ANSI CTA-803-B-2012 Mobile Electronics Wiring Designations for Audio and Vehicle Security Convenience (Formerly ANSI CEA-803-B).pdf

《ANSI CTA-803-B-2012 Mobile Electronics Wiring Designations for Audio and Vehicle Security Convenience (Formerly ANSI CEA-803-B).pdf》由会员分享，可在线阅读，更多相关《ANSI CTA-803-B-2012 Mobile Electronics Wiring Designations for Audio and Vehicle Security Convenience (Formerly ANSI CEA-803-B).pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/CTA Standard Mobile Electronics Wiring Designations for Audio and Vehicle Security/Convenience ANSI/CTA803-B R-2017 (Formerly ANSI/CEA-803-B) November 2012 NOTICE Consumer Technology Association (CTA) Standards, Bulletins and other technical publications are designed to serve the public intere

2、st through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards, Bulletins and

3、 other technical publications shall not in any respect preclude any member or nonmember of the Consumer Technology Association from manufacturing or selling products not conforming to such Standards, Bulletins or other technical publications, nor shall the existence of such Standards, Bulletins and

4、other technical publications preclude their voluntary use by those other than Consumer Technology Association members, whether the standard is to be used either domestically or internationally. Standards, Bulletins and other technical publications are adopted by the Consumer Technology Association i

5、n accordance with the American National Standards Institute (ANSI) patent policy. By such action, the Consumer Technology Association does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Bulletin or other technical publicatio

6、n. This document does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations

7、before its use. This document is copyrighted by the Consumer Technology Association (CTA) and may not be reproduced, in whole or part, without written permission. Federal copyright law prohibits unauthorized reproduction of this document by any means. Organizations may obtain permission to reproduce

8、 a limited number of copies by entering into a license agreement. Requests to reproduce text, data, charts, figures or other material should be made to the Consumer Technology Association (CTA). (Formulated under the cognizance of the CTA R6 Portable, Handheld and In-Vehicle Electronics Committee.)

9、Published by CONSUMER TECHNOLOGY ASSOCIATION 2017 Technology Phone 800-699-9277; Fax 734-780-2046; Internet http:/; Email Pantone Color Formula Guide Pantone, Inc., 590 Commerce Blvd., Carlstadt, New Jersey, 07072-3098 USA; Phone 201 935 5500; Fax 201 896 0242; Internet http:/; Email customer_ 3 Au

10、dio Terms Standard wiring audio terms shall be those indicated in Table 1, Column A. 3.1 Abbreviations of Audio Terms Standard wiring audio terms shall be abbreviated as indicated in Table 1, Column B. 3.2 Definitions of Audio and Vehicle Navigation Terms Standard audio and vehicle navigation wiring

11、 terms shall be defined as indicated in Table 1, Column C. 3.3 Color Codes Standard color codes are defined in Table 1; Column D. Colors shall be used on wires and connectors. 3.4 Color Palette CEA-803-B does not specify the exact shade or hue of color for use to comply with this standard. However,

12、to provide a consistent reference for manufacturing conformity, the following colors are recommended from the Pantone Color Formula Guide. All color numbers are followed by a “C” denoting swatches for coated printing stock. The color examples shown in Table 1, Column E, may vary in appearance depend

13、ing upon CRT calibration, printer, paper quality, etc. For exact color references, users should consult a recently published Pantone color guide. An example of the color reference is displayed in Table 1, Column E. 3.5 Labeling The abbreviations provided in Table 1; Column B may be used to identify

14、the electrical signals to the installer as applicable. CTA-803-B R2017 2Column A Column B Column C Column D Column E Wire Abbr. Def. Color(Pantone Specification) Color Example 1. Battery (+) BATT (+) 12 volt constant power for source unit memory Yellow (012 C) 2. Accessory (+) ACC (+) 12 volt wire t

15、o energize source unit when key is on/accessory position Red (032 C) 3. Ground (-) GND (-) chassis ground Black (Pantone Black) 4. Illumination (+) ILL (+) wire used to backlight source unit Orange (1505 C)/White (Not Applicable) 5. Dimmer (+) DIM (+) activated with head light switch (adjustable int

16、ensity or ground return) Orange (1505 C) 6. Remote Turn-on (+) REM ON (+) output from source unit used to trigger amp or accessory Blue (Process Blue C)/White (Not Applicable) 7. Power Antenna (+) PWR ANT (+) output from source unit used to trigger electric antenna Blue (Process Blue C) 8. Left Fron

17、t Line Level LF LINE Left front wire (positive + negative) Dark Blue (PMS 2747) 9. Right Front Line Level RF LINE Right front wire (positive + negative) Light Red (PMS 1767) 10. Center Line Level C LINE Center wire (positive + negative) Dark Green (PMS 343) 11. Left Surround Line Level LS LINE Left

18、surround wire (positive + negative) Light Blue (PMS 2707) 12. Right Surround Line Level RS LINE Right surround wire (positive + negative) Light Grey (PMS 621) 13. Subwoofer 1 Line Level SUB1 LINE Subwoofer 1 wire (positive + negative) Purple (PMS 253) 14. Subwoofer 2 Line Level SUB2 LINE Subwoofer 2

19、 wire (positive + negative) Light Purple (PMS 250) 15. Right Back Line Level RB LINE Right back wire (positive + negative) Tan (PMS 466) 16. Left Back Line Level LB LINE Left back wire (positive + negative) Dark Yellow (PMS 104) 17. Left Front Speaker(+) LF SPK (+) left front speaker wire (positive)

20、 White (Not Applicable) 18. Left Front Speaker (-) LF SPK (-) left front speaker wire (negative) White (Not Applicable_/ Black (Pantone Black) 19. Right Front Speaker (+) RF SPK(+) right front speaker wire (positive) Grey (Cool Grey 7C) 20. Right Front Speaker (-) RF SPK (-) right front speaker wire

21、 (negative) Gray (Cool Grey 7C)/Black (Pantone Black) 21. Left Rear Speaker (+) LR SPK (+) left rear speaker wire (positive) Green (361 C) 22. Left Rear Speaker (-) LR SPK (-) left rear speaker wire (negative) Green (361 C)/Black (Pantone Black) 23. Right Rear Speaker (+) RR SPK (+) right rear speak

22、er wire (positive) Violet(2582 C) 24. Right Rear Speaker (-) RR SPK (-) right rear speaker wire (negative) Violet (2582 C)/Black (Pantone Black) 25. Audio Mute (-) MUTE (-) used to silence from source unit Brown (1535 C) 26. Subwoofer/Center Channel Speaker (+) SUB/CTR SPK (+) subwoofer/center chann

23、el (positive) Not Designated 26a. Subwoofer/Center Channel Speaker (-) SUB/CTR SPK (-) subwoofer/center channel (negative) Not Designated 27. Vehicle Speed Pulse VSS (A/C) Vehicle Speed pulse detection signal, digital or analog, A.C. Pink (189 C) 28. Parking Brake PARK BRAKE (+) Parking brake detect

24、ion signal Light Green (358 C) 29. Reverse Gear Detection RVS GEAR Reverse gear detection Violet(2582 C)/ White(Not Applicable) Table 1 Standard Audio Definitions, Abbreviations, and Color Codes CTA-803-B R2017 34 Vehicle Security Terms Standard vehicle security terms shall be those indicated in Tab

25、le 2, Column A. 4.1 Abbreviations of Vehicle Security Terms Standard vehicle security terms shall be abbreviated as indicated in Table 2, Column B. 4.2 Definitions of Vehicle Security Terms Standard vehicle security terms shall be defined as indicated in Table 2, Column C. 4.3 Labeling The abbreviat

26、ions provided in Table 2; Column B may be used to identify the electrical signals to the installer as applicable. CTA-803-B R2017 4Column A Column B Column C Column D Wire Abbr. Def. Color 1. Battery (+) BATT 12 volt uninterrupted wire from the battery Not designated 2. Ignition 1A (+) IGN 1A igniti

27、on switch wire energized with the key in the run & crank position Not designated 3. Ignition 1B (+) IGN 1B ignition switch wire energized with the key in the run & crank position Not designated 4. Ignition 2A (+) IGN 2A ignition switch wire energized with the key in the run position only Not designa

28、ted 5. Ignition 2B (+) IGN 2B ignition switch wire energized with the key in the run position only Not designated 6. Accessory (+) ACC ignition switch wire energized in accessory & run position only Not designated 7. Starter 1 START SOL ignition switch wire which engages the starter motor & is energ

29、ized in the crank position only Not designated 8. Starter 2 START ignition switch wire that is energized in the crank position only (for computer only) Not designated 9. Door Trigger (-) DR TRIG door switch wire Not designated 10. Hood Trigger (-) HD TRIG wire for hood pin switch Not designated 11.

30、Parking Lights (-) PRK LTS wire used to energize parking lights Not designated 12. Headlights (+) HD LTS wire used to energize head lights Not designated 13. Power Door Lock PWR LCK wire used to trigger all doors to lock Not designated 14. Power Door Unlock PWR UNLCK wired used to trigger all doors

31、to unlock Not designated 15. Drivers Motor Lock DR MTR LCK drivers door lock motor wire Not designated 16. Drivers Motor Unlock DR MTR UNLCK drivers door unlock motor wire Not designated 17. Passenger Motor Unlock PASS MTR UNLCK prevents the interior doorlock switch from disarming the aftermarket se

32、curity system Not designated 18. Horn HORN horn trigger Not designated 19. Factory Arm FACT ARM wire used to activate factory alarm (may also lock the doors in some vehicles) Not designated 20. Factory Disarm FACT DISARM wire used to deactivate factory alarm (may also unlock the doors in some vehicl

33、es) Not designated 21. Tach Sense TACH SENSE wire used to determine engine RPM Not designated 22. Key Sense KEY SENSE wire used to determine if the key is in ignition solenoid Not designated 23. Neutral Safety NEUTRAL wire used to determine if the car is in gear Not designated 24. Brake BRAKE wire u

34、sed to determine if brake pedal is depressed Not designated 25. Reverse Light REVERSE wire used to determine if the back-up lights are on Not designated 26a. Left Front Window Roll-up LFW UP wire used to trigger the window up Not designated 26b. Left Front Window Roll-down LFW DOWN wire used to trig

35、ger the window down Not designated 26c. Right Front Window Roll-up RFW UP wire used to trigger the window up Not designated 26d. Right Front Window Roll-down RFW DOWN wire used to trigger the window down Not designated 26e. Left Rear Window Roll-up LRW UP wire used to trigger the window up Not desig

36、nated 26f. Left Rear Window Roll-down LRW DOWN wire used to trigger the window down Not designated 26g. Right Rear Window Roll-up RRW UP wire used to trigger the window up Not designated 26h. Right Rear Window Roll-down RRW DOWN wire used to trigger the window down Not designated 27. Trunk Release T

37、RK REL wire used to activate trunk/motor or solenoid Not designated 28. Wiper WIPER wire used to determine if wipers are on Not designated 29. Trunk Trigger Wire TRK TRG wire used for trunk pin switch Not designated Table 2 Standard Vehicle Security Term Definitions Consumer Technology Association D

38、ocument Improvement Proposal If in the review or use of this document a potential change is made evident for safety, health or technical reasons, please email your reason/rationale for the recommended change to standardsCTA.tech. Consumer Technology Association Technology & Standards Department 1919 S Eads Street, Arlington, VA 22202 FAX: (703) 907-7693 standardsCTA.tech