ANSI ASABE 802-2014 Landscape Irrigation Sprinkler and Emitter Standard.pdf

《ANSI ASABE 802-2014 Landscape Irrigation Sprinkler and Emitter Standard.pdf》由会员分享，可在线阅读，更多相关《ANSI ASABE 802-2014 Landscape Irrigation Sprinkler and Emitter Standard.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、 ASABE/ICC 802-2014Landscape Irrigation Sprinklerand Emitter StandardAmerican National StandardInternational Code Council500 New Jersey Avenue, NW, 6thFloorWashington, D.C. 20001Approved August 5, 2014American National Standards Institute1899 L Street, NW, 11thFloorWashington, D.C. 2003614-10085_ASA

2、BE-ICC_802-2014_Lndscp_Irrgtn_Stndrd_TitlePg_Final.indd 1 9/9/2014 1:51:35 PMASABE/ICC 8022014 Landscape Irrigation Sprinkler and Emitter Standard(ICC 8022014)First Printing: September 2014ISBN: 978-1-60983-595-8COPYRIGHT 2014byINTERNATIONAL CODE COUNCIL, INC.ALL RIGHTS RESERVED. This ASABE/ICC 8022

3、014 Landscape Irrigation Sprinkler and Emitter Standard (ICC 8022014) is a copyrighted work owned by the International Code Council, Inc. Without advance written permission from the copy-right owner, no part of this book may be reproduced, distributed, or transmitted in any form or by any means, inc

4、luding, withoutlimitation, electronic, optical or mechanical means (by way of example, and not limitation, photocopying, or recording by or inan information storage retrieval system). For information on permission to copy material exceeding fair use, please contact: Pub-lications, 4051 Flossmoor Roa

5、d, Country Club Hills, IL 60478-5795.Trademarks: “ICC,” the International Code Council logo and “Landscape Irrigation Sprinkler and Emitter Standard (ICC8022014)” are trademarks of the International Code Council, Inc. “ASABE” and the “American Society of Agricultural andBiological Engineers” logo ar

6、e trademarks of the American Society of Agricultural and Biological Engineers.PRINTED IN THE U.S.A.ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARD iiiAmericanNationalStandardApproval of an American National Standard requires verification by ANSI that the requirements for due pr

7、ocess, consensus andother criteria for approval have been met by the standards developer.Consensus is established when, in the judgement of the ANSI Board of Standards Review, substantial agreement has been reachedby directly and materially affected interests. Substantial agreement means much more t

8、han a simple majority, but not necessarily una-nimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution.The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone,

9、whetherhe or she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes or proce-dures not conforming to the standards.The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of anyAm

10、erican National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an AmericanNational Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to thesecretariat or sponsor whose name appears on the

11、 title page of this standard.CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the AmericanNational Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers ofAmerican National St

12、andards may receive current information on all standards by calling or writing the American National Stan-dards Institute.iv ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARD ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARD vFOREWORDIntroductionIn 2010, upon

13、direction from the ICC Board of Directors, the ICC Standards Council appointed a consensus committee to develop astandard to cover the performance, design and testing of turfgrass and landscape irrigation sprinklers. In 2012, ICC and ASABEagreed to collaborate to develop the standard, dual-designati

14、ng it as an ASABE/ICC standard. ASABE provided permission toincorporate material from several ASABE standards related to irrigation into the standard in order to coordinate the content ofthe standards.DevelopmentThis is the first edition of the American Society of Agricultural and Biological Enginee

15、rs (ASABE)/International Code Council(ICC) Landscape Irrigation Sprinkler and Emitter Standard. This standard was developed by the ICC Consensus Committee onLandscape Irrigation Emission Devices (IS-IEDC) that operates under ANSI-approved ICC Consensus Procedures for the develop-ment of ICC standard

16、s. Both ICC and ASABE are approved by ANSI as Accredited Standards Developers; however, this stan-dard was developed under ICCs ANSI-approved Standard Development Procedures alone.The meetings of the IS-IEDC Consensus Committee were open to the public and interested individuals and organizations fro

17、macross the country participated. Views and objections were solicited through several public comment periods. All views and objec-tions were considered by the consensus committee and an effort was made toward their resolution. A vote by the consensus commit-tee approved this standard.The technical c

18、ontent of currently published codes and documents on sprinklers was reviewed and considered by the committee.While there were many similarities among the practices and documents reviewed, there were marked philosophical differences thatwere considered by the committee. The requirements in ASABE/ICC

19、8022014 are based on the intent to establish provisionsconsistent with the scope of the ICC family of codes and standards that adequately protect public health, safety and welfare; provisionsthat do not necessarily increase construction costs and provisions that do not unnecessarily restrict the use

20、 of new materials, technol-ogies or designs.AdoptionASABE/ICC 8022014, Landscape Irrigation Sprinkler and Emission Standard is available for reference and use by jurisdictionsand codes internationally. Its use within a governmental jurisdiction is intended to be accomplished through adoption by refe

21、rence inaccordance with proceedings establishing the jurisdictions law. InterpretationsRequests for interpretations on the provisions of ASABE/ICC 8022014 should be addressed to: ICC, Central Regional Office,4051 Flossmoor Road, Country Club Hills, IL 60478.MaintenanceSubmittal of ProposalsAll ICC s

22、tandards are revised as required by ANSI. Proposals for revising this edition are welcome. Please visit the ICC website atwww.iccsafe.org for the official “Call for Proposals” announcement. A proposal form and instructions can also be downloadedfrom www.iccsafe.org.ICC, ASABE, its members and those

23、participating in the development of ASABE/ICC 8022014 do not accept any liability result-ing from compliance or noncompliance with the provisions of ASABE/ICC 8022014. Neither ICC nor ASABE have the poweror authority to police or enforce compliance with the contents of this standard. Only the govern

24、mental body that enacts this stan-dard into law has such authority.International Code Council Consensus Committee on Landscape Irrigation Emission Devices (IS-IEDC)Consensus Committee SCOPE: The Landscape Irrigation Emission Devices Standard Consensus Committee (IS-IEDC) shallhave primary responsibi

25、lity for minimum requirements to safeguard the public health, safety and general welfare along withproduct performance, design, durability and testing requirements for landscape irrigation emission devices. The requirementscontained in the International Codes pertaining to these situations shall be

26、coordinated with the standards developed by the IS-IEDC Consensus Committee.FOREWORDvi ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARDThis standard was processed and approved for submittal to ANSI by the ICC Consensus Committee on Landscape Irrigation Emis-sion Devices (IS-IEDC

27、). Committee approval of the standard does not necessarily imply that all committee members voted for itsapproval.Representatives on the Consensus Committee are classified in one of three voting interest categories, General Interest (G), UserInterest (U) and Producer Interest (P). The committee has

28、been formed in order to achieve consensus as required by ANSIEssential Requirements. At the time it approved this standard, the IS-IEDC Consensus Committee consisted of the followingmembers:David Bracciano (P), Tampa Bay Water, Clearwater, FloridaDon Clark (P), Rain Bird Corporation, San Diego, Cali

29、forniaLorri Dennis (G), City of Carrollton, Carrollton, TexasMichael Dukes, PhD (U), University of Florida, Institute of Food and Agricultural Sciences, Gainesville, Florida Joanna Kind (G), U.S. Environmental Protection Agency - WaterSense Program, Santa Fe, New MexicoJeff Kremicki (P), Hunter Indu

30、stries, San Marcos, CaliforniaTimothy Malooly (U), Water in Motion Inc., Plymouth, Minnesota Brent Q. Mecham (P), Irrigation Association, Falls Church, Virginia Lynn S. Niblock (G), Iredell County Inspections, Statesville, North CarolinaJulie Saare-Edmonds (G), State of California, Sacramento, Calif

31、ornia Kent Sovocool (U), Alliance for Water Efficiency, Las Vegas, NevadaTravis Tsunemori (U), American Society of Agricultural and Biological Engineers, St. Joseph, MichiganSecretary: Shawn Martin, Director of PMG Activities, Plumbing, Mechanical and Fuel Gas Group, International Code Coun-cil, Pit

32、tsburgh, PennsylvaniaVoting Membership in Each CategoryInterest CategoriesGeneral Interest: Individuals assigned to the General Interest category are those who represent the interests of an entity, includingan association of such entities, representing the general public, or entities that promulgate

33、 or enforce the provisions within thecommittee scope. These entities include consumers and government regulatory agencies.User Interest: Individuals assigned to the User Interest category are those who represent the interests of an entity, including anassociation of such entities, which is subject t

34、o the provisions or voluntarily utilizes provisions within the committee scope.These entities include academia, applied research laboratory, building owner, design professional, government nonregulatoryagency, insurance company, private inspection agency and product certification/evaluation agency.P

35、roducer Interest: Individuals assigned to the Producer Interest category are those who represent the interests of an entity,including an association of such entities, which produces, installs or maintains a product, assembly or system subject to the pro-visions within the committee scope. These enti

36、ties include builder, contractor, distributor, laborer, manufacturer, material asso-ciation, standards promulgator, testing laboratory and utility.NOTEMultiple Interests: Individuals representing entities in more than one of the above interest categories, one of which isa Producer Interest, are assi

37、gned to the Producer Interest. Individuals representing entities in the General Interest and User Interestcategories are assigned to the User Interest.Category NumberGeneral (G) 4User (U) 4Producer (P) 4TOTAL 12ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARD viiTABLE OF CONTENT

38、SCHAPTER 1 ADMINISTRATIVEPROVISIONS . . . . . . . . . . . . . . . . . . . . . 1Section101 Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1102 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1103 Applicability. . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . 1104 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1105 Referenced Documents. . . . . . . . . . . . . . . . . . . . . . 1106 Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1CHAPTER 2 DEFINITIONS. . . . . . . . . . . . . .

40、. . . . . . . 3Section201 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3202 Defined Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3203 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4CHAPTER 3 GENERAL REQUIREMENTSFOR SPRINKLER

41、SAND BUBBLERS . . . . . . . . . . . . . . . . . . 7Section301 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7302 Sprinkler and Bubbler Design Requirements. . . . . 7303 Sprinkler and Bubbler Performance Requirementsand Test Methods . . . . . . . . . . . . . . . . . . .

42、. . . . . 7304 Sprinkler and Bubbler Product Marking . . . . . . . 10CHAPTER 4 REQUIREMENTS FORMICROIRRIGATION EMITTERS AND MICROSPRAYS . . . . . . . . . . . . . . . . . . 13Section401 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13402 Microirrigation Emission DeviceDesi

43、gn Requirements . . . . . . . . . . . . . . . . . . . . 13403 Microirrigation Emission Device PerformanceRequirements and Test Methods . . . . . . . . . . . 13404 Microirrigation Emission DeviceProduct Marking. . . . . . . . . . . . . . . . . . . . . . . . 16CHAPTER 5 REFERENCED STANDARDS . . . . .

44、. 19viii ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARD ASABE/ICC-8022014 LANDSCAPE IRRIGATION SPRINKLER AND EMITTER STANDARD 1CHAPTER 1ADMINISTRATIVE PROVISIONSSECTION 101PURPOSE101.1 Purpose. This standard is intended to establish mini-mum requirements for landscape irrigati

45、on emission devicesto ensure adequate safety and performance, specify testingmethods used to quantify product performance to enablecomponent selection and specification in irrigation systems,and promote uniformity in classifying, rating and markinglandscape irrigation emission devices.SECTION 102SCO

46、PE102.1 Scope. This standard shall apply to sprinklers and emit-ters intended to dispense water from landscape irrigation sys-tems onto a landscape.SECTION 103APPLICABILITY103.1 Applicability. This standard shall apply to sprinklers andemitters designed by the manufacturer for utilization withinland

47、scape irrigation systems. This standard shall not apply tosprinklers and emitters for use exclusively within agriculturalirrigation systems or hose-end watering products or valve-in-head devices.SECTION 104CONVENTIONS104.1 Conventions. Dimensions that are not stated as “maxi-mum or minimum” are abso

48、lute. All dimensions are subjectto conventional industry standards.104.2 Units. Dimensions that are not stated shall be providedin inch/pound format with SI (metric) units provided inparentheses. References to gallons refer to U.S. gallons.SECTION 105REFERENCED DOCUMENTS105.1 Reference documents. Th

49、e codes and standards refer-enced in this standard shall be considered part of the require-ments of this standard to the prescribed extent of each suchreference. Chapter 5 contains a complete list of all referencedstandards.SECTION 106MATERIALS106.1 Materials. Landscape irrigation emission devices shallbe resistant to UV degradation o