ANSI CAN CSA-C22.2 NO.60335-2-24-17-2017 Household and similar electrical appliances - Safety - Part 2-24 Particular requirements for refrigerating appliances ice-cream appliances .pdf

《ANSI CAN CSA-C22.2 NO.60335-2-24-17-2017 Household and similar electrical appliances - Safety - Part 2-24 Particular requirements for refrigerating appliances ice-cream appliances .pdf》由会员分享，可在线阅读，更多相关《ANSI CAN CSA-C22.2 NO.60335-2-24-17-2017 Household and similar electrical appliances - Safety - Part 2-24 Particular requirements for refrigerating appliances ice-cream appliances .pdf（119页珍藏版）》请在麦多课文档分享上搜索。

1、CAN/CSA-C22.2 No. 60335-2-24:17Household and similar electrical appliances Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers(IEC 60335-2-24:2010+A1:2012, MOD)CAN/CSA-C22.2 No. 60335-2-24:17(IEC 60335-2-24:2010+A1:2012, MOD)National Standard o

2、f Canada IEC 2012. CSA Group 2017. All rights reserved. Unauthorized reproduction is strictly prohibited.Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canad

3、a. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the co

4、ntent of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use,

5、 its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents complianc

6、e with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,

7、INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR

8、POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity

9、 or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all

10、use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publ

11、ishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise

12、noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document

13、 may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property r

14、ights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determina

15、tion of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in elect

16、ronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ relevant clause, table, and/or figure number; wording ofthe proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit

17、 CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2017 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyright

18、s, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Second Edition. The most recent designation ofANSI/UL 60335-2-24 as an American National Standard (ANSI) occurred on April 28, 2017. ANSIapproval for

19、 a standard does not include the Cover Page, Transmittal Pages, Title Page (front andback), or the Preface. The National Difference Page and IEC Foreword are also excluded from theANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to

20、 UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at https:/.To purchase UL Standards, visit Comm 2000 at http:/m- or calltoll-free 1-888-853-3503.CONTENTSPREFACE 6NATIONAL DIFFERENCES .9FOREWORD .10INTRODUCTION .141

21、Scope 152 Normative references .163 Terms and definitions 184 General requirement .205 General conditions for the tests 216 Classification 237 Marking and instructions 248 Protection against access to LIVE PARTS 319 Starting of MOTOR-OPERATED APPLIANCES 3110 Power input and current .3111 Heating 331

22、2 Void .3713 Leakage current and electric strength at operating temperature 3714 Transient overvoltages 3815 Moisture resistance .3815.106DV.1 Component washing test .3915.107DV.1 Overflow test 4016 Leakage current and electric strength .4117 Overload protection of transformers and associated circui

23、ts 4218 Endurance .4219 Abnormal operation .4220 Stability and mechanical hazards .4521 Mechanical strength .5021.103DV.1 Shelf and drawer impact and static load 5121.104DV.1 Component restraint .5222 Construction .5222.112DV.1 Door latch release test .6422.117DV.1 Separation of circuits .6723 Inter

24、nal wiring 6724 Components .6824.103DV.1 Switches and controllers 6925 Supply connection and external flexible cords 7126 Terminals for external conductors .7327 Provision for earthing 7328 Screws and connections .7429 CLEARANCES, CREEPAGE DISTANCES and solid insulation 7430 Resistance to heat and f

25、ire 7531 Resistance to rusting 7532 Radiation, toxicity and similar hazards .75AnnexesAPRIL 28, 2017 CAN/CSA-C22.2 NO. 60335-2-24:17 UL 60335-2-24 3Annex A (informative) Routine testsA.101DV.1 Refrigerant leakage test .79Annex C (normative) Ageing test on motorsAnnex D (normative) Thermal motor prot

26、ectorsAnnex P (informative) Guidance for the application of this standard to appliances used in warmdamp equable climates5 General conditions for the tests 8211 Heating 82Annex AA (normative) Locked-rotor test of fan motorsAnnex BB (informative) Method for accumulation of frostAnnex CC (normative) N

27、on-sparking “n” electrical apparatus11 Supplementary requirements for non-sparking luminaires 8816 General supplementary requirements for apparatus producing arcs, sparks or hot surfaces . .8817 Supplementary requirements for enclosed-break devices and non-incendive componentsproducing arcs, sparks

28、or hot surfaces 8818 Supplementary requirements for hermetically sealed devices producing arcs, sparks or hotsurfaces .8819 Supplementary requirements for sealed devices producing arcs, sparks or hot surfaces .8819.1 Non-metallic materials 8819.6 Type tests .8920 Supplementary requirements for restr

29、icted-breathing enclosures protecting apparatus producingarcs, sparks or hot surfaces 89Annex DD (informative) Sound manufacturing practice for compression-type appliances which useflammable refrigerantAnnex DVA (normative) Component Standards Cross ReferenceAnnex 101.DVA (normative) Hazard Assessme

30、nt for Moving Parts; and Probes to Simulate Accessto Hazardous Parts by Children101.DVA.1 Hazard Assessment for Moving Parts .92Annex 101.DVB (normative) Ice Dispenser DurabilityAPRIL 28, 2017CAN/CSA-C22.2 NO. 60335-2-24:17 UL 60335-2-244101.DVB.1 Ice dispensing system mechanical strength 96101.DVB.

31、2 Ice dispensing system durability tests .96Annex 101.DVC (normative) Door Hinge Strength Test101.DVC.1 Door Hinge Strength Test .98Annex 101.DVD (normative) Resistance to Heat and Fire101.DVD.1 General .99101.DVD.2 Thermal Insulation Flammability 99101.DVD.3 Flame Spread Test and Radiant Panel Test

32、 100101.DVD.4 Burnout Test Impedance Protected Motors .101101.DVD.5 Non-Metallic Material Flammability in Proximity to Electrical Connections . . . .101101.DVD.6 Nichrome Wire Test .106Annex 101.DVE (informative) English and French Translations of MarkingsBibliographyAPRIL 28, 2017 CAN/CSA-C22.2 NO.

33、 60335-2-24:17 UL 60335-2-24 5PREFACEThis is the harmonized CSA Group and UL standard for particular requirements for refrigeratingappliances, ice-cream appliances and ice makers. It is the second edition of CAN/CSA-C22.2 No.60335-2-24, and the second edition of UL 60335-2-24. This edition of CAN/CS

34、A-C22.2 No. 60335-2-24supersedes the previous edition published on August 21, 2006 and replaces CSA C22.2 No. 63-93,Household Refrigerators and Freezers. This edition of UL 60335-2-24 supersedes the previous editionpublished on August 21, 2006.This harmonized standard is based on IEC Publication 603

35、35-2-24: Edition 7.1, Household and SimilarElectrical Appliances Safety Part 2-24: Particular Requirements for Refrigerating Appliances,Ice-Cream Appliances and Ice-Makers, issued May 2012. IEC 60335-2-24 is copyrighted by the IEC.This harmonized Standard was prepared by CSA Group and Underwriters L

36、aboratories Inc. (UL). Theefforts and support of the appliance manufacturing industry are gratefully acknowledged.This standard is considered suitable for use for conformity assessment within the stated scope of thestandard.This Standard was reviewed by the CSA Subcommittee on Household Appliances f

37、or Refrigeration underthe jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSAStrategic Steering Committee on Requirements for Electrical Safety, and has been formally approved bythe CSA Technical Committee. This Standard was also reviewed and approved by ULs S

38、tandardsTechnical Panel for Household Refrigerators and Freezers, STP 250.This Standard has been approved as a National Standard of Canada by the Standards Council of Canada(SCC) and approved by the American National Standards Institute (ANSI) for publication as an AmericanNational Standard.Applicat

39、ion of StandardWhere reference is made to a specific number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the us

40、ers of the standard to judge its suitability for their particular purpose.CAN/CSA-C22.2 No. 60335-2-24 is to be used in conjunction with the first edition of CAN/CSA-C22.2 No.60335-1:11. The requirements for refrigerating appliances, ice-cream appliances and ice makers arecontained in this Part 2 St

41、andard and CAN/CSA-C22.2 No. 60335-1:11. Requirements of this Part 2Standard, where stated, amend the requirements of CAN/CSA-C22.2 No. 60335-1:11. Where a particularsubclause of CAN/CSA-C22.2 No. 60335-1:11 is not mentioned in CAN/CSA-C22.2 No. 60335-2-24, theCAN/CSA-C22.2 No. 60335-1:11 subclause

42、applies.UL 60335-2-24 is to be used in conjunction with the fifth edition of UL 60335-1. The requirements forrefrigerating appliances, ice-cream appliances and ice makers are contained in this Part 2 Standard andUL 60335-1. Requirements of this Part 2 Standard, where stated, amend the requirements o

43、f UL 60335-1.Where a particular subclause of UL 60335-1 is not mentioned in UL 60335-2-24, the UL 60335-1subclause applies.APRIL 28, 2017CAN/CSA-C22.2 NO. 60335-2-24:17 UL 60335-2-246Level of HarmonizationThis standard adopts the IEC text with national differences. This standard is published as an e

44、quivalentstandard for CSA and UL.An equivalent standard is a standard that is substantially the same in technical content, except as follows:a) Technical national differences are allowed for national differences resulting from conflicts incodes and governmental regulations as well as those recognize

45、d as being in accordance withNAFTA Article 905, for example, because of fundamental climatic, geographical, technological,or infrastructural factors, scientific justification, or the level of protection that the countryconsiders appropriate.b) Presentation is word for word except for editorial chang

46、es that do not alter the technicalcontent of the standard. Examples of editorial changes include:1) different font sizes, figure sizes, and table sizes;2) minor variations in format, such as indentation and pagination;3) font appearance (including the use of italic or bold text or uppercase or lower

47、caseletters);4) the use of a symbol (e.g., A or %) rather than the word (Ampere or percent), or theword rather than the symbol;5) inclusion of inch-pound units for informational purposes;6) corrections of misprints or typographical errors;7) bilingual column headings or figure captions on a common t

48、able or figure in abilingual edition;8) change from first-angle to third-angle drawing;9) addition of a statement: “This is a first-angle drawing”; and10) substitution of a point (.) for a comma (,) as the decimal marker.All national differences from the IEC text are included in the CSA Group and UL

49、 versions of the standard.While the technical content is the same in each organizations version, the format and presentation maydiffer.Reasons for Differences From IECDifferences from the IEC are being added in order to address safety and regulatory situations present inthe US and Canada.APRIL 28, 2017 CAN/CSA-C22.2 NO. 60335-2-24:17 UL 603