ANSI INCITS 381 AMD 1-2011 Information Technology C Finger Image Based Data Interchange Format C Amendment 1.pdf

《ANSI INCITS 381 AMD 1-2011 Information Technology C Finger Image Based Data Interchange Format C Amendment 1.pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS 381 AMD 1-2011 Information Technology C Finger Image Based Data Interchange Format C Amendment 1.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、American National StandardDeveloped byfor Information Technology Finger Image BasedData Interchange Format Amendment 1INCITS 381-2009/AM1-2011INCITS 381-2009/AM1-2011INCITS 381-2009/AM1-2011Amendment toINCITS 381-2009American National Standardfor Information Technology Finger Image BasedData Interch

2、ange Format Amendment 1SecretariatInformation Technology Industry CouncilApproved June 8, 2011American National Standards Institute, Inc.AbstractThis amendment to the INCITS 381-2009 standard assigns a new version number to distinguish theINCITS version from the SC 37 version, provides additional ch

3、oices for multiple-finger codes, resolves minor inconsistencies, and clarifies ambiguities.Approval of an American National Standard requires review by ANSI that the requirements for due pro-cess, consensus, and other criteria for approval have been met by the standards developer.Approval of an Amer

4、ican National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgement of the ANSI Board ofStandards Review, substantial agreement has been reached by dire

5、ctly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consensus requires that allviews and objections be considered, and that a concerted effort be madetowards their resolution.The use of American National Standards is comp

6、letely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American National Standards Institute does not develop stan

7、dards andwill in no circumstances give an inte rpretation of any A merican NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institute. Re quests for interpretations should

8、beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to r eaffirm, re

9、vise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute, Inc.25 West 43rd Street, New York, NY

10、10036Copyright 2011 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of ITI, 1101 K Street NW, Suite 610, Washington, DC 20005. Printed in the

11、United States of AmericaCAUTION: The developers of this standard have requested that holders of patents that may berequired for the implementation of the standard disclose such patents to the publisher. However,neither the developers nor the publisher have undertaken a patent search in order to iden

12、tifywhich, if any, patents may apply to this standard. As of the date of publication of this standardand following calls for the identification of patents that may be required for the implementation ofthe standard, no such claims have been made. No further patent search is conducted by the de-velope

13、r or publisher in respect to any standard it processes. No representation is made or impliedthat licenses are not required to avoid infringement in the use of this standard.iForeword (This foreword is not part of American National Standard INCITS 381-2009/AM1-2011.)Requests for interpretation, sugge

14、stions for improvement or addenda, or defect re-ports are welcome. They should be sent to InterNational Committee for InformationTechnology Standards (INCITS), ITI, 1101 K Street, NW, Suite 610, Washington, DC20005.This standard was processed and approved for submittal to ANSI by INCITS. Com-mittee

15、approval of this standard does not necessarily imply that all committee mem-bers voted for its approval. At the time it approved this standard, INCITS had thefollowing members:Don Wright, ChairJennifer Garner, SecretaryOrganization Represented Name of RepresentativeAdobe Systems, IncScott FosheeStev

16、e Zilles (Alt.)AIM Global, Inc.Dan MullenCharles Biss (Alt.)Apple Computer, Inc.Kwok LauHelene Workman (Alt.)David Singer (Alt.)Distributed Management Task Force.John CrandallJeff Hilland (Alt.)Electronic Industries AllianceEdward Mikoski, Jr.Henry Cuschieri (Alt.)EMC CorporationGary RobinsonFarance

17、, IncFrank FaranceTimothy Schoechle (Alt.)GS1 USRay DelnickiFrank Sharkey (Alt.)James Chronowski (Alt.)Mary Wilson (Alt.)Hewlett-Packard Company.Karen HigginbottomPaul Jeran (Alt.)IBM Corporation.Gerald LaneRobert Weir (Alt.)Arnaud Le Hors (Alt.)Debra Borland (Alt.)Steve Holbrook (Alt.)IEEE.Bill Ash

18、Jodie Haasz (Alt.)Bob Labelle (Alt.)Intel.Philip WennblomGrace Wei (Alt.)Stephen Balogh (Alt.)Lexmark International.Don WrightDwight Lewis (Alt.)Paul Menard (Alt.)Jerry Thrasher (Alt.)Microsoft Corporation.Jim HughesDick Brackney (Alt.)John Calhoun (Alt.)National Institute of Standards paragraph 2 R

19、eplace with: Upon approval of this standard, the version number shall be “025” Version 2 revision 5. NOTE In order to enable decoders implementing both national and international versions of the standard, the revision number of this version was increased from “020” to “025”. Versions “021”, “022”, “

20、023”, and “024” do not currently exist but could be used for revisions to the international standard. 2. Table 2 General record header; row 2 Replace the current text for Valid values with: “0x30323500 (0 2 5 0x00)” Replace the current text for Notes with: “025” 3. Table 2 General record header; row

21、 7 Replace the current text for Valid values with: “1-255” Replace the current text for Notes with: “Up to 16 views for each single finger, multiple-finger combination, or palm position, but the sum of all of these views shall not exceed 255” 4. Clause 8.3.1.8 Number of finger/palm image views; sent

22、ence 3 Replace with: “If only on e view is contained for each single finger, multiple finger, or palm area, this field shall be equal to the sum of the number of single fingers, multiple finger combinations, and palm areas contained in the image record.” 5. Table 4 Finger image header record; row 2

23、Replace the current text for Valid values with: “0-10; 13-15; 20-36; 40-50” Replace the current text for Notes with: “See Tables 5, 5a, and 6” INCITS 381-2009/AM1-2011 2 6. Clause 8.3.2.3 Finger/palm position; replace paragraph 1 with: This 1-byte field shall contain the finger or palm po sition cod

24、e. The codes for this byte as well as the maximum size of the recorded image are defined in tables 5 and 6 as explained in the note below. Codes 0-10 from table 5 shoul d be used for single fingers. Code s 13 and 14 from table 5 are u sed for the images containing four fingers from the right hand an

25、d left hand respectively. Code 15 from table 5 is the code for accommodating the simultaneous capture of the two thumbs. Additional Codes to accommodate the simultaneous capture of common 2-finger and 3-finger combinations from standalone or mobile identification devices are defined in Table 5a. Thi

26、s table also defines the minimum areas and dimensions for each combination. Codes for palm mages are f ound in table 6. For full palms the cap tured area should extend from the “wrist bracelet“ through the second joint of the fingers. Similarly, the captured area of the upper palm should extend from

27、 the interdigital area through the second joint of the fingers. The lower palm will cover the area from the “wrist bracelet“ through the interdigital area. All dimensions and areas listed in these tables are maximums. 7. Between Tables 5 and 6 insert the following table: Table 5a Multiple Finger Pos

28、ition Codes, Areas and minimum Dimensions Finger position Finger code Min image area (cm2) Min Width (mm) (in) Min Length (mm) (in) 2-Finger Combinations Right index/middle 40 15.47 40.6 1.6 38.1 1.5 Right middle/ring 41 15.47 40.6 1.6 38.1 1.5 Right ring/little 42 15.47 40.6 1.6 38.1 1.5 Left index

29、/middle 43 15.47 40.6 1.6 38.1 1.5 Left middle/ring 44 15.47 40.6 1.6 38.1 1.5 Left ring/little 45 15.47 40.6 1.6 38.1 1.5 Right index/ Left index 46 15.47 40.6 1.6 38.1 1.5 3-Finger Combinations Right index/middle/ring 47 24.19 63.5 2.5 38.1 1.5 Right middle/ring/little 48 24.19 63.5 2.5 38.1 1.5 L

30、eft index/middle/ring 49 24.19 63.5 2.5 38.1 1.5 Left middle/ring/little 50 24.19 63.5 2.5 38.1 1.5 8. Clause 8.3.2.10 Pixel depth; sentence 2; Replace 0x1 with 0x01 for consistency in notation 9. Table 8 - Extended data area type codes; row 5 Replace the current text for Second byte with: “0x00 0xFF” 10. Annex B, Table B.1; row 2; Replace the current text for value with: “30 32 35 00” Replace the current text for Notes with: ”025”