ANSI UL 1082-2009 UL Standard for Safety Household Electric Coffee Makers and Brewing-Type Appliances (Sixth Edition Reprint with revisions through and including September 28 2017).pdf

《ANSI UL 1082-2009 UL Standard for Safety Household Electric Coffee Makers and Brewing-Type Appliances (Sixth Edition Reprint with revisions through and including September 28 2017).pdf》由会员分享，可在线阅读，更多相关《ANSI UL 1082-2009 UL Standard for Safety Household Electric Coffee Makers and Brewing-Type Appliances (Sixth Edition Reprint with revisions through and including September 28 2017).pdf（159页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1082 Household Electric Coffee Makers and Brewing-Type Appliances STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM U

2、LUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Household Electric Coffee Makers and Brewing-Type Appliances, UL 1082 Sixth Edition, Dated March 17, 2009 SUMMARY OF TOPICS The revisions to ANSI/UL 1082 are being i

3、ssued to add the Carafe Handle Security Test. The revised requirements are substantially in accordance with Proposal(s) on this subject dated April 15, 2016, September 30, 2016, and November 25, 2016. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked

4、with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is

5、without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, l

6、oss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless

7、 of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced wh

8、ile purchaser is storing an electronic Standard on the purchasers computer system. MARCH 24, 2017 UL 1082 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 24, 2017 UL 1082 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZE

9、D FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 17, 2009 (Title Page Reprinted: March 24, 2017) 1 UL 1082 Standard for Household Electric Coffee Makers and Brewing-Type Appliances First Edition December, 1972 Second Edition July, 1979 Third Edition August, 1985 Fourth Edi

10、tion October, 1991 Fifth Edition November, 1996 Sixth Edition March 17, 2009 This ANSI/UL Standard for Safety consists of the Sixth Edition including revisions through March 24, 2017. The most recent designation of ANSI/UL 1082 as an American National Standard (ANSI) occurred on March 24, 2017. ANSI

11、 approval for a standard does not include the Cover Page, Transmittal Pages and Title Page. The Department of Defense (DoD) has adopted UL 1082 on February 6, 1976. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revi

12、sions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard

13、should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 1082-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION O

14、R DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 24, 2017 UL 1082 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .6 2 Components .6 3 Undated References 6 4 Units of Measurement .6 5 Glossa

15、ry .7 CONSTRUCTION 6 General 8A 7 Frame and Enclosure 8C 8 Assembly .17 9 Handles 17 9.1 General 17 9.2 Handle assembly .18A 10 Corrosion Protection 19 11 Supply Connections .19 11.1 General .19 11.2 Strain relief 22 11.3 Pin terminals .22A 11.4 Bushings 24 12 Current-Carrying Parts 25 13 Internal W

16、iring 25 13.1 General .25 13.2 Protection of wiring .26 13.3 Splices 26 14 Secondary Circuits 26B 14.1 General 26B 14.2 Limited-energy secondary circuits 27 15 Heating Elements .28 16 Electrical Insulation .28 16.7 Film-coated wire (magnet wire) 29 17 Thermal Insulation 30 18 Thermal Cutoffs 30 19 L

17、ampholders .30 20 Switches .31 21 Dual Voltage Appliance 32 22 Controls and Control Circuits .32 22A Electromechanical and Electronic Controls 32A 22B Controls End Product Test Parameters .32B 22B.1 General 32B 22B.2 Auxiliary controls 32B 22B.3 Operating controls (regulating controls) .32C 22B.4 Pr

18、otective controls (limiting controls) .32E 22B.5 Controls using a temperature sensing device .32G 23 Overheating Protection .32G 24 Spacings .32H 24.1 General 32H 24.2 Barriers .32I MARCH 24, 2017 UL 1082 2AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMI

19、SSION FROM UL 24A Spacings on Printed-Wiring Boards .32I 25 Grounding 32J 26 Protection Against Injury to Persons 33 26A Ground-Fault, Arc-Fault, and Leakage Current Detectors/Interrupters 34 26B Surge Protective Device 34A 27 Pressure Vessels and Parts Subject to Pressure 34A PERFORMANCE 28 General

20、 36 29 Resistance of Grounding Test 36 30 Power Input 36 31 Leakage Current Test .37 32 Operational Tests .39 33 Normal Temperature Tests .39 33.1 General .39 33.2 Specic test conditions 44B 34 Leakage Current as a Result of Moisture Tests .47 35 Dielectric Voltage-Withstand Test .49 36 Broken Eleme

21、nt Test 50 37 Strain Relief Test .50 38 Push-Back Relief Test .50 39 Metal Enclosure Impact Tests 51 40 Thermal Degradation 54 41 Handle Securement Tests .54 41.1 General .54 41.2 Oven conditioning 54 41.3 Dishwashing .55 41.4 Flexing test 55 41.5 Static load .55 41.6 Static force 55 41.7 Dynamic lo

22、ad 58 42 Under-Cabinet and Wall Mounted Appliances-Impact Test .60 43 Loading Test .60 44 Stability Test .61 45 Tip Over Test 61 46 Dynamic Stability Test .61 47 Abnormal Operation Tests .65 47.1 General .65 47.2 Specic test conditions 66 47.3 Dual voltage appliances .70 47.4 Fusible devices test 70

23、 47.5 Surge test .70 48 Component Failure Test 70A 49 Automatic Controls Test 70B 49.1 General 70B 49.2 Endurance .70B 50 Permanence of Marking Tests 71 MANUFACTURING AND PRODUCTION-LINE TESTS 51 Dielectric Voltage-Withstand Test .71 51A Insertion/Withdrawal Test for Electric Kettles 74 MARCH 24, 20

24、17 UL 1082 2BUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 52 Polarization and Grounding Continuity Tests 74A 52.1 Polarization test 74A 52.2 Continuity of grounding connection 74A MARCH 24, 2017 UL 1082 2CUL COPYRIGHTED MATERIAL NOT AUTHO

25、RIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 24, 2017 UL 1082 2D No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 52.3 Electrical indicating device .75 RATINGS 53 Details .75 MARKINGS 54

26、Details .75 55 Carton Marking .78 INSTRUCTION MANUAL 56 General 78 57 All Appliances 79 58 Specic Appliances .80 59 User Maintenance 81 SUPPLEMENT SA - HOUSEHOLD ELECTRIC DRIP-TYPE COFFEE MAKERS AND SIMILAR DRIP-TYPE BREWING APPLIANCES SA1 Scope SA1 SA2 Glossary SA1 SA3 Assembly .SA1 SA4 Corrosion P

27、rotection .SA2 SA5 Supply Connections SA2 SA6 Gaskets and Seals .SA2 SA7 Water Connections SA2 SA8 Thermal Conductivity .SA3 SA9 Grounding SA4 SA10 Operating Controls SA4 SA11 Power-On Indicator .SA5 SA12 Temperature Controls .SA5 SA12.1 General .SA5 SA12.2 Temperature regulating .SA6 SA12.3 Limitin

28、g-type devices SA6A SA13 Operation Degradation SA7 SA14 Leakage Current .SA8 SA15 Normal Temperature SA8 SA16 Leakage Current as a Result of Moisture .SA8A SA17 Stability SA8B SA18 Loading Test .SA9 SA19 Impact Test .SA11 SA20 Abnormal Operation .SA11 SA20.1 General SA11 SA20.2 Specic test condition

29、s SA12 SA20.3 Dry operation .SA12 SA20.4 Overll .SA12 SA20.5 Restricted water inlet SA14 SA21 Tests by Manufacturer .SA14 SA21.1 Polarization verication SA14 MARCH 24, 2017 UL 1082 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SA21.2 Cont

30、inuity of grounding connection SA15 SA21.3 Indicator .SA15 SA22 Markings .SA15 SA23 Graphical Symbols and Supplemental Markings .SA15 SA23.1 No user-serviceable parts compartment warning SA15 SA23.2 Graphical symbol size and color SA17 SA23.3 Supplemental marking size and color SA17 SA23.4 Size of o

31、utlines and symbols .SA18 SA23.5 Explanation of graphical symbols in the operating instructions SA18 SA24 Important Safeguards SA20 SA25 User Maintenance .SA22 SUPPLEMENT SB - HOSPITALITY-USE APPLIANCES SB1 Scope SB1 SB2 Assembly .SB1 SB3 Supply Connections SB2 SB4 Grounding SB2 SB5 Operating Contro

32、ls .SB2 SB6 Power-On Indicator SB3 SB7 Operation Tests .SB4 SB8 Test for Permanence of Cord Tag .SB4 SB9 Tests by Manufacturer Continuity of Grounding Connection .SB5 SB10 Markings SB5 SB11 Important Safeguards Cord Tag SB5 SB12 User Maintenance SB6 SEPTEMBER 29, 2016 UL 1082 4UL COPYRIGHTED MATERIA

33、L NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Appendix A JUNE 17, 2011 UL 1082 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover portable electric coffee

34、 makers, percolators, coffee urns, and other brewing-type appliances rated 120 V or less, for use in ordinary locations in accordance with the National Electrical Code, NFPA 70. 1.2 In addition to coffee makers, this Standard covers tea pots, water kettles, carafes, soup warmers, and other similar a

35、ppliances in which liquid is heated to greater than 115F (46C), and are lifted and tilted to dispense the liquid in normal service. 1.3 These requirements do not cover coffee-making-type appliances with capacities of more than 250 ounces (7.4 L), appliances intended for outdoor use, or appliances th

36、at are covered in individual requirements that are separate from this Standard. 1.4 For the purposes of this Standard, a requirement that applies to one type of equipment is identied by a specic reference to the type of equipment involved (for example, percolator or other specic appliance). In the a

37、bsence of such specic reference or if the term appliance is employed, it is to be understood that the requirement applies to all types of equipment covered by the Standard. 2 Components Section 2 deleted June 17, 2011 3 Undated References 3.1 Any undated reference to a code or standard appearing in

38、the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 4 Units of Measurement 4.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 4.2 Unless indicated otherwise all v

39、oltages and current values mentioned in this Standard are root-mean-square (rms). JUNE 17, 2011 UL 1082 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5 Glossary 5.1 For the purposes of this Standard the following denitions apply. 5.1.1 AP

40、PLIANCE COUPLER A single-outlet, female contact device for attachment to a exible cord as part of a detachable power-supply cord to be connected to an appliance inlet (motor attachment plug). 5.1.1 added June 17, 2011 5.1.2 APPLIANCE INLET (Motor Attachment Plug) A male contact device mounted on an

41、end product appliance to provide an integral blade conguration for the connection of an appliance coupler or cord connector. 5.1.2 added June 17, 2011 5.1.3 APPLIANCE (FLATIRON) PLUG An appliance coupler type of device having a cord guard and a slot conguration specied for use with heating or cookin

42、g appliances. 5.1.3 added June 17, 2011 5.1.4 COMPONENT A device or fabricated part of the appliance covered by the scope of a safety standard dedicated to the purpose. When incorporated in an appliance, equipment otherwise typically eld installed (e.g. luminaire) is considered to be a component. Un

43、less otherwise specied, materials that compose a device or fabricated part, such as thermoplastic or copper, are not considered components. 5.1.4 added June 17, 2011 5.1.5 CONTROL, AUTOMATIC ACTION A control in which at least one aspect is non-manual. 5.1.5 added June 17, 2011 5.1.6 CONTROL, AUXILIA

44、RY A device or assembly of devices that provides a functional utility, is not relied upon as an operational or protective control, and therefore is not relied upon for safety. For example, an efficiency control not relied upon to reduce the risk of electric shock, re, or injury to persons during nor

45、mal or abnormal operation of the end product is considered an auxiliary control. 5.1.6 added June 17, 2011 5.1.7 CONTROL, MANUAL A device that requires direct human interaction to activate or rest the control. 5.1.7 added June 17, 2011 5.1.8 CONTROL, OPERATING A device or assembly of devices, the op

46、eration of which starts or regulates the end product during normal operation. For example, a thermostat, the failure of which a thermal cutout/limiter or another layer of protection would reduce the risk of electric shock, re, or injury to persons, is considered an operating control. 5.1.8 added Jun

47、e 17, 2011 5.1.9 CONTROL, PROTECTIVE A device or assembly of devices, the operation of which is intended to reduce the risk of electric shock, re or injury to persons during normal and reasonably anticipated abnormal operation of the appliance. For example, a thermal cutout/limiter, or any other con

48、trol/circuit relied upon for normal and abnormal conditions, is considered a protective control. (During the testing of the protective control/circuit, the protective functions are veried under normal and single-fault conditions of the control.) 5.1.9 added June 17, 2011 JUNE 17, 2011 UL 1082 7UL CO

49、PYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.1.10 CONTROL, TYPE 1 ACTION The actuation of an automatic control for which the manufacturing deviation and the drift (tolerance before and after certain conditions) of its operating value, operating time, or operating sequence has not been declared and tested under this standard. 5.1.10 added June 17, 2011 5.1.11 CONTROL, TYPE 2 ACTION The actuation of an automatic cont