ANSI ASABE S588.1-2016 Uniform Terminology for Air Quality.pdf

《ANSI ASABE S588.1-2016 Uniform Terminology for Air Quality.pdf》由会员分享，可在线阅读，更多相关《ANSI ASABE S588.1-2016 Uniform Terminology for Air Quality.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/ASABE S588.1 NOV2016 Uniform Terminology for Air Quality American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of members worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and biological systems.

2、 ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the Society; principally agricultural field equipment, farmstead equipment, structures, soil and water resource management

3、, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industry or tr

4、ade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protecting the

5、mselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are designated as “ASAE”, regardless of the revision approval date. Newly developed Standards, Engineering Practices and Data ap

6、proved after July of 2005 are designated as “ASABE”. Standards designated as “ANSI” are American National Standards as are all ISO adoptions published by ASABE. Adoption as an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteri

7、a for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimi

8、ty. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revised or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodically to reaffirm,

9、revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA, phone 269-429-0300, fax 269-429-3852, hqasabe.org ANSI/ASABE S588.1 NOV2016 Copyright American Society of Agricultural

10、and Biological Engineers 1 ANSI/ASABE S588.1 NOV2016 Approved November 2016 as an American National Standard Uniform Terminology for Air Quality Developed by the Environment Air Quality subcommittee and approved by the Structures and Environment Division. Adopted as an ASABE standard July 2012. Appr

11、oved as an American National Standard July 2012. Revised and approved as an American National Standard November 2016. Keywords: Air Quality, Dust, Odor, Terminology 1 Purpose and scope 1.1 The purpose of this Standard is to establish uniformity in terms used within the field of outdoor rural air qua

12、lity. This Standard is also to serve as a focal point for the development of new useful terms associated with air quality in rural areas. 1.2 By these definitions, results from existing and newly developed measurement techniques and equipment can be compared and rated as to intended purpose and perf

13、ormance. 2 Normative references 2.1 The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies unless noted. For undated references, the latest approved edition of the referenced document (including any amendments)

14、applies. 2.2 Standard procedures for the determination of values for many of the terms defined herein may be found in: ASTM E679-04, Standard Practice for Determination of Odor and Taste Thresholds by a Forced-Choice Ascending Concentration Series Method of Limits ASTM E253-08, Standard Terminology

15、Relating to Sensory Evaluation of Materials and Products CEN EN13725, Air Quality Determination of Odor Concentration by Dynamic Olfactometry ASAE S292.5, Uniform Terminology for Rural Waste Management ASAE S582 MAR2005, Cotton Gins Method of Utilizing Emission Factors in Determining Emission Parame

16、ters ANSI/ASABE S613-1, Tractors and self-propelled machinery for agriculture Air quality systems for cabs Terminology and overview ISO 5492, Sensory analysis Vocabulary ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results Part 1: general principle and definitions 3 Defin

17、itions 3.1 abatement: Controlling emissions (ASAE S582). ANSI/ASABE S588.1 NOV2016 Copyright American Society of Agricultural and Biological Engineers 2 3.2 adverse health effect: A health effect from exposure to air contaminants that may range from relatively mild temporary conditions (such as eye

18、or throat irritation, shortness of breath, or headaches) to permanent and serious conditions (such as birth defects, cancer or damage to lungs, nerves, liver, heart, or other organs). 3.3 aerobic: In the presence of oxygen. 3.4 aerodynamic equivalent diameter (AED): The diameter of a unit density sp

19、here (i.e. 1.00 g/cm3) that would have the same settling velocity as the particle or aerosol in question (ASAE S582). 3.5 aerosol: Small droplets of liquid or particles of solid matter suspended in air that are fine enough in particle size, 0.01 to 100 m (aerodynamic diameter), to remain dispersed f

20、or a period of time (ANSI/ASABE S613-1). A system of colloidal particles dispersed into air or gas, e.g. smoke or fog (ASAE S292.5). 3.6 agricultural burning: The intentional use of fire for vegetation management in areas such as agricultural fields, orchards, rangelands, and forestlands. 3.7 air: “

21、Pure” air is a mixture of gases containing about 78% nitrogen, 21% oxygen, less than 1% of carbon dioxide and other gases, and varying amounts of water vapor. 3.8 air basin: A land area with generally similar meteorological and geographical conditions throughout. To the extent possible, air basin bo

22、undaries are defined along political boundary lines and include both the source and receptor areas. 3.9 air inlet: A passage by which air enters an animal building or other enclosed place. 3.10 air outlet: A passage by which air leaves an animal building or other enclosed place. 3.11 air pollution:

23、The presence in the outdoor atmosphere of any one or more substances or pollutants in quantities, which are or may be harmful or injurious to human health or welfare, animal or plant life, or property (health effects standard), or unreasonably interfere with enjoyment of life or property, including

24、outdoor recreation (nuisance standard) (ASAE S582). 3.12 air pollution abatement system: Devices used to remove pollutants from an exit air stream to bring emissions into compliance with regulations (ASAE S582). 3.13 air pollution control device: An apparatus that is part of an air pollution abateme

25、nt system (ASAE S582). 3.14 air quality: A term indicative of the quantity of pollutants present to which people, animals, plants, and property are exposed relative to established baseline values (ASAE S582). 3.15 air quality index (AQI): A numerical index used for reporting severity of ambient air

26、pollution levels to the public. The AQI currently incorporates five criteria pollutants (ozone, particulate matter, carbon monoxide, sulfur dioxide, and nitrogen dioxide) into a single index. The AQI also incorporates the 8-hour ozone standard and the 24-hour PM2.5 standard into the index calculatio

27、n. AQI ranges from 0 (good air quality) to 500 (hazardous air quality). The index number increases as air pollution increases, increasing the likelihood of health effects. 3.16 air quality standards: Threshold values that limit either the emission rate, concentration emitted from a source, or the co

28、ncentration of a pollutant in the ambient air over a given time period (ASAE S582). 3.17 airborne particulates: Solid particles or liquid droplets found in the atmosphere that include, but are not limited to: windblown dust, emissions from industrial processes, and motor vehicle or non-road engine e

29、xhausts (ASAE S582). 3.18 ambient air: Any unconfined portion of the atmosphere; open air; outside surrounding air; air that is accessible to the public (ASAE S582). ANSI/ASABE S588.1 NOV2016 Copyright American Society of Agricultural and Biological Engineers 3 3.19 ambient concentrations: Concentra

30、tions of particulate matter or gaseous atmospheric components in the vicinity of a site that are unaffected by site-related activities. Ambient concentrations are some-times referred to as “local background.” 3.20 ambient monitoring: All forms of monitoring conducted beyond the immediate influence o

31、f any single discharge source (ASAE S582). 3.21 ammonia (NH3): An odorous gas containing one nitrogen and three hydrogen atoms. Ammonia can also contribute to the formation of fine particulate matter. Ammonia is generated naturally by the decomposition of proteins or other nitrogen-containing compou

32、nds, or commercially by chemical processes. 3.22 anaerobic: In the absence of oxygen. 3.23 anisokinetic sampling: Non isokinetic sampling. See isokinetic sampling. 3.24 anosmic: Lacking capability to sense or detect odor, as compared to the general population. A person could be anosmic to all odors

33、or have a specific anosmia to some odorants. 3.25 area source: An origin of air pollutant emissions that occur from a definable area or surface that is sufficiently large to exhibit a continuous gradient of source concentrations, and where the physical scale precludes its classification as a point s

34、ource. Area source in regulatory use defines a facility (collection of sources) that has emissions below the EPA specified major source threshold for pollutants. 3.26 aroma: Perception resulting from stimulating the olfactory receptors; in a broader sense, the term refers to the combination of sensa

35、tions resulting from stimulation of the nasal cavity (ASTM E253-04). 3.27 atmospheric stability: The tendency of the atmosphere to resist vertical motion, and thus turbulence and dispersion, is termed “stability” and is directly related to the change in temperature and wind speed with height. 3.28 a

36、tmospheric stability class: A grouping of meteorological conditions categorized according to their influence on atmospheric stability. 3.29 attainment: The successful achievement of concentration standards (ASAE S582). 3.30 attainment area: A geographic region where levels of a criteria air pollutan

37、t meet the health-based primary standard (NAAQS) for that pollutant. An area considered as having air quality as good as or better than the NAAQS as defined in the U.S. Clean Air Act. An area may have an acceptable level for one criteria pollutant, but may have unacceptable levels for others (ASAE S

38、582). 3.31 best available control measures (BACM): The most effective measures for controlling small or dispersed particulates and other emissions from sources such as roadway dust, soot and ash from woodstoves and open burning of brush, timber, grasslands, or trash (ASAE S582). 3.32 best available

39、control technology (BACT): An emission limitation based on the maximum degree of emission reduction (with consideration given to the technical practicability, energy, environmental, and economic reasonableness of reducing or eliminating emissions from the facilities exhausts) achievable through appl

40、ication of production processes and available methods, systems, and techniques. BACT does not permit emissions in excess of those allowed under any applicable Clean Air Act provisions. This is typically defined for cotton gins as high efficiency cyclones (1D3D or 2D2D) on all centrifugal fan exhaust

41、s and covered condenser drums with 70-100 fine-mesh screens on all axial fan exhausts (ASAE S582). 3.33 best-estimate criterion: An interpolated odor concentration value equal to the geometric mean of the last concentration at which an assessor makes an incorrect selection and the next higher presen

42、tation concentration (a correct selection). 3.34 best management practices (BMP): Procedures or controls that can be implemented to prevent or reduce pollution. ANSI/ASABE S588.1 NOV2016 Copyright American Society of Agricultural and Biological Engineers 4 3.35 bioaerosol: An airborne dispersion of

43、particles containing whole or parts of biological entities, such as bacteria, viruses, dust mites, fungal hyphae, or fungal spores. 3.36 carbon dioxide (CO2): An inorganic gaseous compound containing one carbon atom and two oxygen atoms. Carbon dioxide is an important greenhouse gas and is the princ

44、ipal anthropogenic greenhouse gas that affects the Earths radiative balance. Carbon dioxide is produced by all animals, plants, fungi, and microorganisms during respiration and is used by plants during photosynthesis. Carbon dioxide is also generated as a natural by-product of the decomposition of o

45、rganic matter and the combustion of fossil fuels or vegetative matter, among other chemical processes. 3.37 Clean Air Act (CAA): Originally passed in 1963, the federal law that provides the enabling legislation for regulating air pollution. States will have State CAAs that provide enabling legislati

46、on for the respective Local and State Air Pollution Regulatory Agencies (SAPRA). The current national air pollution control program is based on the 1970 version of the law. Substantial revisions in federal law were made by the 1990 Clean Air Act Amendments (CAAA) (ASAE S582). 3.38 collection efficie

47、ncy: The fraction of particles of a given size entering a separation device (e.g. a filter, PM sampler, or abatement device) that are removed from the inlet flow stream by the device and not allowed to pass through. 3.39 collection efficiency curve: A curve of particle diameter versus collection eff

48、iciency. 3.40 concentration: The relative content of a component in a mixture or solution (ANSI/ASABE S613-1, ASAE S582). 3.41 contaminant: An undesirable component in any material or system. A harmful, irritating or nuisance airborne material that may be in the form of gases, vapors, aerosols, or p

49、articulate matter (ANSI/ASABE S613-1, ASAE S582). 3.42 contamination: Introduction into water, air, and soil of microorganisms, chemicals, toxic substances, wastes, or wastewater in a concentration that makes the medium unfit for its next intended use. Also applies to surfaces of objects, buildings, and various household and agricultural use products (ASAE S582). Any introduction into the environment (water, air, or soil) of microorganisms, soil, chemicals, wastes or wastewater that increase concentrations of these constituents beyond