ANSI ISO 14269-5-2006 Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 5 Pressurization system test method.pdf

《ANSI ISO 14269-5-2006 Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 5 Pressurization system test method.pdf》由会员分享，可在线阅读，更多相关《ANSI ISO 14269-5-2006 Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 5 Pressurization system test method.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 ASABE/ISO 14269-5:1997 (SEP2006) (R2017) Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 5: Pressurization system test method American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of member

2、s worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and biological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the

3、Society; principally agricultural field equipment, farmstead equipment, structures, soil and water resource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standar

4、ds, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not en

5、sure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are design

6、ated as “ASAE“, regardless of the revision approval date. Newly developed Standards, Engineering Practices and Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an Americ

7、an National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and ma

8、terially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revis

9、ed or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodically to reaffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA, p

10、hone 269-429-0300, fax 269-429-3852, hqasabe.org S T A N D A R D ASABE/ISO 14269-5:1997 (SEP2006) (R2017) Copyright American Society of Agricultural and Biological Engineers 1ASABE/ISO 14269-5:1997 (SEP2006) (R2017) Approved October 2006; reaffirmed January 2017 as an American National Standard Trac

11、tors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 5: Pressurization system test method These materials are subject to copyright claims of ISO and ASABE. No part of this publication may be reproduced in any form, including an electronic retrieval system

12、, without the prior written permission of ASABE. All requests pertaining to ASABE/ISO 14269-5:1997 (SEP2006) standard should be submitted to ASABE. This standard was reviewed for adoption by the ASABE Power and Machinery Agricultural Machinery Common Tests Technical subcommittee, and has been formal

13、ly approved by the Technical Committee. The adoption of this standard was made possible by the signing of 2004 SAE-ASABE copyright agreements, which gave ASABE a royalty-free license to publish in whole or in part SAE standard document J1503. Adopted and approved as an American National Standard Oct

14、ober 2006; reaffirmed January 2012, January 2017. Keywords: Enclosure, Environment, Operator 0 Foreword 0.1 ASABE/ISO 14269-5:1997, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environmentPart 5: Pressurization system test method, is an adoption without modifi

15、cation of the identically titled ISO standard ISO 14269-5:1997, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environmentPart 5: Pressurization system test method. This ISO standard is a derivative of SAE J1503, Performance Test for Air-Conditioned, Heated, and

16、 Ventilated Off-Road Self-Propelled Work Machines. 0.2 ASABE/ISO 14269-5 specifies a test procedure which will provide for uniform measurement of the pressurization inside an operator enclosure of tractors and self-propelled machines for agriculture and forestry when equipped with a ventilation syst

17、em. 0.3 One normative reference is listed in ISO 14269-5:1997. This reference has been reviewed and accepted as part of the adoption of ASABE/ISO 14269-5:1997. 0.4 This standard has been approved as an American National Standard by ANSI (American National Standards Institute). Text of ISO 14269-5:19

18、97, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environmentPart 5: Pressurization system test method, follows. 1 Scope This part of ISO 14269 specifies a test procedure which will provide for uniform measurement of the pressurization inside an operator enclos

19、ure of tractors and self-propelled machines for agriculture and forestry when equipped with a ventilation system. ASABE/ISO 14269-5:1997 (SEP2006) (R2017) Copyright American Society of Agricultural and Biological Engineers 22 Normative reference The following standard contains provisions which, thro

20、ugh reference in this text, constitute provisions of this part of ISO 14269. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of ISO 14269 are ncouraged to investigate the possibility of applying the most

21、 recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 14269-1:1997, Tractors and self-propelled machines for agriculture and forestry Operator enclosure environment Part 1: Vocabulary. 3 Definitions For the purposes

22、 of this part of ISO 14269, the definitions given in ISO 14269-1 apply, of which the following are particularly relevant. 3.1 pressurization: Pressure differential between the static pressure inside and outside of the operator enclosure. ISO 14269-1:1997, definition 2.12 3.2 pressurization system: M

23、eans used to pressurize the operator enclosure including any components which influence the performance of the system. ISO 14269-1:1997, definition 2.13 4 Test equipment 4.1 Device to measure pressurization, with a measuring accuracy of 10% of the observed values. 4.2 Device to measure blower voltag

24、e, with a measuring accuracy of 2% of the observed values. 5 Test conditions 5.1 The pressurization system shall be completely powered by the standard equipment on the test machine with the engine operating at rated speed. The voltage at blower motor terminals shall be no more than 20% above the nom

25、inal rating of the system (for example 14,4 V for a 12 V system). 5.2 All machine accessories pertinent to the operation of the operator enclosure, enclosure components and blowers shall be standard production parts or the equivalent, adjusted within the machine manufacturers specification limits. C

26、lean air filters are recommended since the amount of dirt in the filters may affect pressurization. 5.3 An operator may be present in the operator enclosure throughout the duration of the test. 6 Test procedure 6.1 Operate the pressurization system for a minimum of 15 min prior to obtaining data. Th

27、e pressurization system shall be operated using maximum outside air, with maximum blower speed setting. No automatic pressurization controls shall be locked out. 6.2 To obtain uniform results, neither the air conditioning nor heating systems shall be in operation during the pressurization system tes

28、ts. 6.3 Record, for information purposes only, the blower voltage, ambient temperature, barometric pressure, wind velocity, and wind direction in elation to the machine centreline. ASABE/ISO 14269-5:1997 (SEP2006) (R2017) Copyright American Society of Agricultural and Biological Engineers 36.4 Record enclosure pressure, in pascals. NOTE: It is recommended to avoid velocity head on the pressure measuring device by keeping its outlets away from air streams. 7 Test report The obtained enclosure pressure (Pa) shall be included in the test report.