ANSI CAN ULC-S554-2016 STANDARD FOR WATER BASED AGENT FIRE EXTINGUISHERS (Third Edition).pdf

《ANSI CAN ULC-S554-2016 STANDARD FOR WATER BASED AGENT FIRE EXTINGUISHERS (Third Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI CAN ULC-S554-2016 STANDARD FOR WATER BASED AGENT FIRE EXTINGUISHERS (Third Edition).pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、STANDARD FOR WATER BASED AGENT FIREEXTINGUISHERSPrepared and Published by:NATIONAL STANDARDOF CANADACAN/ULC-S554:2016Approved by:Underwriters Laboratories of Canada (ULC) was established in 1920 byletters patent issued by the Canadian Government. It maintains andoperates laboratories and certificati

2、on services for the examination, testingand certification of appliances, equipment, materials, constructions andsystems to determine their relation to life, fire and property hazards aswell providing inspection services.Underwriters Laboratories of Canada is accredited by the StandardsCouncil of Can

3、ada as a Certification Organization, a Testing Organization,and an Inspection Body under the National Standards System of Canada.ULC Standards develops and publishes standards and other relatedpublications for building construction, security and burglar protection,environmental safety, electrical eq

4、uipment, fire protection equipment, gasand oil equipment, thermal insulation products, materials and systems,energy use in the built environment and electrical utility safety.ULC Standards is a not-for-profit organization and is accredited by theStandards Council of Canada as a Standards Development

5、 Organization.National Standards of Canada developed by ULC Standards conform tothe criteria and procedures established by the Standards Council ofCanada. Such standards are prepared using the consensus principle byindividuals who provide a balanced representation of interests relevant tothe subject

6、 area on a national basis.ULC is represented across Canada as well as many countries worldwide.For further information on ULC services, please contact:Customer Service: 1-866-937-3852National Standard of CanadaA National Standard of Canada is a standard developed by an SCC-accredited Standards Devel

7、opment Organization (SDO), and approvedby the Standards Council of Canada (SCC), in accordance with SCCs:Requirements and Guidance-Accreditation for Standards DevelopmentOrganizations, and Requirements and Guidance-Approval of NationalStandards of Canada Designation.More information on National Stan

8、dard requirements can be found atwww.scc.ca. An SCC-approved standard reflects the consensus of anumber of experts whose collective interests provide, to the greatestpracticable extent, a balance of representation of affected stakeholders.National Standards of Canada are intended to make a significa

9、nt andtimely contribution to the Canadian interest.SCC is a Crown corporation within the portfolio of Industry Canada. Withthe goal of enhancing Canadas economic competitiveness and socialwell-being, SCC leads and facilitates the development and use ofnational and international standards. SCC also c

10、oordinates Canadianparticipation in standards development, and identifies strategies toadvance Canadian standardization efforts. Accreditation services areprovided by SCC to various customers, including product certifiers,testing laboratories, and standards development organizations. A list ofSCC pr

11、ograms and accredited bodies is publicly available atwww.scc.ca.Users should always obtain the latest edition of a National Standard ofCanada from the standards development organization responsible for itspublication, as these documents are subject to periodic review.CORPORATE HEADQUARTERSUnderwrite

12、rs Laboratories of Canada7 Underwriters RoadToronto, Ontario M1R 3A9Telephone: (416) 757-3611Fax: (416) 757-9540REGIONAL OFFICESPACIFIC OFFICE13775 Commerce Parkway, Suite 130Richmond, British Columbia V6V 2V4Telephone: (604) 214-9555Fax: (604) 214-9550EASTERN OFFICE6505, Rte Transcanadienne, Suite

13、330St-Laurent, Qubec H4T 1S3Telephone: (514) 363-5941Fax: (514) 363-7014For further information on ULC standards, please contact:ULC STANDARDS171 Nepean Street, Suite 400Ottawa, Ontario K2P 0B4Telephone: (613) 755-2729Fax: (613) 231-5977E-mail: customerserviceulc.caWeb site: www.ulc.caThe intended p

14、rimary application of this standard is stated in its scope. It is important to note that it remains the responsibility of the user of thestandard to judge its suitability for this particular application.Copies of this National Standard of Canada may be ordered from ULC Standards.CETTE NORME NATIONAL

15、E DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISEPrepared by:ULC StandardsCAN/ULC-S554Third EditionUnderwriters Laboratories Inc.ANSI/UL 8Seventh EditionStandard for Water Based Agent Fire ExtinguishersNovember 25, 2016This harmonized standard has been jointly revised on November 25, 2016

16、to reflect updates to thestandard. For this purpose, UL and ULC Standards have updated the Title Page and Preface datedNovember 25, 2016.ANSI/UL 8-2016Approved byCommitment for AmendmentsThis Standard is issued jointly by Underwriters Laboratories Inc. (UL) and ULC Standards.Amendments to this Stand

17、ard will be made only after processing according to the Standards writingprocedures by UL and ULC Standards.UL and ULC Standards are separate and independent entities and each is solely responsible for itsoperations and business activities. The UL trade names and trademarks depicted in this document

18、 arethe sole property of Underwriters Laboratories Inc. The ULC Standards trade names and trademarksdepicted in this document are the sole property of ULC Standards.ISSN 0317-526X Copyright 2016 ULC StandardsAll rights reserved.No part of this publication may be reproduced in any form, in an electro

19、nic retrieval system orotherwise, whatsoever without the prior permission of the publisher.In Canada, written comments are to be sent to the ULC Standards, 400 - 171 Nepean Street, Ottawa,Ontario K2P 0B4. Proposals should be submitted on a Standards Revision Request Form availablefrom ULC Standards.

20、Copyright 2016 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive p

21、roperty of UL.This ANSI/UL Standard for Safety consists of the Seventh Edition.The most recent designation of ANSI/UL 8 as an American National Standard (ANSI) occurred onNovember 25, 2016. ANSI approval for a standard does not include the Cover Page, TransmittalPages, Title Page (front and back), o

22、r the Preface.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at https:/.To purchase UL Standards, visit Comm 2000 at http:/m- or ca

23、lltoll-free 1-888-853-3503.ULC PreambleInternational Classification for Standards (ICS): 13.220.10This Standard has been developed in compliance with the requirements of SCC for accreditation of aStandards Development Organization.Attention is drawn to the possibility that some of the elements of th

24、is Canadian standard may be thesubject of patents rights. ULC Standards shall not be held responsible for identifying any or all suchpatents rights.Requests for interpretation of this Standard should be sent to ULC Standards. The requests should beworded in such a manner as to permit a “yes” or “no”

25、 answer based on the literal text of the requirementconcerned.This Standard is intended to be used for conformity assessment.The Third Edition of this ULC Standard was based on, and superseded, the Second Edition.The review and action to revise or reaffirm this Standard will not exceed 5 years from

26、the date ofpublication, unless the Standard is identified as fitting within a stabilized category, whereby the review willcommence within the appropriate time frame set out by ULC Standards.TECHNICAL COMMITTEE ON PORTABLE FIRE EXTINGUISHERSName Affiliation Category RegionL. Bourgeois Tritop Inc Gene

27、ral Interest CanadaJ. Di Filippo Kidde Canada Producer CanadaG. Ferris Protection R.T Inc. Producer CanadaF. Goodnight Fire Equipment ManufacturersAssociationProducer USAN. Khan Techin (Technical InspectionNetwork)General Interest CanadaM. Kohli Mark Kohli Consulting General Interest CanadaB. Levitt

28、 Levitt-Safety Ltd. User CanadaN. Murray Consumer Association ofCanadaUser CanadaA. Rees Department of NationalDefenceUser CanadaG. Schultz City of Toronto Regulator OntarioI. Shearer Strike First Corporation Producer CanadaD. Tiller Office of the Fire Marshal Hydrostatic Pressure Test, Clause 40; V

29、ibration Test, Clause 41; Roadability andRough Usage Tests, Clause 42; Burst Strength Test Gauges and Indicators, Clause 52;Nameplate Exposure Tests, Clause 60;b) Moisture absorption; see Salt Spray Corrosion Test, Clause 46; One-Year Time LeakageTest, Clause 50, Nameplate Exposure Tests, Clause 60;

30、c) Flammability, see 6.7;d) Resistance to deterioration due to aging, see Aging Tests Polymeric Materials, Clause 44;One-Year Time Leakage Test, Clause 50; Nameplate Exposure Tests, Clause 60;e) Exposure to light and water, see 44.3 and Nameplate Exposure Tests, Clause 60; andf) Exposure to the exti

31、nguishing agent, see 44.2.6.7 With reference to flammability, polymeric materials shall be classified as type HB, V-0, V-1, V-2, 5VA,or 5VB, in accordance with the Standard for Tests for Flammability of Plastic Materials for Parts in Devicesand Appliances, UL 94. Other nonmetallic materials shall ha

32、ve equivalent characteristics.6.8 An extinguisher shall operate as intended from the minimum storage temperature to 49C (120F),inclusive. Currently recognized minimum storage temperatures are 4C (40F) or lower. See OperatingTemperature Limits Test, Clause 35.NOVEMBER 25, 2016CAN/ULC-S554 ANSI/UL 812

33、6.9 The edges and surfaces of a valve, cap, closure, hose, cylinder, handle, or mounting device shall notbe sufficiently sharp to constitute a risk of injury to persons in intended maintenance and use.6.10 Whenever reference measurements are required to determine that a part as described in 6.9 is n

34、otsufficiently sharp to constitute a risk of injury to persons, the method described in the Standard for Testfor Sharpness of Edges on Equipment, UL 1439, is to be employed.6.11 A hand portable extinguisher shall have a gross weight not exceeding 27 kg (60 lb).6.12 A pressurizing adaptor for a recha

35、rgeable stored pressure type extinguisher shall have threads orother mechanical means for securement to the valve assembly.7 Cylinders7.1 The requirements in this clause do not apply to a cylinder marked as complying with U.S. Departmentof Transportation (DOT), or Canada Transportation of Dangerous

36、Goods Regulations (TDGR), or ASMEspecifications, unless otherwise specifically indicated.7.2 An extinguisher cylinder under the jurisdiction of the DOT or TDGR shall comply with the appropriateDOT or TDGR specifications for shipping containers.7.3 An extinguisher cylinder shall be fabricated of a ma

37、terial having rigidity, durability, and resistance tocorrosion equivalent to:a) An aluminum alloy such as 6061-T6 or 6351-T6, see the Specification for Aluminum andAluminum-Alloy Sheet and Plate, ASTM B209, having a minimum thickness of 0.71 mm (0.028in);b) An aluminum alloy, such as 1100, 1170, or

38、3003 having a minimum thickness of 0.71 mm(0.028 in);c) A mild steel alloy, such as SAE 1010, having a minimum thickness of 0.71 mm (0.028 in); ord) An austenitic stainless steel alloy having a maximum of 0.03 percent carbon content and aminimum thickness of 0.63 mm (0.025 in).7.4 A cylinder assembl

39、ed complete with permanently attached fittings shall be resistant to any corrosiveinfluence of the extinguishing agent. See Agent Exposure Test, Clause 48.7.5 The material of the dome and bottom of a metal cylinder shall be of the same material as the cylinder.7.6 All joints in metal cylinders shall

40、 be threaded, brazed, or welded.Exception: Brazed joints shall not be used on stainless steel cylinders.7.7 For the purpose of these requirements, thickness measurements of the sidewall are to be measuredon uncoated metal. The thickness of the dome and of the bottom is to be measured at several poin

41、ts afterforming and before coating.NOVEMBER 25, 2016 CAN/ULC-S554 ANSI/UL 8 138 Joints8.1 The minimum width of a brazed joint on a cylinder wall shall be at least four times the thickness ofthe sidewall.9 Caps, Valves, Closures, and Pressure Relief9.1 The inside diameter of a fill opening of a recha

42、rgeable-type extinguisher shall be:a) A minimum 19 mm (3/4 in) for an extinguisher having a capacity of 19 L (5 gal) or less;Exception: For coated cylinders, a minimum 38 mm (1-1/2 in ) fill opening is required.b) A minimum 64 mm (2-1/2 in) for an extinguisher having a capacity above 19 L (5 gal).9.

43、2 A collar with external threads shall be constructed so that the cap does not contact the dome or thebottom when the gasket is removed.9.3 A threaded cap, closure, or valve shall engage the collar or the threaded opening by not less thanfour full threads with the gasket in place.9.4 A cap, plug, or

44、 other component, except a pressure gauge or indicator, shall be provided with ameans of relieving pressure when it is removed while the agent chamber is still under pressure. Thepressure shall be relieved with a minimum of two threads engaged.9.5 Closures of rechargeable extinguishers shall resist,

45、 without evidence of damage to the threads, aclosing torque of 35 Nm (25 lbf-ft).9.6 When pressure relief is required under the jurisdiction of the Department of Transportation (DOT) orCanada Transportation of Dangerous Goods Regulations (TDGR), it shall be in accordance with theCompressed Gas Assoc

46、iation pamphlet CGA S-1.1 Pressure Relief Device Standards.10 Gaskets and “O” rings10.1 A gasket or an O ring shall be retained in a recess or the equivalent, in the cap, collar, or valve.A gasket or an O ring of a rubber-like material shall be of thickness to provide a compression-type sealand shal

47、l fit snugly against the cap or head. See Elastomeric Parts Test, Clause 45.NOVEMBER 25, 2016CAN/ULC-S554 ANSI/UL 81411 Gas Cartridges, Cylinders, and Regulators11.1 A gas cartridge and a cylinder under the jurisdiction of the Department of Transportation (DOT) orCanada Transportation of Dangerous G

48、oods Regulations (TDGR) shall be constructed, tested, marked,and charged in accordance with the applicable shipping container specifications of the DOT or TDGR.11.2 A gas cylinder assembly shall be provided with a pressure-relief device as required by applicableDOT or TDGR regulations. A gas cylinde

49、r assembly not under the jurisdiction of the DOT or the TDGRshall be provided with a pressure relief appropriate for the cylinder used.11.3 Gas cartridges shall be provided with an anti-recoil cap for use in storage and transit.11.4 Gas cartridges or cylinder assemblies shall be securely attached to the extinguisher.11.5 Gas cylinders of the seated-valve type shall be provided with a pressure-relief disc held in place bya nut which vents and prevents recoil.11.6 A seated-valve type gas cylinder assembly shall be provid