ANSI INCITS182-1990 Guideline for Bar Code Print Quality《条码印刷质量指南》.pdf

《ANSI INCITS182-1990 Guideline for Bar Code Print Quality《条码印刷质量指南》.pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS182-1990 Guideline for Bar Code Print Quality《条码印刷质量指南》.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI INCITS 182-1990 (R2002) (formerly ANSI X3.182-1990 (R2000)for Information Systems Bar Code Print Quality GuidelineCopyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AmericanNat

2、ionalStandardApproval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgment of the ANSI Board of StandardsReview, substantial agr

3、eement has been reached by directly and materiallyaffected interests. Substantial agreement means much more than a simplemajority, but not necessarily unanimity. Consensus requires that all views andobjections be considered, and that a concerted effort be made toward theirresolution.The use of Ameri

4、can National Standards is completely voluntary; their existencedoes not in any respect preclude anyone, whether he has approved the standardsor not, from manufacturing, marketing, purchasing, or using products, processes,or procedures not conforming to the standards.The American National Standards I

5、nstitute does not develop standards and will inno circumstances give an interpretation of any American National Standard.Moreover, no person shall have the right or authority to issue an interpretation ofan American National Standard in the name of the American National StandardsInstitute. Requests

6、for interpretations should be addressed to the secretariat orsponsor whose name appears on the title page of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken p

7、eriodically to reaffirm, revise, or withdrawthis standard. Purchasers of American National Standards may receive currentinformation on all standards by calling or writing the American National StandardsInstitute.Published byAmerican National Standards Institute11 West 42nd Street, New York, New York

8、 10036Copyright 1990 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the United Sta

9、tes of AmericaCopyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI X3.1 82-1990 American National Standard for Information Systems - Bar Code Print Quality - Guideline Secretaria

10、t Computer and Business Equipment Manufacturers Association Approved March 30, 1990 American National Standards Institute, Inc Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ame

11、rican pp A roval of an American National Standard requires verification by ANSI that the National requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Standard c onsensus is established when, in the judgment of the ANSI Board of Standards

12、 Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their

13、 resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards.

14、The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American Na

15、tional Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards

16、 Institute require that action be taken periodically to reaffii, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by American National Standards Ins

17、titute 1430 Broadway, New York, New York 10018 Copyright 0 1990 by American National Standards Institute All rights reserved. No part of thii publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the U

18、nited States of America APSlM1090IB Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Foreword (This Foreword is not part of American National Standard X3.182-1 990 ) This standard

19、 applies to the quality control parameters and procedures necessary for the evaluation of the optical characteristics of a printed bar code symbol. It defines the optical characteristics and parameters to be measured, the methodology for their measurement, and a grading system to evaluate their perf

20、ormance in final use. This document is intended to be used alone as a guide for establishing bar code testing procedures, in the creation of the print quality portions of new bar code application specifica- tions, or with existing bar code application specifications. There are two annexes in this st

21、andard. Annex A is normative and is considered part of this standard; Annex B is informative and is not considered part of this standard. Requests for interpretation, suggestions for improvement or addenda, or defect reports are welcome. They should be sent to the X3 Secretariat, Computer and Busine

22、ss Equipment Manufacturers Association, 311 First Street, NW, Suite 500, Washington, DC 20001-2178. This standard was processed and approved for submittal to ANSI by Accredited Standards Committee on Information Processing Systems, X3. Committee approval of the standard does not necessarily imply th

23、at all members voted for its approval. At the time it approved this standard, the X3 committee had the following members: Richard Gibson, Chair Donald C. Loughry, Vice-Chair Jean-Paul Emard, Administrative Secretary Organization Represented Name of Representative Allen-Bradley Company . . . . . . .

24、. . . . . . . . . . . . . . . . . Ronald H Reimer American Library Association . . . . . . . . . . Paul Peters American Nuclear Society . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Geraldine C Main AMP, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25、. . . . . . . 1 . . . . . . . . . . . . . . Edward Kelly Patrick Lannon (Ah) Apple Computer, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Karen Higginbottom Michael J Lawler (Ah) Apple Professional Users Exchange (APUE) . . . . . . Ira Wilson Association of the Institute for Certifi

26、cation of Computer Professionals . . . . . . . . . . . Kenneth Zemrowski Eugene M Dwyer (Alt) AT b) tolerances built into decoding algorithms; c) the ability of operators to rescan if the first read is unsuccessful; d) the availability of scanning devices that provide for multiple, unique scan paths

27、 across the code. The different symbol grades indicate print quality. An application specification shall identify the minimum acceptable grade level including the measuring aperture and nominal wavelength(s). Symbols with a grade of A are the best quality and will in general give the best performanc

28、e. In general, this grade symbol is appropriate for systems in which the reader crosses the symbol once or is limited to a single path. A symbol with a grade of 6 may not perform to the same level as one with a grade of A. Some of these B symbols may need to be rescanned. In general, this grade is b

29、est suited for applications which require symbols to be read most of the time in a single pass of a bar code scanner but allow for rescan. 13 Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license f

30、rom IHS-,-,-ANSI X3.182-1990 Symbols of grade C mayrequire more rescans than those of grade B. In general, these grade C symbols may need more frequent rescanning and for best read performance a device that provides for multiple, unique scan paths across the code should be used. A symbol of grade D

31、is best read by bar code readers that provide for multiple, unique scan paths across the symbol. There may be symbols with a D grade that certain readers can not read. Prior to selection of a grade D symbol for a particular application, it is advised that the symbol(s) should be tested with the type

32、 of bar code reader expected to be used. The test(s) will establish that the read results are within acceptable limits and expectations. 5.3.3 Sampling methods and levels Sample size shall be sufficiently large to be statistically valid within the size of the lot or batch being inspected. Acceptable

33、 quality levels (AQL) shall be established prior to quality control inspection. MIL-STD-105D provides useful guidelines for statistically valid sampling plans. 6. Alternate measurements The profile reflectance technique described in this standard is the preferred measurement method. Since quality in

34、spection methods using print contrast signal (PCS) and dimensional tolerances have historic precedence, they may be used. The profile reflectance technique more closely represents the nature of bar code scanning than the historic methods based upon PCS and dimensional tolerances. When traditional va

35、lues are used for print quality evaluation, symbols that offer good, reliable performance may fail PCS, or dimensional tolerances, or both. 6.1 Print contrast signal (PCS) When using PCS-based methods, it is recommended that the reflectance values used in arriving at a PCS value be taken from the ba

36、r code elements. The minimum PCS should be 75 percent. Typically, the percent reflectance of the substrate or spaces within a bar code symbol are required to be a minimum of 50 percent when symbols are printed where the nominal narrow elements are 0.020 inch (0.0508 mm) or less, and a minimum of 25

37、percent when bar code symbols are to be printed where the nominal narrow elements are greater than 0.020 inch (0.0508 mm). The minimum reflectance within any space or quiet zone is 25 percent. The maximum reflectance of any bar is 25 percent. It should be noted that these two limiting factors may no

38、t be reached simultaneously. 6.2 Dimensional tolerances Historical bar code measurement methods define arbitrary dimensional tolerances of elements or measured distances. The decodability method in this guideline allows for graded allocation of the tolerance between the printing process and the barc

39、ode reader. Therefore, use of the decodability method is preferred. Because of historical precedence, dimensional tolerances may be used instead of scan profile measurements. When using dimensional measurement methods, it is recommended that the multiple pass scan criteria described in 5.3.2.1 be us

40、ed. 7. Additional factors affecting print quality 7.1 Substrate 7.1 .l Porosity Substrates with a high degree of porosity could affect the print quality of a bar code symbol by causing the printed image to spread outside the required bar and space dimensional limits or by causing uneven absorption o

41、r specular reflection of the scanning beam. 14 Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI X3.182-1990 7.1.2 Smoothness Smoothness is a description of the textural chara

42、cteristics of a substrate (i.e., the flatness of the substrate). Very smooth surfaces tend to be difficult to print on with some printing methods, due to image transfer and stability problems. Very coarse substrates tend to produce irregularities in the printed bars that may cause reading problems i

43、n certain applications where high-density bar codes are chosen. The proper degree of smoothness should be determined by evaluating the bar code symbol in its final configuration form for each application. 7.1.3 Gloss The effect of gloss varies with different barcode scanning techniques. Therefore, w

44、hen evaluating the gloss value, the maximum acceptable value is to be established by the individual application requirements. 7.1.4 Grain The orientation of the bar code symbol to any substrate grain can affect bar code measurements, or readability, or both. 7.1.5 Opacity Show-through may adversely

45、affect readability when a symbol is affixed over a high-contrast interfering pattern such as another bar code symbol. In such applications, when the symbol cannot be measured in its final configuration, the problems associated with show-through will be reduced if the minimum substrate opacity is 85

46、percent and if the maximum opacity variation is 6 percent. 7.2 Over-laminate 7.2.1 Opacity The opacity of a laminate shall not be sufficient to attenuate or interfere with the reflected light from the scanner enough to cause the bar code symbol to be out of the required specification. The ultimate d

47、etermination as to whether the effects of opacity in the laminate are significant or not shall be made by examination of the laminated bar code symbol in its final configuration for its intended application. Polarized laminates may cause scanning difficulty when readers that are sensitive in this ar

48、ea are used. 7.2.2 Gloss (optical effects) High-gloss laminates tend to require that scanners be positioned at angles other than at 90 degrees (perpendicular) to the surface of the bar code symbol in order to obtain sufficient signal for proper decoding. Matte laminates tend to be less restrictive w

49、ith regards to scanning angle positioning. However, they can also distort or enlarge the printed symbol to the scanner. 7.2.3 Smoothness (physical effects) Textured laminates can cause problems with some wand scanners if the degree of texture is great enough to be detected. Uneven application of adhesive on the laminate or trapped air bubbles between the substrate and the laminate may also create variances in reflectances and dimensional attributes of the bar code symbol as perce