetic compatibility (EMC) requirements immunity .35 27 Abnormal OPERAT

25、ION .35 27.2 Burnout test .35 27.3 Overvoltage and undervoltage test .37 27.101 Dry condition test 38 27.102 Running overload 38 28 Guidance on the use of ELECTRONIC DISCONNECTION 39 Figures Annexes Annex H (normative) Requirements for ELECTRONIC CONTROLS H.6 Classication 39 H.6.18 According to soft

26、ware class 39 H.7 Information 39 H.26 Electromagnetic compatibility (EMC) requirements immunity .40 H.26.5 Voltage dips and voltage interruptions in the power supply network 40 H.26.6 Not applicable. .40 H.26.8 Surge immunity test 40 H.26.9 Electrical fast transient/burst immunity test .40A H.26.11

27、Electrostatic discharge test 40B H.26.12 Radio-frequency electromagnetic eld immunity .40B H.26.13 Test of inuence of supply frequency variations .40C H.26.14 Power frequency magnetic eld immunity test .40D Annex AA (informative) Relation between different ow coefficients AA.1 K v value 40E AA.2 C v

28、 value 40E MAY 10, 2017 UL 60730-2-8 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex BB (normative) Arrangement for the measurement of TRANSIENT PRESSURES caused by WATER VALVES Annex CC (normative) Test on VALVE BODIES of thermoplast

29、ic material intended to be connected to the water supply mains Annex DD (normative) Torque DD.1 Torque test for VALVES with internally threaded end-connections to ISO 7-1 45 DD.1.1 General 45 DD.1.2 Torque test 45 DD.2 Torque test for VALVES with internally threaded end-connections to ISO 228-1 .47

30、DD.3 Torque test for VALVES with internally threaded end-connections with ISO metric thread for compression FITTINGS .48 DD.3.1 Olive type compression FITTINGS .48 DD.3.2 Flared compression FITTINGS 48 DD.4 Torque test for VALVES with externally threaded end-connections to ISO 7-1 .48 DD.5 Torque te

31、st for VALVES with external threaded end-connections to ISO 228-1 or to ISO metric thread for compression FITTINGS 48 DD.6 Torque test for VALVES with adaptors .48 DD.7 Torque test for VALVES with internally or externally threaded end-connections for NPT thread .49 DD.8 Torque test for VALVES with i

32、nternally or externally threaded end-connections for SAE thread .49 Annex EE (normative) Arrangement for the measurement of TRANSIENT PRESSURES caused by WATER VALVES with a declared pressure of up to and including 1,0 MPa (10 bar) Annex 8.DVA Manufacturing and Production Tests (normative) FEBRUARY

33、28, 2007 UL 60730-2-8 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard 60730-2-8, Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric

34、ally Operated Water Valves, Including Mechanical Requirements, is to be used in conjunction with the fourth edition of UL 60730-1. Consideration may be given to future editions of UL 60730-1. The requirements for electrically operated water valves are contained in this part 2 Standard and UL 60730-1

35、. This edition has been issued to satisfy UL Standards policy. Requirements of this part 2 Standard, where stated, amend the requirements of UL 60730-1. Where a particular subclause of UL 60730-1 is not mentioned in UL 60730-2-8, the UL 60730-1 subclause applies. The text, gures and tables of IEC Pu

36、blication Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements, IEC 60730-2-8 copyright 2000, its amendment 1 (2002), and its amendment 2 (2015), are used in this Standard with the conse

37、nt of the IEC and the American National Standards Institute (ANSI). These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining

38、to UL 60730-2-8, Standard should be submitted to UL. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. MAY 10, 2017 UL

39、60730-2-8 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotechnical Commission (IEC) Publication 60730-2-8, Automatic Electrical Controls for Household

40、and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements copyright 2000, its amendment 1 (2002), and its amendment 2 (2015), are indicated by notations (differences) and are presented in bold text. There are ve types of National Diffe

41、rences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences whi

42、ch are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical

43、substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard.

44、 DE These are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC tex

45、t: Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacemen

46、t or deletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. MAY 10, 2017 UL 60730-2-

47、8 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-8: Particular requirements for electrically operated water valves, including mech

48、anical requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning st

49、andardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental org