ANSI ISO IEC 9594-6-2001 Information technology Open Systems Interconnection The Directory Selected attribute types (Adopted by INCITS)《信息技术.开放系统互连.目录 INCITS采用选择的属性类型》.pdf

《ANSI ISO IEC 9594-6-2001 Information technology Open Systems Interconnection The Directory Selected attribute types (Adopted by INCITS)《信息技术.开放系统互连.目录 INCITS采用选择的属性类型》.pdf》由会员分享，可在线阅读，更多相关《ANSI ISO IEC 9594-6-2001 Information technology Open Systems Interconnection The Directory Selected attribute types (Adopted by INCITS)《信息技术.开放系统互连.目录 INCITS采用选择的属性类型》.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard.Date of ANSI Approval: 12/24/2003Published by American National Standards Institute,25 West 43rd Street, New York, New York 10036Copyright 2003 by Information Technology Industry Council

2、 (ITI).All rights reserved.These materials are subject to copyright claims of International Standardization Organization (ISO), InternationalElectrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council(ITI). Not for resale. No part of t

3、his publication may be reproduced in any form, including an electronic retrieval system, withoutthe prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the United States of AmericaReference numberISO

4、/IEC 9594-6:2001(E)ISO/IEC 2001INTERNATIONAL STANDARD ISO/IEC9594-6Fourth edition2001-12-15Information technology Open Systems Interconnection The Directory: Selected attribute types Technologies de linformation Interconnexion de systmes ouverts (OSI) Lannuaire: Types dattributs slectionns ISO/IEC 9

5、594-6:2001(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloadi

6、ng this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the Gene

7、ral Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given

8、 below. ISO/IEC 2001 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs memb

9、er body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.ch Web www.iso.ch Published by ISO in 2002 Printed in Switzerland ii ISO/IEC 2001 All rights reserved ISO/IEC 9594-6:2001(E) ISO/IEC 2001 A

10、ll rights reserved iiiCONTENTS Page 1 Scope 1 2 Normative references 1 2.1 Identical Recommendations | International Standards. 1 2.2 Other references 2 3 Definitions 2 4 Conventions 3 5 Definition of selected attribute types 4 5.1 System attribute types 4 5.2 Labelling attribute types 4 5.3 Geograp

11、hical Attribute Types . 6 5.4 Organizational attribute types 8 5.5 Explanatory attribute types 9 5.6 Postal Addressing attribute types 11 5.7 Telecommunications Addressing attribute types. 12 5.8 Preferences attribute types. 15 5.9 OSI Application attribute types. 16 5.10 Relational attribute types.

12、 16 5.11 Domain attribute types 18 5.12 Notification attributes 18 6 Definition of matching rules. 23 6.1 String matching rules. 23 6.2 Syntax-based matching rules. 26 6.3 Time matching rules 28 6.4 First component matching rules 29 6.5 Word matching rules . 30 6.6 Approximate Matching Rules 32 6.7

13、Special Matching Rules. 33 6.8 Zonal Match 33 7 Definition of Context Types . 37 7.1 Language Context . 37 7.2 Temporal Context 37 7.3 Locale Context 40 Annex A Selected attribute types in ASN.1 41 Annex B Summary of attribute types 59 Annex C Upper bounds 61 Annex D Alphabetical index of attributes

14、, matching rules and contexts 62 Annex E Examples for zonal match matching rules . 64 Annex F Amendments and corrigenda . 66 ISO/IEC 9594-6:2001(E) iv ISO/IEC 2001 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commis

15、sion) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO

16、and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/

17、IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national

18、 bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO/IEC 9594 may be the subject of patent rights. ISO and IEC shall not be held respo

19、nsible for identifying any or all such patent rights. Users and implementors should note the existence of a “defect resolution” procedure in ISO/IEC JTC 1 to identify and correct errors in International Standards through the publication of Technical Corrigenda. Identical corrections are made to the

20、corresponding ITU-T Recommendations through Corrigenda and may also be made in the form of Implementors Guides. Details of Technical Corrigenda to International Standards are available on the ISO website; published Technical Corrigenda can be obtained via the ISO webstore or from the ISO and IEC nat

21、ional bodies. Corrigenda and Implementors Guides to ITU-T Recommendations can be obtained from the ITU-T website. ISO/IEC 9594-6 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems, in collabo

22、ration with ITU-T. The identical text is published as ITU-T Rec. X.520. This fourth edition of ISO/IEC 9594-6 constitutes a technical revision of the third edition (ISO/IEC 9594-6:1998), which is provisionally retained in order to support implementations based on the third edition. This edition also

23、 incorporates Corrigendum 1:2001. ISO/IEC 9594 consists of the following parts, under the general title Information technology Open Systems Interconnection The Directory: Part 1: Overview of concepts, models and services Part 2: Models Part 3: Abstract service definition Part 4: Procedures for distr

24、ibuted operation Part 5: Protocol specifications Part 6: Selected attribute types Part 7: Selected object classes Part 8: Public-key and attribute certificate frameworks Part 9: Replication Part 10: Use of systems management for administration of the Directory Annex A forms a normative part of this

25、part of ISO/IEC 9594. Annexes B, C, D, E and F are for information only. ISO/IEC 9594-6:2001(E) ISO/IEC 2001 All rights reserved vIntroduction This Recommendation | International Standard, together with other Recommendations | International Standards, has been produced to facilitate the interconnect

26、ion of information processing systems to provide directory services. A set of such systems, together with the directory information that they hold, can be viewed as an integrated whole, called the Directory. The information held by the Directory, collectively known as the Directory Information Base

27、(DIB), is typically used to facilitate communication between, with or about objects such as application entities, people, terminals, and distribution lists. The Directory plays a significant role in Open Systems Interconnection, whose aim is to allow, with a minimum of technical agreement outside of

28、 the interconnection standards themselves, the interconnection of information processing systems: from different manufacturers; under different managements; of different levels of complexity; and of different ages. This Recommendation | International Standard defines a number of attribute types whic

29、h may be found useful across a range of applications of the Directory, as well as a number of standard attribute syntaxes and matching rules. One particular use for many of the attributes defined herein is in the formation of names, particularly for the classes of object defined in ITU-T Rec. X.521

30、| ISO/IEC 9594-7. This fourth edition technically revises and enhances, but does not replace, the third edition of this Recommendation | International Standard. Implementations may still claim conformance to the third edition. However, at some point, the third edition will not be supported (i.e. rep

31、orted defects will no longer be resolved). It is recommended that implementations conform to this fourth edition as soon as possible. This fourth edition specifies version 1 and version 2 of the Directory protocols. The first and second editions specified only version 1. Most of the services and pro

32、tocols specified in this edition are designed to function under version 1. However some enhanced services and protocols, e.g. signed errors, will not function unless all Directory entities involved in the operation have negotiated version 2. Whichever version has been negotiated, differences between

33、 the services and between the protocols defined in the four editions, except for those specifically assigned to version 2, are accommodated using the rules of extensibility defined in this edition of ITU-T Rec. X.519 | ISO/IEC 9594-5. Annex A, which is an integral part of this Recommendation | Inter

34、national Standard, provides the ASN.1 notation for the complete module which defines the attributes, attribute syntaxes, and matching rules. Annex B, which is not an integral part of this Recommendation | International Standard, provides a table of attribute types, for easy reference. Annex C, which

35、 is not an integral part of this Recommendation | International Standard, provides suggested upper bounds value constraints used in these Directory Specifications. Annex D, which is not an integral part of this Recommendation | International Standard, lists alphabetically the attributes and matching

36、 rules defined in this Directory Specification. Annex E, which is not an integral part of this Recommendation | International Standard, gives examples relevant to the definition of zonal matching. Annex F, which is not an integral part of this Recommendation | International Standard, lists the amend

37、ments and defect reports that have been incorporated to form this edition of this Recommendation | International Standard. ISO/IEC 9594-6:2001 (E) ITU-T X.520 (02/2001 E) 1 INTERNATIONAL STANDARD ISO/IEC 9594-6:2001 (E) ITU-T RECOMMENDATION Information technology Open Systems Interconnection The Dir

38、ectory: Selected attribute types SECTION 1 GENERAL 1 Scope This Recommendation | International Standard defines a number of attribute types and matching rules which may be found useful across a range of applications of the Directory. Attribute types and matching rules fall into three categories, as

39、described below. Some attribute types and matching rules are used by a wide variety of applications or are understood and/or used by the Directory itself. NOTE It is recommended that an attribute type or matching rule defined in this Recommendation | International Standard be used, in preference to

40、the generation of a new one, whenever it is appropriate for the application. Some attribute types and matching rules are internationally standardized, but are application-specific. These are defined in the standards associated with the application concerned. Any administrative authority can define i

41、ts own attribute types and matching rules for any purpose. These are not internationally standardized, and are available to others beyond the administrative authority which created them only by bilateral agreement. 2 Normative references The following Recommendations and International Standards cont

42、ain provisions which, through reference in this text, constitute provisions of this Recommendation | International Standard. At the time of publication, the editions indicated were valid. All Recommendations and Standards are subject to revision, and parties to agreements based on this Recommendatio

43、n | International Standard are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards. The Telecommunication Standardization Bureau of the IT

44、U maintains a list of currently valid ITU-T Recommendations. 2.1 Identical Recommendations | International Standards ITU-T Recommendation X.200 (1994) | ISO/IEC 7498-1:1994, Information technology Open Systems Interconnection Basic Reference Model: The Basic Model. ITU-T Recommendation X.500 (2001)

45、| ISO/IEC 9594-1:2001, Information technology Open Systems Interconnection The Directory: Overview of concepts, models and services. ITU-T Recommendation X.501 (2001) | ISO/IEC 9594-2:2001, Information technology Open Systems Interconnection The Directory: Models. ITU-T Recommendation X.509 (2000) |

46、 ISO/IEC 9594-8:2001, Information technology Open Systems Interconnection The Directory: Public-key and attribute certificate frameworks. ITU-T Recommendation X.511 (2001) | ISO/IEC 9594-3:2001, Information technology Open Systems Interconnection The Directory: Abstract service definition. ITU-T Rec

47、ommendation X.518 (2001) | ISO/IEC 9594-4:2001, Information technology Open Systems Interconnection The Directory: Procedures for distributed operation. ISO/IEC 9594-6:2001 (E) 2 ITU-T X.520 (02/2001 E) ITU-T Recommendation X.519 (2001) | ISO/IEC 9594-5:2001, Information technology Open Systems Inte

48、rconnection The Directory: Protocol specifications. ITU-T Recommendation X.521 (2001) | ISO/IEC 9594-7:2001, Information technology Open Systems Interconnection The Directory: Selected object classes. ITU-T Recommendation X.525 (2001) | ISO/IEC 9594-9:2001, Information technology Open Systems Interc

49、onnection The Directory: Replication. ITU-T Recommendation X.530 (2001) | ISO/IEC 9594-10:2001, Information technology Open Systems Interconnection The Directory: Use of systems management for administration of the Directory. ITU-T Recommendation X.680 (1997) | ISO/IEC 8824-1:1998, Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation. ITU-T Recommendation X.681 (1997) | ISO/IEC 8824-2:1998, Inform