ANSI UL 1637-2017 UL Standard for Safety Home Health Care Signaling Equipment (Fifth Edition).pdf

《ANSI UL 1637-2017 UL Standard for Safety Home Health Care Signaling Equipment (Fifth Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI UL 1637-2017 UL Standard for Safety Home Health Care Signaling Equipment (Fifth Edition).pdf（121页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1637 Home Health Care Signaling Equipment STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL

2、 NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Home Health Care Signaling Equipment, UL 1637 Fifth Edition, Dated September 21, 2017 Summary of Topics This new edition of the Standard for Safety for Home Health Care Signaling Equipment,

3、 ANSI/UL 1637, includes the following changes in requirements: 1. Charging Current Test 2. Cord-Connected Equipment The revised requirements are substantially in accordance with Proposal(s) on this subject dated March 17, 2017. Text that has been changed in any manner or impacted by ULs electronic p

4、ublishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL pr

5、ovides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including los

6、s of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid fo

7、r this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error

8、 or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. SEPTEMBER 21, 2017 UL 1637 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 21, 2017 UL 1637 tr2 No Text on This PageUL

9、 COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL September 21, 2017 1 UL 1637 Standard for Home Health Care Signaling Equipment First Edition May, 1989 Second Edition November, 1993 Third Edition October, 1998 Fourth Edition December, 2006 Fift

10、h Edition September 21, 2017 This ANSI/UL Standard for Safety consists of the Fifth Edition. The most recent designation of ANSI/UL 1637 as an American National Standard (ANSI) occurred on September 21, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages and Title P

11、age. Any other portions of this ANSI/UL standard that were not processed in accordance with ANSI/UL requirements are noted at the beginning of the impacted sections. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via

12、a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding

13、those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 1637-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1

14、637 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .8 2 Components 9 3 Units of measurement .9 4 Undated references .9 5 Glossary 10 6 Installation and Operating Instructions 11 CONSTRUCTI

15、ON ASSEMBLY 7 General .13 7.1 General 13 7.2 Adhesives used to secure conductive parts .13 7.3 Accessibility of uninsulated live parts 14 7.4 Protection of service personnel 16 8 Enclosures 17 8.1 General 17 8.2 Cast metal 17 8.3 Sheet metal 17 8.4 Nonmetallic .20 8.5 Doors and covers .20 8.6 Enclos

16、ure openings 20 8.7 Screens and expanded metal .25 8.8 Enclosure mounting .26 8.9 Battery compartment (unsealed batteries) 26 9 Corrosion Protection .26 FIELD WIRING 10 Power Supply 27 10.1 General .27 10.2 Field wiring compartment 27 10.3 Terminals (general application) .27 10.4 Terminals (qualied

17、application) 28 10.5 Leads .29 10.6 Cord connected equipment 29 10.7 Permanently connected equipment .30 10.8 Grounding .31 11 Polarity Identication 32 INTERNAL WIRING 12 General 32 13 Wiring Methods .33 14 Separation of Circuits .33 15 Bonding for Grounding 34 16 Secondary (Standby) Power Supply .3

18、6 SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL COMPONENTS 17 General 37 17.1 Mounting of components 37 17.2 Current-carrying parts .38 17.3 Insulating materials .38 17.4 F

19、useholders .39 17.5 Operating mechanisms 39 18 Bushings 39 19 Transformers, Coils, and Relays 40 20 Switches .40 21 Overcurrent Protection 40 22 Printed Wiring Boards .41 23 Capacitors .41 24 Semiconductors 41 25 Storage Batteries .41 SPACINGS 26 General 42 27 Components .43 COMBINATION SYSTEMS 28 G

20、eneral .44 28.1 General .44 28.2 Carbon monoxide signaling systems 44 FCC VERIFICATION 29 General 50 PERFORMANCE ALL UNITS 30 General 50 30.1 Test units and data .50 30.2 Test voltages 51 31 Normal Operation Test 51 32 Electrical Supervision Test .53 33 Power Supply Supervision Test .55 33.1 Battery

21、 powered units .55 33.2 Residential control unit 55 33.3 Central station receiving units 56 34 Electrical Measurements Test 57 34.1 Input circuit 57 34.2 Output circuit 57 34.3 Battery circuit 57 34.4 Circuits connected to specic equipment 58 35 Volt-Ampere Capacity Test, Low-Voltage Power-Limited C

22、ircuits .58 36 Undervoltage Operation Test .60 37 Overvoltage Operation Test 60 SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 38 Jarring Test 60 39 Component Temperature Te

23、st 61 40 Charging Current Test .66 41 Battery Charger Tests .67 42 Variable Ambient Temperature Test .67 43 Humidity Test 67 44 Leakage Current Test .67 45 Overload Test 69 46 Overload Test Separately Energized Units .69 47 Endurance Test 70 48 Electrical Transient Tests 71 48.1 General .71 48.2 Ext

24、ernally induced high-voltage (ring wave surge voltage) transients .71 48.3 Internally induced transients .71 48.4 Input/output (low-voltage) eld-wiring transients 71 49 Dielectric Voltage-Withstand Test .77 50 Abnormal Operation Test 78 50.1 General .78 50.2 Variable autotransformer 78 50.3 Overvolt

25、age .78 51 Strain Relief Test .79 51.1 Flexible cord .79 51.2 Plug restraining 79 51.3 Field-wiring leads .79 52 Drop Test 79 53 Mechanical Strength Tests for Enclosures .80 54 Polymeric Materials Tests 81 54.1 General .81 54.2 Temperature test .81 54.3 Flame test .81 55 Special Terminal Assemblies

26、Test 82 55.1 General .82 55.2 Disconnection and reconnection .82 55.3 Mechanical secureness .82 55.4 Flexing test 83 55.5 Millivolt drop test .83 55.6 Temperature test .83 56 Ignition Test Through Bottom-Panel Openings 84 SIGNAL INITIATING UNITS 57 General 85 58 Vibration Test 85 59 Static Discharge

27、 Test .85 60 Stability Test .86 61 Battery Replacement Test .86 62 Polarity Reversal Test .86 63 Sensitivity and Range Tests 87 64 Photoelectric .87 64.1 Foreign light .87 64.2 Operating speed .87 64.3 Beam cutoff .87 64.4 Range 87 SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 5U

28、L COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MOVEMENT DETECTORS 65 Microwave .88 65.1 General .88 65.2 Sensitivity .88 65.3 Range 89 65.4 Maximum power density 89 66 Sonic and Ultrasonic 89 66.1 General .89 66.2 Sensitivity .89 66.3 Range

29、90 67 Passive Infrared 90 67.1 General .90 67.2 Sensitivity .90 67.3 Stability .90 67.4 Range 91 68 Multiplex Systems 91 68.1 General .91 68.2 Operation .91 68.3 Private radio facilities .92 69 Digital Communicator Units 93 70 Program-Controlled Units and Systems 93 70.1 General .93 70.2 Program acc

30、ess and control .93 SHORT RANGE RADIO FREQUENCY DEVICES 71 General 94 72 Reference Level Determination .94 72.1 Method 1 94 72.2 Method 2 96 72.3 Method 3 99 73 Interference Immunity .99 74 Frequency Selectivity 100 75 Time to Report Alarm 101 76 Inoperative Transmitter Reporting 101 77 Clash 101 78

31、 Error (Falsing) Rate 102 79 Throughput Rate 103 80 Maximum Duration of Transmission 104 81 Battery Status Indication 104 82 Transmitter Stability Tests 105 83 Transmitter Accelerated Aging Test 105 84 Installation Instructions and User Manual .106 MANUFACTURING AND PRODUCTION LINE TESTS 85 Producti

32、on-Line Dielectric Voltage-Withstand Test .106 86 Production-Line Grounding Continuity Test .107 MARKING 87 General 107 SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SUPPLE

33、MENT SA - INSTRUCTIONS FOR CALCULATING ATTENUATION PARAMETERS AND OPEN AREA TEST DISTANCE (D EOAT ) SA1 Instructions for Determining L1, L2, L3, and L4 Values .SA1 SA2 Determining L w SA1 SA3 Determining L f .SA1 SA4 Determining L b SA2 SA5 Determining D EOAT .SA2 SA6 Example Calculation .SA2 SA6.1

34、Use a frequency of 1 GHz, calculate D EOAT (equivalent open area test distance). .SA2 APPENDIX A Standards for ComponentsA1 SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL IN

35、TRODUCTION 1 Scope 1.1 These requirements cover the individual units that comprise a home health care system intended for use in ordinary indoor residential locations. 1.2 These requirements also cover a complete home health care system in which a signal initiating device (both routine monitoring an

36、d medical emergency signals) may be connected directly or indirectly to receiving equipment at a residence or to continuously monitored receiving equipment at a central supervising station. The system is arranged so that a predetermined change in the status of the signal initiating circuits or devic

37、es automatically causes transmission of a signal over a communication channel to receiving equipment at a residence, to a central supervising station, or to a private telephone number. 1.3 The components of the home health care system may include signal initiating devices, control units, transmitter

38、s, and digital communicators, all located at the residence, and the receiving, processing, and displaying equipment located at the central supervising station. 1.4 All eld wiring extending to signal initiating units located at the residence is intended to be energized from power limited circuits as

39、dened in 5.3 (c). 1.5 The units covered by these requirements are intended to be installed in accordance with the requirements of: a) The National Electrical Code, NFPA 70; b) Other applicable installation codes; and c) The local inspection authority having jurisdiction. 1.6 Where a unit employs res

40、idential re alarm functions, it shall comply with the Standard for Household Fie Warning System Units, UL 985. Where a unit employs household burglar alarm functions, it shall comply with the Standard for Household Burglar-Alarm System Units, UL 1023. A unit utilizing non-re and/or non-carbon monoxi

41、de emergency and/or non-emergency signaling functions shall meet the requirements of the Standard for General Purpose Signaling Devices and Systems, UL 2017. SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBU

42、TION WITHOUT PERMISSION FROM UL 2 Components 2.1 Except as indicated in 2.2, a component of a unit covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components generally used in the units covered by this standard. 2.2 A co

43、mponent need not comply with a specic requirement that: a) Involves a feature or characteristic not needed in the application of the component in the unit covered by this standard or b) Is superseded by a requirement in this standard. 2.3 A component shall be used in accordance with its recognized r

44、ating established for the intended conditions of use. 2.4 Specic components are recognized as being incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied li

45、mits and shall be used only under those specic conditions for which they have been recognized. 2.5 If a digital alarm communicator transmitter is used to transmit signals to a remote location and is to be included as a component of the system, it shall comply with the applicable requirements in the

46、Standard for Digital Alarm Communicator System Units, UL 1635. Otherwise the user must be notied that the off-premises transmission method has not been so investigated. 3 Units of measurement 3.1 When a value for measurement is followed by a value in other units in parentheses, the rst stated value

47、is the requirement. 3.2 Unless otherwise indicated, all voltage and current values mentioned in this standard are root-mean-square (rms). 4 Undated references 4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the lates

48、t edition of that code or standard. SEPTEMBER 21, 2017 HOME HEALTH CARE SIGNALING EQUIPMENT - UL 1637 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5 Glossary 5.1 For the purpose of this standard the following denitions apply. 5.2 CENTRAL

49、 STATION RECEIVING UNIT Equipment located at a central station that receives and displays the information to the operator for action. 5.3 CIRCUITS, ELECTRICAL a) High-Voltage A circuit involving a potential of not more than 600 volts and having circuit characteristics in excess of those of a low-voltage power limited circuit. b) Low-Voltage A circuit involving a potential of not more than 30 volts AC rms, 42.4 volts AC peak or DC. c) Power Limited A circuit in which the output is limited to 100 volt-am